• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1327-1331
• /
• 1990

A new dual loop controller using color LCD bar graphs with LED back lights has been developed. An optional memory card is used to load or save the controller configuration, which may be a preprogrammed standard package or a user-programmed configuration, in addition to the built-in functions ready for user selection. The bar-graph display is selectable for single-loop or dual-loop use. A high grade of self-tuning functions using a modeling technique is built-in as standard. The controller can accommodate optional plug-in modules for thermocouples, communication, etc. All the options are fully field upgradable.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.141-149
• /
• 1998

Diamond shaping is one of the machining strategies to make the optical micro-groove molds, and it is especially useful when the component is an assembly of the linear micro-groove array. A mirrorlike surface and an arbitrary crose-sectional curve can be easily made by the diamond tool. However, the cutting speed of shaping is relatively lower than that of the other cutting methods, and there exist an unstable cutting conditions that generate the chatter. This study is focused on the modeling of the simplified self-induced chatter of the diamond shaping, and the machinabilities of three materials are compared by cutting experiments. From the chatter model and experiments, it is found that the unstable cutting conditions exist when the depth of cut is low and cutting speed is high. It is also found that the brass is relatively good material in micro shaping than copper or aluminium from the cutting experiments.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.115-121
• /
• 2005

Micromachines are extremely novel artifacts with a variety of special characteristics. Utilizing their tiny dimensions ranging roughly from 10 to $10^3$ micro-meters, the micromachines can perform tasks in a revolutionary manner that would be impossible for conventional artifacts. Micromachines are in general related to various coupled physical phenomena. They are required to be evaluated and designed considering the coupled phenomena. This paper describes finite element analysis (FEA) simulation of practical behaviors for the micro actuator. Especially, electric field modeling in micro actuators has been generally restricted to in-plane two-dimensional finite element analysis because of the complexity of the micro actuator geometry. However, in this paper, the actual three-dimensional geometry of the micro actuator is considered. The starting torque obtained from the in-plane two-dimensional analytical solutions were compared with that of the actual three-dimensional FE analysis results. The starting torque is proportional to $V^2$, and that the two-dimensional analytical solutions are larger than the three- dimensional FE ones. It is found that the evaluation of micro actuator has to be considered electrical leakage phenomenon.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.228-230
• /
• 2002

Recently, electric power reliability of our country has been improved. However, there are still remaining problems which are short-duration variations like instantaneous and momentary interruption and voltage sag by nature calamity ; typhoon, lightning, snow, etc. Besides, power quality ; harmonics, caused by using power electronics equipments, become a hot issue Malfunction of controller and stop machinery, and losing the important data are caused by poor power quality at a couple of second. Due to those, UPS, which is made up battery, has being used, but there are several disadvantages ; long charge and discharge time, environmental problem by acid and heavy metal, and short life time. As generally know, micro-SMES is a method to settle those mentioned. However, there need huge system apparatuses in order to verify the effect of system efficiency and stability considering the size of micro-SMES, the sort of converter type, and various conditions ; inner temperature, magnetic field, quench characteristic of micro-SMES, and etc. In this paper, in order to bring the mentioned above to a settlement, a micro-SMES is modeled with characteristics of micro-SMES is interfaced to EMTOC program using Fortran program interface method. We obtained hopeful answers and made the simulation model of micro SMES.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1045-1048
• /
• 2002

Micromachines are extremely novel artifacts with a variety of special characteristics. Utilizing their tiny dimensions ranging roughly from 10 to $1O^3$ micro-meters, the micromachines can perform tasks in a revolutionary manner that would be impossible for conventional artifacts. Micromachines are in general related to various coupled physical phenomena. They are required to be evaluated and designed considering the coupled phenomena. This paper describes finite element analysis (FEA) simulation of practical behaviors for the micro actuator. Especially, electric field modeling in micro actuators has been generally restricted to in-plane two-dimensional finite element analysis because of the complexity of the micro actuator geometry. However, in this thesis, the actual three-dimensional geometry of the micro actuator is considered. The starting torque obtained from the in-plane two-dimensional analytical solutions were compared with that of the actual three-dimensional FE analysis results. The starting torque is proportional to $V^2$, and that the two-dimensional analytical solutions are larger than the three-dimensional FE ones. It is found that the evaluation of micro actuator has to be considered electrical leakage phenomenon.

• 조명전기설비학회논문지
• /
• 제19권8호
• /
• pp.24-32
• /
• 2005

마이크로소스는 1[KW]${\sim}$수[MW] 사이의 전력을 공급하고, 기존의 대규모 발전설비보다 높은 신뢰도와 에너지 효율을 가지는 고품질의 전력을 공급할 수 있다. 이들은 크기가 작고 설치가 용이하여 빌딩, 산업체, 가정 등과 같은 수용가 측의 부하와 클러스터를 형성하여 마이크로그리드로 운전된다. 마이크로소스는 부하단의 전압 등의 전압품질을 제어하기 위하여 전압원형 인버터를 채용하고 있다. 본 논문에서는 다수의 마이크로소스가 계통에 연계되었을 때의 마이크로소스의 모델링 및 제어시스템의 특성에 관하여 연구하였다. 전력주파수 영역에서의 기본파 정상상태 인버터 모델을 이용한 마이크로소스의 EMTDC 모델을 개발하였으며, 이를 통해 마이크로소스의 제어시스템 파라미터에 따른 제어특성을 분석하였다. 컴퓨터 시뮬레이션을 통하여 제안된 모델의 효용성을 확인하였다.

• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.526-535
• /
• 2018

최근, 도서지역에서는 $CO_2$ 배출의 저감을 위하여, 디젤발전기의 가동률을 줄이고 신재생에너지전원의 비중을 높여, 계통을 안정적으로 운용할 수 있는 방안들이 연구되고 있다. 특히, Carbon free를 목표로 하는 도서지역용 Micro-grid에서는 CVCF(constant voltage & constant frequency) 인버터를 기반으로 운용되는데, CVCF 인버터용 배터리의 SOC(state of charge) 상태에 따라, 계통의 부하소비 보다 신재생에너지전원의 출력이 큰 경우에 CVCF 인버터 내에서 발생하는 에너지 Sinking에 의하여, 배터리측 전압이 급격히 상승하여, 인버터의 과전압 보호동작에 의해 CVCF 인버터가 급격하게 탈락되어 계통에 정전이 발생하는 문제점이 일어날 수 있다. 따라서, 본 논문에서는 CVCF 인버터를 기반으로 한 도서지역용 Micro-grid의 안정적인 운용을 위하여, 에너지 Sinking 시에 발생 가능한 CVCF 인버터의 탈락을 사전에 방지하는 과도상태 운용알고리즘을 제안한다. 또한, PSCAD/EMTDC의 모델링을 이용하여, 제안한 알고리즘을 적용한 Micro-grid의 과도상태 운용특성을 분석한 결과, 배터리의 전압과 SOC에 따라 CVCF 인버터가 탈락하는 과도상태를 사전에 방지할 수 있어, 본 논문의 유용성을 확인하였다.

• 한국광학회지
• /
• 제14권3호
• /
• pp.306-311
• /
• 2003

본 논문에서는 광전송시스템에서 파장분할다중화 광소자로 사용되는 박막필터형 광소자의 특성 분석 및 평가를 위해 입력광원을 모델링 하였으며 광경로에 대해 광선추적법을 사용하여 전산모의 한 광특성을 실험과 비교, 분석하였다. 그 결과 입력광원에 대한 cell 방식의 모델링이 결합효율의 정확도 및 가우시안 강도분포에 접근성을 볼 때 마이크로 옵틱스형 광소자 분석함에 있어 적합함을 알 수 있다. 박막필터형 광소자에 대한 최적 전산모의 결과 광섬유와 GRIN 렌즈 사이 거리가 0.24mm이며 GRIN 렌즈와 박막필터 사이 거리가 0.25mm일 때 최대 결합효율은 -0.11 ㏈이었으며 동일한 조건에의 실험결과 -0.35 ㏈의 최대 결합효율을 얻었다. 이것은 단심 및 이심페룰, GRIN 렌즈 등과 같은 구성품의 불완전성과 박막필터에 의한 손실을 고려할 때, 전산모의 결과와 매우 일치하는 것으로서 본 연구에서 제안한 입력광원의 모델링을 적용한 전산모의가 박막필터형 광소자의 특성을 예측할 수 있음을 보였다.

• The Journal of Advanced Prosthodontics
• /
• 제7권4호
• /
• pp.294-302
• /
• 2015

PURPOSE. The purpose of this study was to verify the clinical-feasibility of additive manufacturing by comparing the accuracy of four different manufacturing methods for metal coping: the conventional lost wax technique (CLWT); subtractive methods with wax blank milling (WBM); and two additive methods, multi jet modeling (MJM), and micro-stereolithography (Micro-SLA). MATERIALS AND METHODS. Thirty study models were created using an acrylic model with the maxillary upper right canine, first premolar, and first molar teeth. Based on the scan files from a non-contact blue light scanner (Identica; Medit Co. Ltd., Seoul, Korea), thirty cores were produced using the WBM, MJM, and Micro-SLA methods, respectively, and another thirty frameworks were produced using the CLWT method. To measure the marginal and internal gap, the silicone replica method was adopted, and the silicone images obtained were evaluated using a digital microscope (KH-7700; Hirox, Tokyo, Japan) at 140X magnification. Analyses were performed using two-way analysis of variance (ANOVA) and Tukey post hoc test (${\alpha}=.05$). RESULTS. The mean marginal gaps and internal gaps showed significant differences according to tooth type (P<.001 and P<.001, respectively) and manufacturing method (P<.037 and P<.001, respectively). Micro-SLA did not show any significant difference from CLWT regarding mean marginal gap compared to the WBM and MJM methods. CONCLUSION. The mean values of gaps resulting from the four different manufacturing methods were within a clinically allowable range, and, thus, the clinical use of additive manufacturing methods is acceptable as an alternative to the traditional lost wax-technique and subtractive manufacturing.

• 대한기계학회논문집B
• /
• 제24권7호
• /
• pp.895-906
• /
• 2000

A three dimensional linear frequency-domain lifting surface panel method was used for the aerodynamic analysis of axial flow type micro-fans. As proven by the duct modeling, the tip clearance of the micro-fans tested is large enough to ignore the calculated effect of the duct system. As the numerical results and experimental data agreed well in the operating point region, the method was applicable in the parametric studies to determine the design parameters of axial flow fans. Experiments on micro-fans were carried out based on KS B 6311. The newly designed micro-fan showed improvements in both static pressure rise and volumetric flow rate compared to the existing fans at a given operating condition. No detection of surging and the smooth characteristic curve proved the improvement in performance. To reduce the fan noise in the fan design, it was necessary to make use of the frequency spectrum analysis data. Measurement of sound pressure level for micro-fans was conducted based on KS B 6361 and KS A 0705. The peak - which occurs at blade passage frequency and its higher harmonics due to the fan noise - was not detected. This justifies the design methodology of the blade.