• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.351-352
• /
• 2012

유도결합 플라즈마(ICP)가 결합된 마그네트론 스퍼터링법으로 수소와 알곤의 혼합비율에 따라 기판 가열 없이 유리기판 위에 실리콘 박막을 증착하였다. 수소 유량에 따른 실리콘 박막의 미세구조 변화는 XRD, Raman spectroscopy, FT-IR 등의 분석을 통해 확인하였다. 수소 유량이 증가할수록 박막의 증착률은 감소하였으며, 수소 혼합비율이 60% 이상일 때 비정질 실리콘이 미세결정질 실리콘으로 전이되는 것을 확인하였다.

• Korean Journal of Metals and Materials
• /
• v.47 no.6
• /
• pp.356-362
• /
• 2009

In order to vary the primary recrystallization textures, AA 1050 sheets were cold rolled in two different manners. Differences in cold rolling schedule gave rise to the formation of different cold rolling textures also leading to the formation of different primary recrystallization textures. Upon annealing for grain growth, changes in microstructure and texture hardly occurred in the sample depicting Cube recrystallization texture, while grain growth was accompanied with the development {001}<100> Cube texture in the sample displaying a recrystallization texture comprising of weak rolling texture components. The selective growth of Cube oriented grains is attributed to the high mobility of their grain boundaries.

• Korean Journal of Metals and Materials
• /
• v.50 no.3
• /
• pp.248-255
• /
• 2012

AlN thin films containing various amounts of Co, AlN-Co, and Al-Co alloy particles were prepared using a two-facing-target type dc reactive sputtering (TFTS) system. The as-deposited films exhibited the variable nature expected from an AlN-rich phase, and an amorphous-like phase, depending on the Co content in the films. Specific favorable microstructures were prepared by optimizing annealing conditions. Those microstructures and their magnetic properties and resistivity were investigated. As-deposited films showed very small saturation magnetization and an amorphous-like structure. However, when annealed, the as-deposited amorphous-like phase decomposes into phases of AlN, Co and Al-Co. These annealing induced changes in the microstructure improve the magnetization and resistivity of the films. Further improvement of soft magnetic properties could lead to the material being used for high density magnetic recording head material.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.456-460
• /
• 1995

Giant magnetoresistance(GMR) of $Cu_{85-x}Co_{15}Ni_{x}$ melt-spu ribbons is closely correlated with the microstructure produced by the spinodal decomposition. The solid solution range is extanded by the replacement of Cu by Ni in the as-quenched state. The wavelengths obtained by subsequent isothermal aging in Cu-Co-Ni ribbons are shorter than those in Cu-Co binary ribbons, resulting in the increase of the surface-to-volume ratio. The largest MR ratio of 8 % in high field has been achieved in the $Cu_{80}Co_{15}Ni_{5}$ aged ribbon. The field dependence of MR ratio in low fields becomes larger with the Ni content.

• Journal of Magnetics
• /
• v.18 no.1
• /
• pp.9-13
• /
• 2013

Shielding effects in conductive and magnetic materials were investigated as a function of properties, thickness and diameter. In this work, evaluations on passive conductive and magnetic shield specimens were achieved through experimentation set-up using 50 Hz single and three phase induction field sources. Analysis on material microstructure properties and characteristics of shielding specimens were performed with the use of vibrating sample magnetometer (VSM) and field emission scanning electron microscopy (FESEM). An induction field at $136{\mu}T$ of single phase system and $50{\mu}T$ of three phase systems were observed to the shield specimens with the thickness ranged of 0.2 mm to 0.4 mm. It is observed that shield specimen efficiency becomes inversely proportionate to the increment of induction fields. The decrease was attributed to the surface structure texture which relates to the crystallization and non-crystallization geometrical effects.

• Nuclear Engineering and Technology
• /
• v.37 no.4
• /
• pp.299-308
• /
• 2005

The behavior of fission gas in all major types of nuclear fuel has been reviewed with an emphasis on more recently discovered aspects. It is proposed that the behavior of fission gas can be classified in a number of characteristic types that occur at a high or low operating temperature, and/or at high or low fissile burnup. The crystal structure and microstructure of the various fuels are the determinant factors in the proposed classification scheme. Three types of behavior, characterized by anisotropic $\alpha$-U, high temperature metallic $\gamma$-U, and cubic ceramics, are well-known and have been extensively studied in the literature. Less widely known are two equally typical low temperature kinds: one associated with fission induced grain refinement and the other with fission induced amorphization. Grain refinement is seen in crystalline fuel irradiated to high burnup at low temperatures, whereas breakaway swelling is observed in amorphous fuel containing sufficient excess free-volume. Amorphous fuel, however, shows stable swelling if insufficient excess free-volume is available during irradiation.

• Journal of Ceramic Processing Research
• /
• v.19 no.6
• /
• pp.455-460
• /
• 2018

Chromium plating is a common surface treatment technique extensively applied in industry due its excellent properties which include substantial hardness, abrasion resistance, corrosion resistance, surface color, and luster. In this study, the effect of PTFE on corrosion behavior of Cr-P plating, low carbon steel substrates are electroplated in Cr(III) baths without and with PTFE. Trivalent chromium carbon plating was electroplated from trivalent chromium sulfate-based baths with different PTFE dispersion contents. The study focused on the microstructure, PTFE content, roughness, and corrosion resistance of the Cr-P-PTFE composite plating. Scanning electron microscopy and atomic force microscopy images showed a smoother plating and a decrease in the surface roughness of the electrodeposited. The results demonstrate that PTFE eliminates the cracks within plating by reducing internal stress. Therefore, the corrosion resistance of Cr-P-PTFE composite platings were better than that of Cr-P alloy platings.

• Journal of Surface Science and Engineering
• /
• v.53 no.6
• /
• pp.322-329
• /
• 2020

The utilization of aluminum scrap is a subject of great importance in terms of reducing energy consumption and environmental protection. However, aluminum scrap contains impurities, which can degrade the properties of aluminum alloy, especially corrosion resistance. This study examines the effect of scrap charge rate of aluminum alloys about microstructures and corrosion characteristics. According to the metallographic examinations, Mg2Si tended to become coarser and its uniformity was decreased by increasing aluminum scrap charge rate. The immersion test exhibited corrosion progressed through the eutectic areas due to micro-galvanic interactions. Electrochemical measurements revealed that excess aluminum scrap could reduce the intergranular corrosion resistance of aluminum alloys. Results showed that the scrap charge rate is important factor in the design of corrosion resistance of aluminum die casting alloys.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.87-90
• /
• 1998

ABSTRACT- we have analyzed the effect of microstructure and interface conditions on the anisotropic exchange filelds of NiO/NiFe bilayers. The NiO films were deposited by R.F. magentron sputtering. By using different atgon pressure NiO Films, Grain Size And Surface Roughness Of NiO can be manipulated. The exchange field is enhanced in the small granined NiO And This Increment Is Based On The Formation Of Small Domains In NiO

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.204-205
• /
• 2002

Co(P) 합금은 전기화학적으로 제조되는 강자성 재료 중 그 자기적 특성이 우수하여 이미 1960년대부터 연구가 진행되었으며$^{1)}$ 1980년대까지는 주로 무전해도금에 의해 제조되다가$^{2.3)}$ 1990년대 이후부터는 LIGA(Lithographie Galvanoformung Abformung) 공정이나 패터닝 공정과의 공정 통합의 용이성 때문에 전기도금방식이 주류를 이루고 있다.$^{4.5)}$ 그러나 전기도금에 의해 제조된 대부분의 Co(P) 합금은 P의 함량이 과다하여 비정질상태로 존재하며 추가적인 열처리 공정이 요구되고 자기적 성질도 좋지 못한 단점이 있었다. (중략)