• 마이크로전자및패키징학회지
• /
• 제8권3호
• /
• pp.1-9
• /
• 2001

본 논문에서는 마이크로 납볼 격자 배열 ($\mu$BGA)패키지의 검사 알고리듬을 제안하였다. 이 알고리듬의 개발은 납볼 배열의 미세 크기 때문에 사람의 사각으로는 결함을 식별하기 어려운 점에 기인하였다. 특히, 여기에서 보인 자동 시각 $\mu$BGA 검사 알고리듬은 소위 말하는 이차원 오차뿐만 아니라 볼의 높이 오차까지 검사할 수 있다. 검사 알고리듬은 특수하게 제작된 청색 조명 하에서 이차원 $\mu$BGA 영상을 사용하고 회전 불변 알고리듬으로 영상을 처리하였다. 그리고 2개의 카메라를 사용하여 높이 오차를 검출할 수 있었다 모의실험결과, 제안한 알고리듬이 기존 방법에 비하여 괄목할 만큼 납볼 결함을 검출할 수 있음을 보였다.

• 비파괴검사학회지
• /
• 제22권2호
• /
• pp.193-197
• /
• 2002

레일리 (Rayleigh) 표면탄성파의 속도와 산란의 주파수 의존성을 이용하여 마모로 인해 열화된 AISI 1045강 사편의 깊이방향 잔류응력 분포 (열화 기울기)의 비파괴적인 평가가 시도되었다. 액체/고체 경계면에 초음파가 특정각도로 입사할 때 발생한 표면탄성파의 산란과 복사로 인해 나타나는 후방복사 프로파일의 오른쪽 반치폭과 크기 그리고 발생각으로 잔류응력 분포의 해석도 가능하였으며 평균법에 의한 복사파의 세기 및 스펙트럼의 변화는 잔류응력 분포와 열화로 인해 발생한 미세 결함 밀도과의 연관성을 보여주었다.

• 대한치과교정학회지
• /
• 제51권5호
• /
• pp.304-312
• /
• 2021

Objective: This study aimed to compare the amount of tooth movement after multiple horizontal (MH) and single vertical (SV) micro-osteoperforations (MOPs), and evaluate the histological changes after orthodontic force application in rabbits. Methods: The mandibles of 24 white rabbits were subjected to two experimental interventions: MH and SV MOPs. Defect volume of the MOPs between the two groups was kept similar. A force of 100 cN was applied via a coil spring between the incisor teeth and the first premolars. The amount of tooth movement was measured. Differences in the amount of tooth movement and bone variables at three time points and between the two groups were evaluated using repeated-measures analysis of variance. Results: The first premolar showed a mesial movement of 1.47 mm in the MH group and 1.84 mm in the SV group, which was significantly different at Week 3 (p < 0.05). No significant difference was observed in bone volume and bone fraction between the groups. Tartrate-resistant acidic phosphatase-positive cell count was also significantly greater at Week 3 than at Week 1 in both the SV and MH groups. Conclusions: The amount of tooth movement showed significant differences between Weeks 1 and 3 in the SV and MH MOP groups, but showed no differences between the two groups. Therefore, SV MOP could be considered an effective tool for enhancing tooth movement, especially for molar distalization, uprighting, and protraction to an edentulous area.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.188-194
• /
• 2011

The purpose of this paper is to explain the implementation method in order to enhance stability and reliability of embedded system. In this research, Texas Instrument (TI)'s TMS570 MCU(Micro Controller Unit) is used to satisfy the standard of stability that is IEC 61508. IEC 61508 suggest SIL(Safety Integrity Level) from 1 to 4 and TMS570 is satisfied SIL3. Also, TMS570 can provide several stability functions can be used in realtime system. To use such functions, this paper suggest the solution about the defect that can be used in realtime system. In basic way TMR(Triple Modular Redundancy) suggested in addition to explain about the way to improve safety and reliability. Also this paper will suggest the method that reinforce the stability of calculation by using multiplex voter and memory.

• 한국정밀공학회지
• /
• 제9권2호
• /
• pp.122-127
• /
• 1992

In this study, we investigated defects of graphite by three NDT methods which are ultrasonic testing at 5 MHz, micro-forused X-ray testing and AE testing. As the detection of AE signals generated from graphite tensile specimens, we calculated location of AE sources and compared them with UT and X-ray test results in detecting defects of several specimens, Acoustic emission testing could be applied to some graphites which have fine grains of a few tens of micrometer, but it was difficult to those in lager grain of few fo milimeter. Also, we could understand what kind of defects has affected on tensile fracture of graphite.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.69-72
• /
• 2007

Cellulose is a beneficial material that has low cost, lightweight, high compatibility and biodegradability. Recently electroactive paper (EAPap) on cellulose base was discovered as a smart material and actuator through ion migration and piezoelectric effect. Furthermore cellulose has a potentiality to apply the display material, because of its high reflectivity, flexibility and high transmittance. The various shapes and height patterns of the Cellulose acetate (CA) solution, such as circle and honeycomb patterns, were fabricated and observed by field emission scanning electron microscope (FESEM, S4300 Hitachi). The resulting pattern showed uniform size in the large area without defect. After stretching the CA film with saponification process in the sodium methoxide in methanol solution, Most of the compositions become one directional ordered nanofibers below 50nm.

• 동력기계공학회지
• /
• 제15권3호
• /
• pp.58-64
• /
• 2011

As well known, the friction stir welding is a novel welding process which is a solid state welding process for sheet or plate using the friction stir phenomenon. This paper describes the effect of welding condition such as the rotation speed and the travelling speed during the friction stir welding process on the micro Virkers hardness and the microstructure of friction stir welded joints in AI-7075-T651 plate. From those investigations, the highest hardness of stir zone was observed at the welding condition of SO-3. The microstructures of the friction stir welded joints was not dependent on the welding conditions, but in the SO-4 specimen, the friction stir welding defect like tunnel shape was found in stir zone.

• 한국진공학회지
• /
• 제16권1호
• /
• pp.23-26
• /
• 2007

AZ91D의 마그네슘합금을 열처리별 온도에 따라서 광반사 및 전자현미경 측정을 하였다. 광반사 측정 결과 열처리 한 시료에서 carbon defect에 대한존재를 확인하였으며, 전자현미경 측정을 통하여 열처리 후에 산화막이 더 균일하게 성장되는 것을 확인하였다.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.13-18
• /
• 2006

In spite of frequent defect in industrial boilers, life assessment or diagnostic method for them has not been actively studied. In this research, SS400 carbon steel used in industrial boilers is simulated with artificial aging heat treatment. To do qualitative life assessment, differences in micro-structures and hardness of SS400 by the degradation time are studied. In addition, variation in material properties by aging was observed with the tensile test at room temperature and $179^{\circ}C$ and changes in ductile to brittle transition temperature was observed with the charpy impact test performed at several test temperature.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.122-130
• /
• 2001

Induction surface hardening is widely used to enhance local strength and hardness. However, most research is only to have a focus on fatigue life and fatigue behavior is not so much studied. So, in this study, Cr-Mo steel alloy(SCM440) was used to show the effect of residual stress and micro hole on the fatigue strength fur base metal and induction surface hardened specimen. In addition, the fatigue characteristic between surface hardened and fully hardened steel is somewhat different. It is caused by hardness distribution, residual stress and inclusions etc.. The modification of prediction equation of fatigue strength is proposed and predicted results show very good accuracy. A $textsc{k}$, which is calculated 1.46, is introduced to consider the effect of stationary crack with defect. A new method of modifying residual stress is proposed to examine the mean stress effect under fatigue loading.