• 상하수도학회지
• /
• 제31권2호
• /
• pp.169-175
• /
• 2017

This study applied microbubbles to reduce membrane fouling in wastewater reuse membrane processes, evaluated and compared the transmembrane pressure with or without the application of microbubbles and the cleaning efficiency with the application of aeration and microbubbles. In addition, this study analyzed foulants removed from the membrane surface. Changes in the transmembrane pressure of membranes with the presence or absence of microbubbles were observed. As a result, transmembrane pressure (TMP) increasing rate decreased twofold when applying microbubbles to realize stable operations. This study compared and evaluated cleaning efficiency applying aeration and microbubbles. As a result, the cleaning efficiency was 5% higher on average when applying microbubbles. In turbidity and total organic carbon (TOC), foulants were discharged when applying microbubbles twice as much as applying aeration. It is thought that particulate foulants precipitated on the membrane surface were more likely to desorb because the adhesion between the membrane surface and particle was weakened by microbubbles. Therefore, it is considered possible to effectively control membrane fouling because of the increase in cleaning efficiency when applying microbubbles to wastewater reuse membrane processes.

• Nuclear Engineering and Technology
• /
• 제38권8호
• /
• pp.763-778
• /
• 2006

Injection of microbubbles within the turbulent boundary layer has been investigated for several years as a method to achieve drag reduction. However, the physical mechanism of this phenomenon is not yet fully understood. Experiments in a channel flow for single phase (water) and two phase (water and microbubbles) flows with various void fraction values are studied for a Reynolds number of 5128 based on the half height of the channel and bulk velocity. The state-of-the art Particle Tracking Velocimetry (PTV) measurement technique is used to measure the instantaneous full-field velocity components. Comparisons between turbulent statistical quantities with various values of local void fraction are presented to elucidate the influence of the microbubbles presence within the boundary layer. A decrease in the Reynolds stress distribution and turbulence production is obtained with the increase of microbubble concentration. The results obtained indicate a decorrelation of the streamwise and normal fluctuating velocities when microbubbles are injected within the boundary layer.

• 생물환경조절학회지
• /
• 제28권2호
• /
• pp.158-165
• /
• 2019

본 실험은 물냉이 수경재배 시 양액 내 발생 시킨 마이크로버블이 물냉이의 생육과 glucosinolate 축적에 미치는 영향을 알아보기 위해 수행되었다. 본엽 4매의 물냉이 유묘(파종 2주 후)를 마이크로 버블과 비-마이크로버블을 발생시킨 오오츠카 배양액을 이용하여 환경조절룸에서 3주간 재배하였다. 물냉이 초장은 대조구처리가 마이크로버블처리보다 41% 증가하였으며, 유의적으로 높게 나타났다. 그러나, 지상부 생체중과 건물중, 근장, 엽장, 엽폭, SPAD, 량자수율값은 두처리간 유의적 차이는 나타나지 않았다. Glucosinolate 함량을 분석 결과 4-methoxygluco-brassicin을 제외한 glucoiberin, glucobrassicin, gluconapin, gluconasturtiin의 경우 마이크로버블 처리구가 대조구보다 유의적으로 높게 나타났으며, 물냉이 한주 당 총 glucosinolate 함량은 마이크로버블 처리구가 대조구 보다 $85%({\mu}mol/g\;DW)$와 $65%({\mu}mol/plant)$ 더 높게 나타났다. 본 연구 결과는 담액재배시 양액 내 마이크로버블이 물냉이의 glucosinolate 함량을 증가시킬 수 있을 것으로 나타났다.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.46-53
• /
• 2016

Direct numerical simulation is conducted to observe the behavior of microbubbles in isotropic turbulence. Navier-Stokes equation and the motion of equation for microbubbles are solved with periodic boundary condition in a cube domain. Vorticity contour, enstrophy ratio, relative reduction of bubble rise velocity, and the closest distance of particles are investigated for various Stokes numbers and gravity factors to understand clustering of microbubbles. Also, clustering due to the effect of the lift force is investigated.

• 상하수도학회지
• /
• 제19권2호
• /
• pp.161-172
• /
• 2005

Recently, water treatment methods utilizing microbubbles such as DAF and EF are gaining interest and being studied. Current study is focused on the fundamental research of electroflotation by examining the characteristics of microbubbles and particles. The objects of this research consist of two things; (1) theoretical modeling of microbubble-particle collision, (2) the experimental investigation of removal efficiency of turbidity in electroflotation. From investigation, the mechanism of electroflotation can be explained not only by the characteristics of microbubbles and particles but also the chemistry of aluminum dissolved from aluminum electrode during the electroflotation experiment.

• 한국가시화정보학회지
• /
• 제4권2호
• /
• pp.69-75
• /
• 2006

The microbubbles were used in various fields, such as turbulent control, drag reduction, material science and life science. The X-ray PTV using X-ray micro-imaging technique was employed to mea-sure the size and velocity of micro-bubbles moving in an opaque tube simultaneously. Micro-bubbles of $10{\sim}60{\mu}m$ diameter moving upward in an opaque tube (${\phi}$=2.7mm) were tested. Due to the different refractive indices of water and air, phase contrast X-ray images clearly show the exact size and shape of over-lapped microbubbles. In all of the working fluids tested (deionized water, tap water, 0.01 and 0.10M NaCl solutions), the measured terminal velocity of the microbubbles rising through the solution was proportional to the square of the bubble diameter. The rising velocity was increased with increasing mole concentration. The microbubble can be useful as contrast agent or tracer in life science and biology. The X-ray PTV technique should be able to extract useful information on the behavior of various bio/microscale fluid flows that are not amenable to analysis using conventional methods.

• 유기물자원화
• /
• 제31권3호
• /
• pp.93-102
• /
• 2023

본 연구는 NOx, SOx를 동시 제거하는 방법에 추가로 대기 중에 존재하는 중금속 오염물질에 대해 처리가능한지를 스크러버에 산화제와 환원제를 마이크로버블 장치에 투입하여 2차 오염물질이 발생 되지 않는 친환경적인 처리방식을 연구하고자 하였다. 마이크로버블로 처리하고자 하는 대기 중 중금속 물질은 납화합물(Pb)을 선정하여 제거효율을 확인하였다. 마이크로버블을 스크러버에 연결하여 처리함으로써 NOx, SOx 뿐만 아니라 대기 중 중금속 물질 저감효과 및 비용 절감과 2차 환경오염물질이 발생 되지 않는 것을 확인하였다. 본 연구를 통하여 기존에 SCR과 같이 고비용의 처리방식이 아닌 친환경적인 방법을 적용하여 저비용으로 NOx, SOx, 중금속을 동시 제거가 가능하였으며, 산화제와 환원제 및 마이크로버블을 적절히 사용하면 경제적이고 효율적인 대기오염물질 처리가 가능하였으므로 환경방지시설의 기술 발전에 도움이 될 것으로 기대된다.

• 대한환경공학회지
• /
• 제37권10호
• /
• pp.558-562
• /
• 2015

마이크로버블과 촉매 그리고 산화제(공기)의 적용에 따라 6개의 서로 다른 조건으로 구분하여 가축분뇨의 슬러지 감량과 유기오염물질의 저감 효과를 알아보았다. 마이크로버블과 촉매, 그리고 산화제 모두 사용 하였을 때(조건1), 슬러지는 99% 이상 제거 되었으며, TCOD와 SCOD는 각각 58%와 13% 제거되었으며, 모든 조건에서 가장 높은 저감 효과를 나타냈다. 산화제를 공급하면서 마이크로버블(조건2)과 촉매(조건 4)를 사용하였을때, 슬러지 감량은 95%와 93.1%, TCOD의 감량은 53%와 47%로 나타났다. 산화제(공기)를 공급할 때는 마이크로버블의 저감효과가 촉매보다는 더 큰 것으로 나타났다. 마이크로버블과 촉매 반응은 산화제와 함께 반응 과정 중에 OH-라디칼이 생성되고, OH-라디칼의 강한 산화력에 의해 오염물질이 분해되는 것이다. 산화제와 함께 마이크로버블과 촉매에 의한 슬러지 감량 효과는 모두 93% 이상이었으며, TCOD의 감량은 47% 이상이었다.

• 대한조선학회논문집
• /
• 제52권4호
• /
• pp.356-363
• /
• 2015

Microbubbles moving in the turbulent boundary layer are visualized and investigated in the point of frictional drag reduction. The turbulent boundary layer is formed beneath the surface of the 2-D flat plate located in the tunnel test section. The microbubble generator produces mean bubble diameter of 30 – 50 μm. To capture the micro-bubbles passing through the tiny measurement area of 5.6 mm² to 200 mm², the shadowgraphy system is employed appropriately to illuminate bubbles. The velocity field of bubbles reveals that Reynolds stress is reduced in the boundary layer by microbubbles’ activity. To understand the contribution of microbubbles to the drag reduction rate more, much smaller field-of-view is required to visualize the bubble behaviors and to find the 2-D void fraction in the inner boundary layer.

• The Plant Pathology Journal
• /
• 제34권4호
• /
• pp.335-340
• /
• 2018

To investigate the difference in the disinfectant efficiency of ozone microbubbles ($O_3MB$) and ozone millibubbles ($O_3MMB$), the morphological change of the treated Fusarium oxysporum f. sp. melonis spores was observed with scanning and transmission electron microscopies (SEM and TEM). The disinfectant efficiency of $O_3MB$ on F. oxysporum f. sp. melonis spores was greater than that of $O_3MMB$. On observation with SEM, it was revealed that morphological change of F. oxysporum f. sp. melonis spores was caused by $O_3MB$ and $O_3MMB$, and damage to the spore surfaces by $O_3MB$ occurred sooner than that by $O_3MMB$. On observation with TEM, it was furthermore confirmed that F. oxysporum f. sp. melonis spores treated with $O_3MB$ induced wavy deformation of cell membrane and the intracellular change different from that with $O_3MMB$. Therefore, the greater disinfection efficiency of $O_3MB$ was suggested to be caused due to the function of the MB in addition to the oxidative power of $O_3$.