• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.561-564
• /
• 2009

A cryptographic dongle, which is capable of transmitting encrypted voice signals over the CDMA/GSM voice channel, was designed and implemented. The dongle used PIC microcontroller for signals processing including analog to digital conversion and digital to analog conversion, encryption and communicating with the smart phone. A smart phone was used to provide power to the dongle as well as passing the encrypted speech to the smart phone which then transmits the signal to the network. A number of tests were conducted to check the efficiency of the dongle, the firmware programming, the encryption algorithms, and the secret key management system, the interface between the smart phone and the dongle and the noise level.

• Journal of Power Electronics
• /
• v.10 no.4
• /
• pp.444-449
• /
• 2010

The generation of electric power using self excited induction generation (SEIG) is a viable option in remote and rural areas where grid electricity is not available. The generated voltage and frequency of these machines, however, varies with varying loads. This characteristic can be resolved either by adjusting the values of the excitation capacitance or by controlling the prime mover speed. Further, in a single-point constant power application, where the machines deliver a fixed amount of power, the electronic load controller (ELC) can be used to switch-in or switch-out a dump load whenever the consumer load decreases or increases respectively. This paper presents a detailed analysis and the design of a microcontroller based SEIG -ELC system intended for stand-alone pico hydro power generation. The simulated performance of the controller is supplemented by experimental results.

• Journal of information and communication convergence engineering
• /
• v.4 no.1
• /
• pp.13-17
• /
• 2006

In this paper a design and implementation method of remote control system for automobile is presented. For this, we used the Bluetooth technology for remote and wireless communications and microcontroller for system control. By using these techniques, we can design and implement automobile remote control system to improve data error rate, security and application.

• Journal of information and communication convergence engineering
• /
• v.8 no.5
• /
• pp.528-533
• /
• 2010

This research is part of the development of Data Acquisition embedded system that specifically use in ship. The purpose of this data acquisition system mainly is to acquire data from multiple sensors or others related external devices and it will further discuss in this paper. The data collecting, hardware design, software design and the final project outcome of this data acquisition system will be discussed in this paper.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.317-320
• /
• 2002

Recently, AMBA(Advanced Microcontroller Bus Architecture) is used as common system bus at embedded system. In this paper, we described test method of peripheral device which is connected to AMBA according to the bus interface defined by AMBA protocol We implemented one of the APB(Advanced Peripheral Bus) peipheral module, GPIO(General Purpose Input/output), and tested its functionality as il is connected to the AMBA system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1480-1484
• /
• 2003

This paper presents the design and development of network for housing estate security system. The system can cover up to 961 houses which can be up to 1,200 meters long transfer rate of 9,600 bps. This system uses checking and warning the abnormal situation. More over this system has ability to control switch on/off the electrical equipment in the house via AC line control system. The system consists of 4 parts. The first part is a security system of each house using MCS-51 microcontroller as a central processing unit scan 32 sensors and control 8 appliances and send alarm. The MCS-51 microcontroller received control signal via telephone used DTMF circuit. The second part is distributed two levels master/slave network implementing after RS-485 serial communication standard. The protocol its base on the OSI (Open Systems Interconnection) 7 layers protocol model design focus on speed, reliability and security of data that is transferred. The network security using encrypt by DES algorithm, message sequence, time stamp checking and authentication system when user to access and when connect new device to this system. Flow control in system is Poll/Select and Stop-and-Wait method. The third part is central server that using microcomputer which its main function are storing event data into database and can check history event. The final part is internet system which users can access their own homes via the Internet. This web service is based on a combination of SOAP, HTTP and TCP/IP protocols. Messages are exchanged using XML format [6]. In order to save the number of IP address, the system uses 1 IP address for the whole village in which all homes and appliance in this village are addressed using internal identification numbers. This proposed system gives the data transfer accuracy over 99.8% and maximum polling time is 1,120 ms.

• Proceedings of the KOSOMBE Conference
• /
• v.1994 no.05
• /
• pp.53-56
• /
• 1994

We have developed biological signal measurement modules and data acquisition and control card for a biological signal measurement, archiving, and communication system (SiMACS). Biological signals included in this system are ECG, EEG, EMG, invasive blood pressure, respiration, and temperature. Parameters of each module can be controlled by PC-base IDPU (intelligent data processing unit) through a data acquisition and control card. The data acquisition and control card can collect up to 16 channels of biological signals with sampling rate of $50\;{\sim}\;2,000Hz$ and 12-bit resolution. All measurement moduls and data acquisition functions are controlled by microcontroller which receives commands from PC. All data transfers among PC, microcontroller, and ADC are done through a shared RAM access by polling method for real rime operation.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.4
• /
• pp.238-243
• /
• 2006

This paper presents novel ignition method for automotive 35W metal halide discharge lamp electronic ballast. At this study, the novel method of ignition is developed to reduce costs and size of the ballast. By use of the novel method, the voltage needed in ignition is decreased, which result in use of the lower voltage rating power devices compared with conventional method and product compactness was achieved by deleting a circuit generating negative voltage needed in ignition at an conventional circuit. In terms of luminosity, color rendering, light efficiency(lm/W) and lifespan, the metal halide lamp is superior to, but unlike halogen lamp, it have more complicated transient characteristics to reach its steady state than the conventional halogen lamp. Therefore, in this paper, the electronic ballast was designed such that the metal halide lamp could be optimized for the automotive, by applying a method of microcontroller-based digital control. The results of the proposed system is verified through various experiment results.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.75-78
• /
• 2002

Since power failures in high-speed communication network, especially in HFC(Hybrid Fiber Coaxial cable) network are critical, microcontroller-based UPS(Uninterrupted Power Supply) are commonly used in the network. Hardware and software of UPS management system is designed and implemented to monitor and control UPS status to supply electric power to ONU and TBA in the HFC network. The result of laboratory tests and field tess of this system shows the scan rate to be 1 to 10 minutes to sufficiently monitor the status of UPS in the network.

• Journal of Advanced Navigation Technology
• /
• v.12 no.2
• /
• pp.91-99
• /
• 2008

In this paper, we implemented an wireless remote control and monitoring system by using Globalstar satellite modem. This system is composed of the data terminal equipment of Globalstar data communication system using microcontroller, C8051F023, and WGIS(Web-based GIS) user program. We tested the wireless remote control and monitoring system with data terminal equipment and user program how to work properly, and verified that the user could confirm the data from the data terminal equipment, which can provide the status of input/output devices and the information of location with the main and control dialog by GIS(Geographic Information System) program. For data communication of between data terminal equipment and user program, we programed PPP and TCP/IP protocol to communicate with each other. Some GIS tools used in this program are ArcView and MapObject from ESRI to offer various visual mapping information to the user.