• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.263-264
• /
• 2006

On this study the performance of engineering workstation running OpenGL based application The following instructions are enhanced by configuring of the microprocessor and main memories. Single processors and more main memories are better than dual and less or same is confirmed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3064-3066
• /
• 1999

The existing equipment with wire communication can expect the stability of data transmission. However, according to increasing a number of DTE (Data Terminal Equipment), wiring work becomes a heavy burden. Restriction to application about portable DTE and the lack of flexibility are another drawback of wire communication. This paper presents the design and implementation of a RF (Radio Frequency) based wireless communication system. The RF based module is designed to the multi communication between DTEs. The RF based module consists of RF circuit and microprocessor. The main properties of RF circuit are maximum 5Kbps transmission rate, maximum 90m transmission distance and 433MHz frequency band. The microprocessor rearrange the data into AHDLC(Advanced High level Data Link Control) format and then instructs RF circuits to transmit/receive the data. The RF module have a wide application field such as fire/security alarm, remote control/measurement etc..

• ETRI Journal
• /
• 제22권4호
• /
• pp.13-24
• /
• 2000

As more transistors are integrated onto bigger die, an on-chip multiprocessor will become a promising alternative to the superscalar microprocessor that dominates today's microprocessor marketplace. This paper describes key parts of a new on-chip multiprocessor, called Raptor, which is composed of four 2-way superscalar processor cores and one graphic co-processor. To obtain performance characteristics of Raptor, a program-driven simulator and its programming environment were developed. The simulation results showed that Raptor can exploit thread level parallelism effectively and offer a promising architecture for future on-chip multi-processor designs.

• 산업기술연구
• /
• 제22권A호
• /
• pp.89-94
• /
• 2002

In this paper, a Exhaust Flow Controller (EFC) technology for uniform application of film coater and developer device is introduced that spread and remove photo resister at semiconductor manufacturing process. Because developed EFC device uses differential pressure sensing method as a differential flow meter and embodied smart A/D conversion by using a one chip microprocessor and devised by feedback Servo control, It has shown excellent performance and stability evaluation, as maximum 2000L/min flow, capability of installation to actual semiconductor equipment.

• 한국의학물리학회지:의학물리
• /
• 제3권1호
• /
• pp.19-24
• /
• 1992

마이크로 프로세서를 이용하여 8채널 방식의 선량측정장치를 구성하여 방사선 치료시 환자의 부위별 선량측정 및 밀봉선원을 이용한 치료에서의 선량분포와 뇌정위적 방사선 수술에서의 선량 측정에 이용할 수 있도록 하였다. 본 연구에서는 방사선 검출소자에 상용 반도체도 이용할 수 있도록 하는데에도 목적을 두고 여러개의 검출소자의 신호를 실시간 계측이 가능토록 하였으며 개인용 컴퓨터의 RS-232C 직렬 포트를 이용하여 본 시스템의 모든 기능을 제어하고 데이타 처리를 하도록 하였다.

• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.517-524
• /
• 1998

This paper discusses the development of a reactive power controller using digital signal processing. Digital Signal Processing is the technique of using digital devices to Process continuous signals or data, often in real-time. And DSP algorithms are associated with a discrete time interval between input samples. When one designs a digital filter, one can use a Laplace transform to determine the continuous time frequency response. The corresponding discrete time transform is called Z transform and depends upon discrete samples of the input spaced equally in time. The objectives of this paper are to minimize real power losses and improve the power factor of a given system. Also, the implementation of a direct-form non recursive filter on the TMS320C31 has been described. The application of this microprocessor-based controller using DSP on test system reveals its numerous advantages. Performance and features of the controller for the reactive power control are analyzed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.33-35
• /
• 1995

Permanent magnet brushless motor is widely used in industrial drive applications due to high efficiency, high power ratio, and easy maintenance. Position and speed sensors required in this dolor increase the drive cost, and reduce the application range. Some papers present the sensorless speed control using DSP with a high processing performance. However, DSP increases the cost, and makes the implementation difficult. This study has performed the sensorless speed control with a microprocessor system which can be easily accessed.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.9-15
• /
• 1999

A digital CDI(Capacitive Discharge Ignition) system on small two stroke motorcycle engine was developed in this paper, This CDI system with microprocessor as its main part has more flexible spark timing than the conventional CDI system because of its programmable characteristics. The principle of this digital CDI system and the design methods of hardware and software were presented in this paper, Two stroke small engine was tested to investigate the performance of digital CDI system And also this system was investigated to optimize the engine performance. Also comparison between conventional CDI can provide better spark timing variation than the conventional system. The part and full load test results show that the engine power was increased about 10-20% and fuel consumption was decreased about 10-20% simultaneously. Furthermore, this digital CDI system has simple structure, low cost and very little modification are required. It is a promising technology to substitute for the widely used conventional CDI system.

• 한국염색가공학회지
• /
• 제12권4호
• /
• pp.233-238
• /
• 2000

In this study, the control system of sodium hydroxide was demonstrated to systemize hydrolysis process in polyester dyeing. We mainly focused on the application method of acid-alkali titration for the polyester hydrolysis machine of liquor-flow type. Industrial pH meter with electrode type was used for identifying equivalence point. Three units which were analogue-to-digital card, microprocessor and digital output card were used to control NaOH concentration in the control part of the system. The yielded data are translated to the microprocessor through analogue-digital interfacing card. After calculating, NaOH concentration in NaOH storage tank was controlled through the digital output card and solenoid valves.

• 한국컴퓨터정보학회논문지
• /
• 제22권5호
• /
• pp.11-19
• /
• 2017

In this paper, we propose a hypervisor for embedded systems based on ARM microprocessor. The proposed hypervisor makes it possible to run several real-time kernels concurrently on a single embedded system by virtualizing its microprocessor. With assistance of MMU, it supports virtual memory which enables each guest operating system has its own address space. Exploiting the fact that most embedded systems use memory-mapped I/O device, it provides a mechanism to distribute an external interrupt to virtual machines properly. It also achieves load balancing through live migration which moves a running virtual machine to other embedded system. Unlike other para-virtualization techniques, minor modifications are needed to run it on the hypervisor. Extensive performance measurement studies are conducted to show that the proposed hypervisor has enough potentiality of its real-world application.