• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.252-255
• /
• 1999

The effect of calcination temperature(1st and 2nd calcining at 110$0^{\circ}C$ , 120$0^{\circ}C$ and 130$0^{\circ}C$ respectively) on physical properties of BMNT Ceramics ware investigated. The optimum 1st and 2nd calcination temperature were 120$0^{\circ}C$ , and sintering temperature was 155$0^{\circ}C$. In this condition, the sintering density was 7.53 [g/㎤] and the dielectric constant, Q.f$_{0}$ and $\tau$$_{r}$ were 26, 80, 300[GHz] and +1.5[ppm/$^{\circ}C$] respectively in the microwave range.e.e.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.646-649
• /
• 2002

The microwave dielectric properties and the structure of $Sb_2O_5$ modified $BiNb_xSb_{1-x}O_4$ ceramics were investigated. The structure of these ceramics were orthohombic phase at all sintering temperatures and there were not the second phase. These ceramics added sintering additive such as CuO and $V_2O_5$ were sinterable at a low temperature$(880^{\circ}C{\sim}960^{\circ}C)$ by liquid phase. Dielectric properties of $BiNb_xSb_{1-x}O_4$ ceramics were also improved than these of $BiNbO_4$ ceramics. The content of modified atom controlled the microstructure, dielectric constant and quality factor. As a result, We could obtain following result; ${\varepsilon}r$=42~44, $Q{\cdot}f_0$=20,000~42,000GHz, $\tau_f=-7{\sim}-28ppm/^{\circ}C$.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.9
• /
• pp.459-463
• /
• 2004

In this study, the (l-x)$TiTe_3O_{8}$-x$MgTiO_3$ ceramics were investigated to obtain the improved dielectric properties of a high temperature stability and a sintering temperature of less than $900^{\circ}C$ which was necessary for the LTCC. According to the X-ray diffraction patterns of the (l-x)$TiTe_3O_{8}$-x$MgTiO_3$(x=0∼1) ceramics, the columbite structure of $TiTe_3O_{8}$ and ilmenite structure of $MgTiO_3$ were coexisted. Increasing the $MgTiO_3$ mole ratio(x), the density and dielectric constant were decreased and temperature coefficient of resonant frequency was moved to the negative direction and the quality factor was increased. In the case of the 0.6$TiTe_3O_{8}$-0.4$MgTiO_3$ ceramics sintered at $830^{\circ}C$ for 3hr., the microwave dielectric properties were $\varepsilon_{\gamma}$=29.3, Q${\times}$$f_{\gamma}$=39.600GHz and $\tau$$_{f}$=+9.3ppm/$^{\circ}C$.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1719-1723
• /
• 2014

In this study, the microwave dielectric properties of nano spheroidization glass powders added $Ba(Zn_{1/3}Ta_{2/3})O_3$ ceramics prepared by solid state reaction have been investigated. Adding $(Ba_{0.4}Ca_{0.6})SiO_3$ nano spheroidization glass powders could effectively promote the densification even in the case of decreasing the sintering temperature. When the glass frit is 0.3 wt% and sintering is carried out at a temperature of $1500^{\circ}C$ for 6 hr, a temperature stable microwave dielectric ceramic could be obtained, which has a dielectric constant (${\varepsilon}_r$) of 30.2, a quality factor ($Q{\times}f_0$) of 124,000 GHz and a temperature coefficient of resonance frequency (${\tau}_f$) of $2ppm/^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.843-846
• /
• 2000

The (1-x)MgTiO$_3$-xSrTiO$_3$(x=0.02∼0.08) ceramics were fabricated by conventional mixed oxide method. The sintering temperature and time were 1250$^{\circ}C$∼1400$^{\circ}C$, 2hr., respectively. The structural and microwave dielectric properties were investigated by varying sintering temperature and composition ratio. In the (1-x)MgTiO$_3$-xSrTiO$_3$(x=0.02) ceramics, the cubic SrTiO$_3$and hexagonal MgTiO$_3$phases were coexisted. The dielectric constant was increased and the temperature coefficient of resonant frequency( $\tau_f$) was decreased with addition of SrTiO$_3$. The temperature coefficient of resonant frequency($\tau_f$) was gradually varied from negative value to positive value with increasing the SrTiO$_3$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.279-282
• /
• 2003

For the millimeter-wave dielectrics, Forsterite-based ceramics were produced. Pure forsterite ceramics($Mg_2SiO_4$) shows porous micro-structure and very low Q*f values, which is not suitable for the dielectrics for the millimeter-wave band. Several sintering aids including $Al_2O_3$, $Li_2CO_3$, $Li_2SiO_4$, were added to the forsterite ceramics in order to produce dense low-loss dielectrics. Among these additives, $Li_2CO_3$ is the most effective sintering aids. Several sub-components including NiO, ZnO, $SnO_2$, $TiO_2$, were added to enhance the microwave dielectric properties. $TiO_2$ is the most effective additive to enhance the dielectric properties at microwave bands. The simultaneous addition of $TiO_2$ and $Li_2CO_3$ increases Q*f value over 170,000, which can be used as dielectrics in millimeter-wave bands.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.5
• /
• pp.337-341
• /
• 2021

Phase evolution, thermal and microwave dielectric properties of cordierite-Al₂O₃ composite were investigated. As the content of Al₂O₃ increased, mullite, sapphirine, and spinel were formed as secondary phases, implying that cordierite may be decomposed by the reaction with Al₂O₃. All sintered specimens exhibited dense microstructures. The densification occurred through liquid phase sintering. As the content of Al₂O₃ increased, the thermal expansion coefficient and the dielectric constant increased, whereas the quality factor decreased. The thermal expansion coefficient, the dielectric constant, and the quality factor of the 90 wt% cordierite 10 wt% Al₂O₃ composite sintered at 1,425℃ were 2.9×10^-6 K^-1, 5.1, and 34,844 GHz, respectively.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.101-103
• /
• 2003

The $ZnNb_2O_6$ ceramics with 5wt% CuO and $B_2O_3$(1,3,5wt%) were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of $950^{\circ}C{\sim}1025^{\circ}C$ for 3hr. in air. The structural properties were investigated with sintering temperature and $B_2O_3$ addition by XRD and SEM. Also, the microwave dielectric properties were investigated with sintering temperature and $B_2O_3$ addition. Increasing the sintering temperature, the peak of second phase ($Cu_3Nb_2O_6$) was increased. But no significant difference was observed as the $B_2O_3$ addition, In the $ZnNb_2O_6$ ceramics with 5wt% CuO and 5wt% $B_2O_3$ sintered at $975^{\circ}C$ for 3hr, the dielectric constant, quality factor, temperature coefficient of the resonant frequency were 19.30, 14,662GHz, $+4.18ppm/^{\circ}C$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.31 no.12
• /
• pp.1561-1569
• /
• 1994

Effect of calcining temperature on the sintering behaviors and microwave dielectric properties of BMT[Ba(Mg1/3Ta2/3)O3] ceramics was studied. The calcining temperatures were varied from 80$0^{\circ}C$ to 130$0^{\circ}C$, respectively. It was found that, as calcining temperature lowered below 125$0^{\circ}C$, second phase such as Ba5Ta4O15 phases started to appear in calcined powder with unreacted powders. After sintering, exaggerately grown Ba5TaO3 phase could be found amang the uniform BMT grains in sintered body. Basis on the infiltration experiment, Ba0.05TaO3 phase should be formed by reaction of BMT grain and BaO-MgO eutectic liquid. But increase of calcining temperature above 125$0^{\circ}C$, there was not any second phase or unreated component in calcined powder and sintered body. As result, low calcining temperature led to precipitation of second phase in specimen and resulted decrease of Q value of BMT ceramics.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.3
• /
• pp.110-114
• /
• 2001

$0.7Ba(Mg{\frac}_{1}{3}Ta{\frac}_{1}{3})O_3-0.3Ba({\frac}_{1}{3}Nb{\frac}_{1}{3})O_3ceramics$ were prepared by the conventional mixed oxide method. The ceramics were sintered at the temperature of $1500{\sim}1575[^{\circ}C]$ for 5 hours in air. The microwave dielectric properties of the specimens were investigated with sintering temperature. The 0.7BMT-0.3BCN ceramics showed typical XRD patterns of the complex perovskite structure. Dielectric constant and quality factor were increased with increasing the sintering temperature. In the case of the specimens sintered at $1575[^{\circ}C]$ for 5 hours, dielectric constant, quality factor and temperature coefficient of resonant frequency were good values of 28,23545 at 10[㎓] and -1.2 $[ppm/^{\circ}C]$, respectively.