• Journal of the Korean housing association
• /
• v.18 no.1
• /
• pp.19-26
• /
• 2007

The purpose of this study was to fine the changes in lavatory/bathroom and daily lives to clarify the modernization process of the housing through everyday affairs and adjustment behaviors after the period of opening the port with microscopic perspectives. For the purpose, reviews were focused on hygiene and cleanliness in lavatory/bathroom and the changes in such areas. Secondly, how the process of conflict and settlement due to such changes had been approached since modernization was studied. Research method used were literature review and field study. The results of the study were as the follows: From the perspective of 'hygiene' and 'cleanliness', which were the main characteristics of modernization, the lavatory/bathroom culture in traditional Korean housing might be considered very unsanitary and despicable. The actual problems encountered by the inhabitants, however, might be less significant than those discovered by the pioneers at that time. Despite such reality, housing adjustments through renovations of the bathrooms and lavatories by some classes implied the need for housing, which had been inhibited in themselves. Also it was found that the family conflicts due to cultural and life style differences existed in each time period.

• Advanced Composite Materials
• /
• v.17 no.4
• /
• pp.373-407
• /
• 2008

This paper will examine the possibilities of the virtual tests of composite structures by simulating mechanical behaviors by using supercomputing technologies, which have now become easily available and powerful but relatively inexpensive. We will describe mainly the applications of large-scale finite element analysis using the direct numerical simulation (DNS), which describes composite material properties considering individual constituent properties. DNS approach is based on the full microscopic concepts, which can provide detailed information about the local interaction between the constituents and micro-failure mechanisms by separate modeling of each constituent. Various composite materials such as metal matrix composites (MMCs), active fiber composites (AFCs), boron/epoxy cross-ply laminates and 3-D orthogonal woven composites are selected as verification examples of DNS. The effective elastic moduli and impact structural characteristics of the composites are determined using the DNS models. These DNS models can also give the global and local information about deformations and influences of high local in-plane and interlaminar stresses induced by transverse impact loading at a microscopic level inside the materials. Furthermore, the multi-scale models based on DNS concepts considering microscopic and macroscopic structures simultaneously are also developed and a numerical low-velocity impact simulation is performed using these multi-scale DNS models. Through these various applications of DNS models, it can be shown that the DNS approach can provide insights of various structural behaviors of composite structures.

• The Journal of Korean Medicine
• /
• v.35 no.4
• /
• pp.83-97
• /
• 2014

Objectives: This study aimed for establishing the discriminative criteria for Aucklandiae Radix, Inulae Radix, Vladimiriae Radix and Aristolochiae Radix, which can be confused as 'Mokhyang', because of similar appearances and synonyms. Methods: Morphological characteristics of dried herbal medicines were compared by macroscopic observation. To examine microscopic features of 'Mokhyang', paraffin embedding and the staining by using Ju's method were conducted. Physicochemical experiments were performed using HPLC analysis and antioxidant assay. Results: The types of stem, phyllotaxy and leaf shape were chosen as macroscopic criteria and the size, oil spots, color and root top as well as phloem and central cylinder were compared using microscopic features. The HPLC results showed different amounts of costunolide and dehydrocostuslactone among Aucklandiae Radix, Inulae Radix and Vladimiriae Radix. However, Aristolochiae Radix only contained aristolochic acid. The antioxidant assays also showed that Vladimiriae Radix exhibited strongest antioxidant activity followed by Aucklandiae Radix, Inulae Radix and Aristolochiae Radix. Conclusions: These results demonstrate that macroscopic, microscopic and physicochemical methods would be useful tools for the discrimination of 4 kinds of 'Mokhyang'.

• Composites Research
• /
• v.12 no.6
• /
• pp.22-30
• /
• 1999

Since the surface diffusion processed $Nb_3Sn$ superconducting tape has the advantage of having large overall critical current density. it is used for the construction of open type MRI superconducting magnets. However one of the disadvantages of this tape is that $Nb_3Sn$ compound often exhibited multiple cracking due to its intrinsic brittleness when subjected to mechanical loading such as bending and winding during the fabrication process for superconducting coil. This will eventually cause the severe degradation of critical current density. Therefore it is important to understand the microscopic deformation behavior of this kind of superconducting tape under the mechanical loading.In this study, acoustic emission(AE) was used to clarify microscopic deformation behavior at room temperature for $Nb_3Sn$ superconducting tape which was strengthened and stabilized with copper. For this purpose, special attention was paid to AE characteristics including AE event, energy, and amplitude distribution which were associated with microscopic mechanism of deformation of $Nb_3Sn$ superconducting tape under tensile load.

• Ocean and Polar Research
• /
• v.32 no.3
• /
• pp.247-254
• /
• 2010

Single cell PCR analysis and light and scanning electron microscopic techniques were utilized to identify free living bivalve larvae in the coastal waters of Tae-an, on the west coast of Korea. Through DNA sequencing, venerid clam larvae were isolated and identified as Ruditapes philippinarum (99% similarity) and Meretrix lusoria (99%). Under microscopic observation, the D-veliger stage of R. philippinarum exhibited symmetrical shoulder angles and an elliptical ventral form. In contrast, M. lusoria displayed asymmetrical shoulder angles and a round ventral form in the umbonal stage. Size of the R. philippinarum larvae was $156{\pm}22{\mu}m$ in length, $126{\pm}12{\mu}m$ in height, $92{\pm}14{\mu}m$ in width with a length: height ratio of 1.23. Meretrix lusoria was $202{\pm}44{\mu}m$ in length, $161{\pm}35{\mu}m$ in height, $96{\pm}38{\mu}m$ in width with a length: height ratio of 1.25. Experimental results indicate that morphological and molecular characteristics provide evidence for the larval identification of these two venerid clam larvae species in nature.

• Journal of Periodontal and Implant Science
• /
• v.16 no.1
• /
• pp.92.1-92.1
• /
• 1986

• The Korean Journal of Malacology
• /
• v.11 no.1
• /
• pp.70-77
• /
• 1995

The purpose of this study is to determine the differences of the conchiolin layer, prismatic layer and nacreous layer deposited within the shell of the freshwater family Unionidae. shether they possess species-specific characteristics and differences of the microstructure of these layers, A Scanning electron microscopic obwervations were conducted on seven species. The results indicate that all species possess thin and homogeneous layers within the periostracum. The prismatic layers of these species were composed of ednsely packed prisms. The prismatic layers of the shell in six species were typical shape of prisms. especially Inio douglasiae and Lamprotual gottschei. But, in Unio douglasiae sinuolatus, it was irregular and oblique prism shape.The nacreous layer of weven unionids characterized by possession of three types by lamillae shape: thin and homogeneous on genus Anodonta(0.4 pm size of lamella), Unio(1.3pm) and Lamprotual (1.7pm), homogeneous in shape and irregular in size of lamillae in Lanceolaria(1.0 pm)and irregulat in shape and size in Solenaia(0.2-0.4 pm). The microstructure of the naceous layer may be useful as a taxonomic character at the generic level.

• Journal of Welding and Joining
• /
• v.10 no.1
• /
• pp.20-34
• /
• 1992

Characteristics of two correcting methods, a new Autogeneous GTAW heating (TIG) method and the conventional GMAW bead-on plate welding(MIG) method, for distorted aluminum fabrication structures were studied. As a result of microscopic study of Autogeneous GTAW heating and GMAW bead-on plate welding areas, porosities in weld metal and surface cracks in local heating zone were found. Through the mechanical tests, it was verified that porosities decrease tensile strength and surface of distortion, angular displacement and transeverse shrinkage were measures and compared. In order to investigate changes of material properties in heating area and cause of defects such thermal stresses were calculated by ADINA. Through the computations of transient thermal stresses and microscopic observation of fracture surface, thermal stress was found to be the cause of crack during Autogeneous GTAW heating.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.798-803
• /
• 2009

This paper proposes a grating scanner which is driven by a stack-type piezoelectric element. The mechanism of the grating scanner is based on flexure hinges. Using some constraints, the compliant mechanism is designed and then verified by Finite Element Analysis. The designed compliant mechanism is manufactured by wire electro-discharge machining, and then integrated with a stack-type piezoelectric element for actuation and a capacitance displacement sensor for measuring ultra-precision displacement. Experiments demonstrates the characteristics and the performances of the grating scanner using the terms of working range, resonance frequency, bandwidth and resolution. The grating scanner is applicable to a Moire interferometry for measuring 3-dimensional microscopic surface.

• Journal of the Korean Society of Costume
• /
• v.21
• /
• pp.87-99
• /
• 1993

The fiber morphologies of the textiles from the burials of the Seip group of Ohio Hopewell (ca. 100 B.C. to A.D. 500)mounds were examined using light and scanning electron microscopy. A theoretical model was proposed which delineates the rate of morphological change in fibers through time and the cultural activities which occur during the life of a textile element. The Seip textiles were categorized according to their visual and structural characteristics. The microscopic examination of the Seip textiles yielded the evidence of animal hair fibers and bast fibers. The animal hair fibers of the seip textiles were identified as the hair of rabbit or hare. The bast fibers of the Seip textiles exhibited variation in morphological features such as the degree of bundle separation and the presence of transverse striations, fibrillations, or trans-verse cracks.