• 한국식품저장유통학회지
• /
• 제13권3호
• /
• pp.344-350
• /
• 2006

혼합곡의 식미를 높이고 쌀과 함께 취반이 용이하게 하고자 찹쌀, 현미, 현미찹쌀, 찰보리, 서리태, 흑태, 팥 7가지 곡류와 두류를 대상으로 침지와 건조 전처리 조건을 검토하였다. 각 곡류와 두류의 수분흡수량은 서리태와 흑태가 가장 높게 나타났고, 보리, 찹쌀, 멥쌀, 현미찹쌀, 현미, 팥 순서를 보였다. 침지온도별 수분흡수량은 온도가 높을수록 수분흡수량이 증가하였고 수분흡수평형에 도달하는 시간이 단축되었다. 두류의 분쇄별 수분흡수량은 분쇄가 많이 될 수록 수분흡수량이 증가하였고 수분흡수평형에 도달하는 시간이 단축되었다. 침지한 시료를 실온, 열풍 $30^{\circ}C,\;50^{\circ}C$와 마이크로파 300 W, 700 W, 1000 W 출력으로 건조하였다. 그 결과 마이크로파 700 W 건조가 실온과 열풍, 마이크로파 300W에 비하여 시료의 손상없이 가장 단시간 내에 건조할 수 있었다. 따라서 혼합곡의 전처리 조건은 $30^{\circ}C$에서 1시간 침지한 후 마이크로파 700W에서 건조하는 것이 가장 적합한 것으로 사료되었다.

• 한국식품조리과학회지
• /
• 제14권1호
• /
• pp.44-49
• /
• 1998

Microwave oven을 이용한 취반 시 최적 취반조건을 설정하기 위하여 전자렌지의 출력 및 가열시간을 달리하여 취반한 밥의 관능적 특성을 조사하였다. 쌀 1cup(약 173 g)을 수세하여 290 ml 물을 넣고 1시간동안 침지시킨 후 전자렌지의 출력과 가열시간을 5단계로 조절하면서 취반하였다(1단계; 온도상승기, 2단계: 수분흡수기1, 3단계: 수분흡수기2, 4단계: 열 침투기, 5단계: 호화완료기). 예비실험에서 설정한 출력과 가열시간에 따른 실험조건 수는 1200treatments였으나 1차, 2차에 걸친 취반실험 결과로부터 32가지의 최적 취반조건을 선정하였다. 그 중에서 다시 다음 3가지를 전자렌지의 대표적 인 취반조건으로 제시할 수 있었다. 1) 출력(7) 5:00-출력(1) 5:00(2) 5:00-출력(2) 6:00-출력(7) 4:00 2) 출력(8) 4:25-출력(1) 5:00-출력(2) 5:00-출력(2)

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.229.2-229.2
• /
• 2008

• 전기학회논문지
• /
• 제58권6호
• /
• pp.1174-1179
• /
• 2009

In this paper we develop the characteristic of density on non-uniform plasma in different layer of the semiconductor with optically controlled microwave pulses. The transient response of the microwave pulses in different plasma layer has been evaluated by calculating the variation of the reflection function of dielectric microstrip lines. The lines has used under open-ended termination containing optically induced plasma region, which has illuminated a laser source. The characteristics impedances resulting from the presence of plasma are evaluated by the transmission line model. The analyzes the variation of transient response in a 0.01cm layer near the surface for frequency range from 1GHz to 128GHz. The diffusion length LD is larger than compared to the absorption depth $l/_{\alpha}l$. The variation of characteristic response in plasma layer with microwave pulses which has in deferentially localized has been evaluated analytically.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1355-1357
• /
• 1997

In this study, the ferrite/rubber composite microwave absorbers mixed Ni-Zn ferrite and $Ni_2Y$ ferroxplana were prepared in order to control matching condion. The variation of the material constants($\dot{\varepsilon}$, $\dot{\mu}$) and microwave absorbing characteristics were investigated with various ferrite mixing ratio. The material constants of ferrite/rubber composite microwave absorber could be controlled by variation ferrite mixing radio. The matching frequency and thickness could be controlled with various ferrite mixing ratio.

• 한국항해학회지
• /
• 제16권4호
• /
• pp.25-34
• /
• 1992

As a method of measure the absorbing characteristics of microwave absorber, the various microwave measuring method can be used fundamentally. There is, however, a big problem in measuring errors, since the wavelength of microwave such as used for radar is very short. Therefore, this research aimed to design and fabricate a converting adaptor of $20mm^{\phi}$ coaxial tube from a Type-N connector to $20mm^{\phi}$ coaxial tube and to use it for evaluating absorption characteristics of microwave absorber. Furthermore, the measurements of absorbing characteristics and material constants have been performed and review, which were carried out by using the coaxial tube and by using rectangular waveguide, respective. As a result, the validity of the proposed measuring method has been confirmed.

• Journal of Multimedia Information System
• /
• 제6권3호
• /
• pp.155-164
• /
• 2019

We intended to confirm that microwave attenuation by tree leaves is strongly linked to water content in leaves. We sampled natural broadleaves, including Japanese cinnamon, and investigated their effects on the microwave (3 to 20 GHz) frequency characteristics using a network analyzer. Experiments determined that microwave attenuation by foliage increases as a linear function of frequency per unit weight (gram). As the frequency increases, the spatial resolution increases, but the phase difference (imaginary component) increases. So we solved the dispersion of phase difference by sweeping the frequency and taking the intermediate value. Based on these experimental results, we developed a microwave scanner on 10Ghz to describe foliage moisture as a image and to enable assessments of leaf condition. Photosynthesis is the process whereby plants synthesize oxygen and sugars from carbon dioxide and water, thereby converting light energy into chemical energy. Since water is a major parameter of photosynthesis, the quantity of water accumulated inside a leaf reflects leaf health. The equipment described here and related microwave technologies will help assess the capacity of leaves to absorb atmospheric carbon dioxide.

• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.82-88
• /
• 2015

The magnetron, a vacuum tube, is currently the usual high-power microwave power source used for microwave heating. However, the oscillating frequency and output power are unstable and noisy due to the low quality of the high-voltage power supply and low Q of the oscillation circuit. A heating system with enhanced reliability and the capability for control of chemical reactions is desired, because microwave absorption efficiency differs greatly depending on the object being heated. Recent studies on microwave high-efficiency power amplifiers have used harmonic processing techniques, such as class-F and inverse class-F. The present study describes a high-efficiency 100 W GaN-HEMT amplifier that uses a harmonic processing technique that shapes the current and voltage waveforms to improve efficiency. The fabricated GaN power amplifier obtained an output power of 50.4 dBm, a drain efficiency of 72.9%, and a power added efficiency (PAE) of 64.0% at 2.45 GHz for continuous wave operation. A prototype microwave heating system was also developed using this GaN power amplifier. Microwaves totaling 400 W are fed from patch antennas mounted on the top and bottom of the microwave chamber. Preliminary heating experiments with this system have just been initiated.

• 한국연소학회지
• /
• 제21권2호
• /
• pp.22-28
• /
• 2016

High efficient and environment friendly combustion technologies are used to be operated an extreme condition, which results in unintended flame instability such as extinction and oscillation. The use of electromagnetic energy is one of methods to enhance the combustion stability and a microwave as electromagnetic wave is receiving increased attention recently because of its high performance and low-cost system. In this study, an experiment was performed with jet diffusion flames induced by microwave. Micro jet was introduced to simulate the high velocity of industrial combustor. The results show that micro jet flames had three different modes with increasing oxidizer velocity; attached yellow flame, lifted flame, and lifted partially premixed flame. As a microwave was induced to flames, the overall flame stability and blowout limit were extended with the higher microwave power. Especially the interaction between a flame and a microwave was shown clearly in the partially premixed flame, in which the lift-off height decreased and NOx emission measured in post flame region increased with increasing microwave power. It might be attributed to increase of reactivity due to the abundance of radical pool and the enhanced absorption to thermal energy.

• Composites Research
• /
• 제29권3호
• /
• pp.98-103
• /
• 2016

본 연구에서는 반도체 섬유 강화 복합재료를 이용하여 전자파 흡수 구조를 제작하였다. 두 종류의 반도체 섬유를 사용하여 복합재료를 제작하고, 자유공간 측정 장비를 이용하여 각각의 전자기적 물성을 측정하였다. 두께 최적화 방법으로 두 종류의 단층형 흡수 구조와 한 종류의 이층형 흡수 구조를 설계하였다. 설계한 전자파 흡수 구조를 반도체 섬유 강화 복합재료로 제작하고 그 흡수 성능을 측정하였다. 사용된 두 재료의 유전율은 Cole-Cole plot에 나타내었을 때 무반사 곡선에 가깝지 못하여 높은 흡수 성능을 기대하기 어려웠다. 두 종류의 재료로 제작한 단층형 흡수 구조는 10 GHz 근처에서 각각 -14.2 dB와 -8.8 dB의 흡수 성능을 보였다. 이러한 한계점을 보완할 수 있는 이층형 전자파 흡수 구조는 10 GHz 근처에서 -43.9 dB의 좋은 흡수 성능을 보였다. 반도체 섬유 강화 복합재료로 제작한 이층형 전자파 흡수 구조는 기존의 전자파 흡수 구조에 비해 간단한 제작 과정을 거쳐 좋은 흡수 성능을 갖는 흡수 구조를 얻을 수 있었으며, 상대적으로 더 적은 오차 요인을 갖고 있다.