• Food Science of Animal Resources
• /
• v.35 no.3
• /
• pp.315-321
• /
• 2015

The aim of the present work was to investigate the effect of NaCl concentration on the emulsifying and rheological properties of porcine myofibrillar protein (MF)-stabilized soybean oil and fish oil emulsion (SO-EMs and FO-EMs). Emulsions (EMs) were prepared from 1% MF with 10% SO or FO at various NaCl concentration (0-0.5 M). The emulsifying ability index (EAI) of the EMs increased with increasing NaCl concentration for both oil types. Conversely, increasing NaCl manifested decrease in the emulsion stability index (ESI). In addition, creaming index (CI) also increased with NaCl concentration. From the microscopic observation, droplets of the EMs were more aggregated at relatively higher NaCl concentrations, especially for FO-EMs. All EMs had a gel-like structure owing to G' > G" from the rheological analysis. Comparing the oil types, the emulsifying capacity of SO-EMs was more stable than that of FO-EMs at all NaCl concentrations as determined from the CI value and microscopic observation. Therefore, it can be concluded that SO-EMs and FO-EMs are more stable at relatively lower concentrations of NaCl. In addition, the dispersed stability of SO-EMs was better than that of FO-EMs at the same concentration of NaCl.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.1
• /
• pp.71-85
• /
• 1993

The purpose of the study was to investigate the effects of the single and fractionated irradiation on the microvascular structure of the submandibular gland in rats. For this study, 90 Sprague-Dawley strain rats were irradiated to their neck region with equal split doses of 9Gy for a 4 hours interval and 15Gy single dose by 6MV X-irradiation and sacrificed on the 1st, 3rd, 7th, 14th and 27th day after irradiation. The author observed histological changes at Hematoxylin and Eosin staining and PAS staining under a light microscope, and also observed distribution and structural changes of the microvasculature in rat submandibular gland using a scanning electron microscope by forming vascular resin casting. The results were as follows: 1. In the light microscopic examination, the microvasculature was slightly dilated and decreased in number on the 1st day after irradiation, and increase in number of microvasculature was observed on the 3rd day after irradiation. And then distribution of microvasculature was markedly increased on the 7th day after iradiation, but decreased on th 14th day after irradiation again. Such changes were greater in the single irradiated group than in the fractionated irradiated group. 2. The reaction to PAS staining on glandular cell was decreased on the 1st and the 3rd day after irradiation, and recovered on the 7th day after irradiation. The reaction was decreased on the 14th day after irradiation again, and recovered on the 28th day after irradiation. Changes were more apparent in the single irradiated group. 3. In the scanning electron microscopic examination, early changes of microvasculature were decreased capillary density, dilation of conduits and meandering. Increased capillary dentsity or anastomosis due to vascular reproduction and smooth curved running were observed on the 7th and 14th day after irradiation. Decreased capillary and smooth running tendency were observed on the 28th day after irradiation again. Such changes were greater in the single irradiated group than in the fractionated irradiated group.

• Composites Research
• /
• v.17 no.3
• /
• pp.1-7
• /
• 2004

In the vacuum assisted RTM (VARTM) process that has become the center of attention for manufacturing massive composite structures, a good evacuation of air in the fiber preform is recognized as the prime factor. The microvoids, or the dry spots, are formed as a result of improper gate/vent locations and the mold geometry. The non-uniform resin velocity at the flow front leads to the formation of microvoids in the fibers, whereas the air in the microvoids can migrate along with the resin flow during mold filling. The residual air in the internal voids of a composite structure may cause a degradation of the mechanical properties as well as the structural failure. In this study, a unified macro- and micro analysis methods were developed to investigate the formation and transport of air in resin during VARTM process. A numerical simulation program was developed to analyze the three-dimensional flow pattern as well as the macro- and microscopic distribution of air in a composite part fabricated by VARTM process.

• The Journal of the Korean Society for Microbiology
• /
• v.10 no.1
• /
• pp.39-58
• /
• 1975

These studies were carried out to detect the presence of mycotoxin producing fungi in various kind of grains and foodstuffs in Korea. The experiments were divided into three parts: bacteriologic, toxicologic and electron microscopic studies. The results were summarized as follows: 1. From the 133 various samples, 426 colonies of fungi were isolated. In 405 of 426 colonies, it was possible to identify 17 genera. Among the identified strains, the predominant genera were Penicillium, Aspergillus and Alternaria. 2. In cytotoxicity test, 20 strains showed mild to severe toxic effects in mice and 24 strains showed toxic effects on HeLa cells among the 107 strains of experiments. 3. In electron microscopic studies of liver cells from animal which had been treated with toxin like substances, the liver cells showed the cytoplasmic changes: dilatation of endoplasmic reticulum, swelling of mitochondria, disappearance of mitochondrial cristae, increased number of lipid and glycogen particles. Nucleus and nuclear envelope alterations were also noted. 4. In fine structure of HeLa cells treated with culture filtrates of mycotoxin producing fungi and experimental strains had been noted a certain specific changes induced by culture filtrates. These alterations showed the disappearance of golgi complex, endoplasmic reticulum vacuolization and mitochondrial changes. 5. As a mass screening, the cytotoxicity tests of HeLa cells and histopathologic study of mice liver cells treated with toxin-like substances, employed are feasible to detect mycotoxin producing fungi.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.83-94
• /
• 2003

Many cities, recently, have convertedoptimized fixed-time control to adaptive traffic system in the control of their signalized traffic network. The expected benefit from the adaptive traffic system is its ability to constantly modify signal timing to most effectively accommodate changed traffic conditions. While the potential benefits from this control structure may be significant, few studies have compared the effect of implementing this method of signal control against other alternative signal control strategies, because it is too difficult to evaluate the efficiency of the real-time adaptive system. The objectives of this research are : to develop a microscopic simulator and to compare the effect at isolated intersections, corridors, and networks between the fixed signal timing plan and adaptive traffic signal system. This simulator will have allowed more sophisticated analysis techniques for the study of traffic control. Also, this research using this simulator evaluated a real-time traffic responsive signal system used in Seoul Korea

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.3
• /
• pp.201-208
• /
• 2015

Organogels are semi-solid systems that consist of an apolar solvent as the liquid phase within a three-dimensional networked structure. In this study, we developed a stable and skin penetration-enhanced Lecithin Organogel (LO) containing genistein, which is one of the poorly soluble active ingredients in both polar and apolar phase. After screening of various components (type of gelators, organic and aqueous phase), hydrogenated lecithin (HL), sunflower oil (SO), dipropylene glycol (DPG), and polyethylene glycol (PEG) were mainly used in this formulation. Phase ternary diagram was employed for optimization of the composition in the LO. The formulated LO were evaluated for its organoleptic characteristics, stability, pH, rheology, phase transition temperatures, microscopic analysis and skin penetration. The optimized stable LO system can be utilized as an effective and stable cosmetic formulation that can carry poorly soluble active ingredients at high concentration for topical dermal delivery.

• Journal of the East Asian Society of Dietary Life
• /
• v.14 no.5
• /
• pp.487-494
• /
• 2004

The effect of water extracts of Chungkukjang(WEC: 10%, w/v), which was prepared using Bacillus subtilis isolated from Korean traditional Chungkukjang, on the pH, acidity and volume of the dough, and loaf volume index(LVI), color, texture, retrogradation degree, microscopic observation and sensory quality of the bread were investigated. Experimental plots were divided to 3 groups(Control; without WEC, I; added 2.5% WEC against total amount of water, II; added 5.0% WEC against total amount of water). There were no significant difference in pH and acidity among each experimental groups. Dough volume were higher but LVI were lower in the 1- and II-bread than those of control group. L* values of the top crust and internal tissue in the I- and II-bread were lower than those of control group. The higher addition amounts had the lower L* values. Hardness, strength, gumminess and brittleness were higher, but cohesiveness and springiness were lower in the WEC-breads than those of control. In the results of microscopic observation, there were scarce of the bigger starch granules and a sparse structure, while there were smaller starch granules in the WEC-bread. The scores of crispy taste of the WEC-bread were lower than those of the control group, but there were no significant difference in tenderness, odor, savory taste and overall acceptability between the control and the I-bread. The retrogradation rate of the bread stored for 3 days at 25℃ was 45.09% in control, 17.92% in I-bread, and 12.45% in II-bread, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.644-647
• /
• 2001

The investigations were discussed on the radiation effects of the electrical properties to the p-type MOS capacitors, which were irradiated by cobalt-60 gamma ray sources. The characteristics of capacitance-bias voltage(C-V) and of dielectric dissipation tarter-bias voltage(D-V) on the capacitors were measured at 1 [MHz] frequency. The microscopic behaviors of spate charges in oxide and silicon-silicon dioxide(Si- $SiO_2$) interface were investigated from the experimental data. The C-V characteristics are statical and convenient for the evaluation of the steady state behavior of carriers and interface states characteristics. While, the distribution and magnitude of space charges in oxide can be found out accurately on the $V_{dp}$ in D-V curves. The density of interface states can be deduced with ease from the magnitude of D-peak at depletion state. Thus, it is also concluded that the D-V curves are more useful and easier than conventional C-V curves for analysis of the microscopic and dynamic behavior of carriers in oxide and Si- $SiO_2$interface.

• Biomolecules & Therapeutics
• /
• v.28 no.2
• /
• pp.145-151
• /
• 2020

Alzheimer's disease (AD) is a devastating neurodegenerative disease and a major cause of dementia in elderly individuals worldwide. Increased deposition of insoluble amyloid β (Aβ) fibrils in the brain is thought be a key neuropathological hallmark of AD. Many recent studies show that natural products such as polyphenolic flavonoids inhibit the formation of insoluble Aβ fibrils and/or destabilize β-sheet-rich Aβ fibrils to form non-cytotoxic aggregates. In the present study, we explored the structure-activity relationship of naturally-occurring biflavonoids on Aβ amyloidogenesis utilizing an in vitro thioflavin T assay with Aβ1-42 peptide which is prone to aggregate more rapidly to fibrils than Aβ1-40 peptide. Among the biflavonoids we tested, we found amentoflavone revealed the most potent effects on inhibiting Aβ1-42 fibrillization (IC₅₀: 0.26 µM), as well as on disassembling preformed Aβ1-42 fibrils (EC₅₀: 0.59 µM). Our structure-activity relationship study suggests that the hydroxyl groups of biflavonoid compounds play an essential role in their molecular interaction with the dynamic process of Aβ1-42 fibrillization. Our atomic force microscopic imaging analysis demonstrates that amentoflavone directly disrupts the fibrillar structure of preformed Aβ1-42 fibrils, resulting in conversion of those fibrils to amorphous Aβ1-42 aggregates. These results indicate that amentoflavone affords the most potent anti-amyloidogenic effects on both inhibition of Aβ1-42 fibrillization and disaggregation of preformed mature Aβ1-42 fibrils.

• Korean Journal of Materials Research
• /
• v.21 no.1
• /
• pp.21-27
• /
• 2011

A nano-porous structure of tin oxide was prepared using an anodic oxidation process and the sample's electrochemical properties were evaluated for application as an anode in a rechargeable lithium battery. Microscopic images of the as-anodized sample indicated that it has a nano-porous structure with an average pore size of several tens of nanometers and a pore wall size of about 10 nanometers; the structural/compositional analyses proved that it is amorphous stannous oxide (SnO). The powder form of the as-anodized specimen was satisfactorily lithiated and delithiated as the anode in a lithium battery. Furthermore, it showed high initial reversible capacity and superior rate performance when compared to previous fabrication attempts. Its excellent electrode performance is probably due to the effective alleviation of strain arising from a cycling-induced large volume change and the short diffusion length of lithium through the nano-structured sample. To further enhance the rate performance, the attempt was made to create porous tin oxide film on copper substrate by anodizing the electrodeposited tin. Nevertheless, the full anodization of tin film on a copper substrate led to the mechanical disintegration of the anodic tin oxide, due most likely to the vigorous gas evolution and the surface oxidation of copper substrate. The adhesion of anodic tin oxide to the substrate, together with the initial reversibility and cycling stability, needs to be further improved for its application to high-power electrode materials in lithium batteries.