• 한국분말재료학회지
• /
• 제8권1호
• /
• pp.42-49
• /
• 2001

Ti-50Ni(at%) and Ti-40Ni-10Cu(at%) alloy powders have been fabricated by ball milling method, and their microstructure and phase transformation behavior were investigated by means of scanning electron microscopy/energy dispersive spectrometry, differential scanning calorimetry (DSC), X-ray diffractions and transmission electron microscopy. In order to investigate the effect of ball milling conditions on transformation behavior, ball milling speed and time were varied. Ti-50Ni alloy powders fabricated with the milling speed more than 250 rpm were amorphous, while those done with the milling speed of 100rpm were crystalline. In contrast to Ti-50Ni alloy powders, Ti-40Ni-10Cu alloy powders were crystalline, irrespective of ball milling conditions. DSC peaks corresponding to martensitic transformation were almost discernable in alloy powders fabricated with the milling speed more than 250 rpm, while those were seen clearly in alloy powders fabricated with the milling speed of 100 rpm. This was attributed to the fact that a strain energy introduced during ball milling suppressed martensitic transformation.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.618-618
• /
• 2003

The purpose of this study was to evaluate the etching effects and bond strength of total etching and self-etching adhesive system on unground enamel using scanning electron microscopy and microtensile bond strength test. The buccal coronal unground enamel from human extracted molars were prepared using low-speed deamond saw. Scotchbond Multi-Purpose(group CM), Clearfil SE Bond(group SE), or Adper Prompt L-pop(group LP) were applied to the prepared teeth, and resin compasite(Z-250) was built up incrementally. Resin tag formation were evaluated by scanning electron microscopy, after removal of enamel surface by acid dissolution and dehydration.(중략)

• 대한금속재료학회지
• /
• 제50권6호
• /
• pp.445-448
• /
• 2012

We studied the effect of temperature and reaction time by investigating the various temperatures and reaction times in the reduction of molybdenum oxide ($MoO_3$) to molybdenum (Mo) powder in hydrogen gas. We also studied the effect of the reaction of reduction according to the various hydrogen gas flow rates. We surveyed the reduction from molybdenum oxide to molybdenum powder in hydrogen gas and checked two temperature ranges, one from $400^{\circ}C$ to $600^{\circ}C$ and the other from $700^{\circ}C$ to $900^{\circ}C$. We found that the reaction ratio of molybdenum oxide increased with an increasing temperature and also increased with an increasing reaction time, but hydrogen gas did not influence the reduction ratio of molybdenum oxide. We examined molybdenum powders fabricated by ball milling for two hours, using with X-ray diffraction (XRD) and a scanning electron microscopy (SEM).

• Entomological Research
• /
• 제48권6호
• /
• pp.466-479
• /
• 2018

Callosobruchus chinensis (Coleoptera: Bruchidae) is the main pest of mungbean (Vigna radiata) especially during seed storage. To provide background information for chemical ecology studies, we examined the externalmorphology of the antennal, maxillary palp and labial palp sensilla of this insect with scanning electron microscopy. The antennae of adult C. chinensis exhibited sexual dimorphism. The female have serrated antenna and the male have pectinate morphology. Eight sensillum types have been observed on the antennae of both sexes: $B\ddot{o}hm$ bristles, sensilla chaetica, sensilla trichodea, sensilla basiconica, sensilla styloconicum, sensilla coeloconica, sensillum campaniformia, sensilla cavity. There are no differences on the morphology of maxillary palp and labial palp between female and male. Four different types of sensilla are present on the labial and maxillary palps of both sexes of C. chinensis: sensilla chaetica, sensilla twig basiconica, sensilla basiconica, sensilla digitiformia.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1996년도 춘계학술대회
• /
• pp.119-130
• /
• 1996

We review the factors which regulate the depth and composition of the human airway surface liquid (ASL). These include secretion from airway submucosal glands, ion and fluid transport across the surface epithelium, goblet cell discharge, surface tension and transepithelial gradients in osmotic and hydrostatic pressure. We describe recent experiments in which we have used low temperature scanning electron microscopy of rapidly frozen specimens to detect changes in depth of ASL in response to submucosal gland stimulation. We also present preliminary data in which X-ray microanalysis of frozen specimens has been used to determine the elemental composition of ASL.

• 한국생산제조학회지
• /
• 제18권5호
• /
• pp.455-461
• /
• 2009

In a scanning electron microscopy, image distortion is a critical issue and it is needed to be eliminated by some kinds of schemes. In this work, scanning frequency and scanning wave form are adjusted to have an improved image. The relationship between scan coil and its driver is investigated and appropriate frequency and wave form are suggested. It is proved that the selected frequency and wave form showed an enhanced image with less distortion, which were done by experiments. In addition, a noise elimination is addressed, providing improved image with a GROUND signal integration with the amplifier and the scan driver.

• 한국환경과학회지
• /
• 제12권4호
• /
• pp.469-476
• /
• 2003

In order to examine the pre-treatment effect of crab shell en Pb$^{2+}$ removal by crab shell in aqueous solution, acid and alkali pre-treated crab shell were used. Electron microscopy techniques such as TEM (transmission electron microscopy) and SEM (scanning electron microscopy), and EDX (energy dispersive X-ray) and FTIR (Fourier transform infrared) spectrometry techniques were used to investigate the process of Pb$^{2+}$ removal by acid and alkali pre-treated crab shell. The Pb$^{2+}$ removal by acid pre-treated crab shell was much lower than that by untreated crab shell because of the decrease of CaCO$_3$ from the crab shell. However, the Pb$^{2+}$removal by alkali pre-treated crab shell increased compared to that by untreated crab shell. The results were confirmed by TEM, SEM, EDX and FTIR.nd FTIR.

• Journal of Microbiology and Biotechnology
• /
• 제23권9호
• /
• pp.1287-1292
• /
• 2013

Extracellular biogenic synthesis of silver nanoparticles with various shapes using the rice bacterial blight bacterium Xanthomonas oryzae pv. oryzae BXO8 is reported. The synthesized silver nanoparticles were characterized by UV-Vis spectroscopy, powder X-ray diffractometry (XRD), scanning electron microscopy, energy dispersive X-ray spectrometry, and high-resolution transmission electron microscopy (HR-TEM). Based on the evidence of HR-TEM, the synthesized particles were found to be spherical, with anisotropic structures such as triangles and rods, with an average size of 14.86 nm. The crystalline nature of silver nanoparticles was evident from the bright circular spots in the SAED pattern, clear lattice fringes in the high-resolution TEM images, and peaks in the XRD pattern. The FTIR spectrum showed that biomolecules containing amide and carboxylate groups are involved in the reduction and stabilization of the silver nanoparticles. Using such a biological method for the synthesis of silver nanoparticles is a simple, viable, cost-effective, and environmentally friendly process, which can be used in antimicrobial therapy.

• 한국진공학회지
• /
• 제11권4호
• /
• pp.256-260
• /
• 2002

Carbon nanotubes on metal(SUS304) substrates were synthesized by using micro-wave plasma-enhanced chemical vapor deposition at $650^{\circ}C$ with gas mixture CH$_4$(11%) and H$_2$(89%). Their structure was investigated by scanning electron microscopy and transmission electron microscopy. Raman spectroscopy was also used to justify the structure and crystallinity of graphite sheets. High-resolution transmission electron microscopy images clearly showed carbon nanotubes to be multwalled. The measured turn-on field and current density obtained from I-V measurement were 4.4 V/$\mu \textrm{m}$ and $8.4\times10^1\mu\textrm{A}/\textrm{cm}^2$, respectively.

• Applied Microscopy
• /
• 제27권4호
• /
• pp.473-481
• /
• 1997

Disorder-order transformation of nanocrystalline FeAl have been investigated by a combination of electron and X-ray diffraction analysis including high resolution electron microscopy and differential scanning calorimetry. Fe-50at.%Al powders mechanically alloyed for 90 hours consist of $5\sim10$ nm size grains haying either disordered b.c.c. structure or amorphous structure. X-ray and electron diffraction of mechanically alloyed FeAl powders show that disorder-order transformation occurs at the temperature range of $300^{\circ}C\sim320^{\circ}C$. Such a low-temperature ordering behavior exhibiting an exothermic reaction is attributable to the nm-scale grain structure with a large amount of defects accumulated during mechanical alloying process.