• 멤브레인
• /
• 제12권4호
• /
• pp.207-215
• /
• 2002

한정된 미세공간에서의 제한확산(hindered diffusion)은 멤브레인 기공(pore)에서 입자들의 운동에 의해 결정되는 여과 메카니즘을 매우 미세한 수준에서 이해하는데 중요한 현상이다. 구형(spherical) 콜로이드 입자에 비해 보다 복잡한 형태(conformation)인 고분자사슬 구조를 갖는 다가전해질(polyelectrolyte)의 제한확산 거동에는 다양한 인자들이 관련되어 있기 때문에, 이론 접근은 물론 실험적 접근도 한층 어려운 것이 사실이다. 본 연구에서는, 슬릿형 미세기공에 한정되어 있는 단일한 다가전해질(single polyelectrolyte)에 coarse-grained bead spring model과 먼거리(long-range) 정전상호작용(electrostatic interaction)인 Debye-Huckel potential을 적용하여 분자시뮬레이션 기법인 브라운 동력학 모사를 수행하였다. 기공과 다가전해질 사슬(Polyelectrolyte chain)의 주어진 크기에서, 용액의 전해질 이온농도가 감소함에 따른 사슬의 신장(extension)효과는 제한확산계수를 감소시켰고, 기공 벽면의 하전성은 제한확산계수를 더욱 감소시켰다. 이는, 다가전해질 사슬(polyelectrolyte chain)의 입체적 장애(steric hindrance)와 함께 정전반발력이 미세기공에서의 확산이동을 억제함을 의미한다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2015년도 임시총회 및 하계학술연구발표회
• /
• pp.161-163
• /
• 2015

The micro device, coil, and channel for the biosensor integrated with the GMR-SV device based on the antiferromagnetic IrMn layer was fabricated by the light lithography process. When RBCs coupled with several magnetic beads with a diameter of $1{\mu}m$ passed on the micro channel, the movement of RBC + ${\mu}Beads$ is controlled by the electrical AC input signal. The RBC + ${\mu}Beads$ having a micro-magnetic field captured above the GMR-SV device is changed as the output signals for detection status. From these results, the GMR-SV device having the width magnitude of a few micron size can be applied as the biosensor for the analysis of a new magnetic property as the membrane's deformation of RBC coupled to magnetic beads.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.17-24
• /
• 2009

The Friction Stir Welding(FSW) has mainly been used for making butt joints in Al alloys. Development of Friction Stir Lap Welding(FSLW) would expand the number of applications. Microstructure of FSLW in A5052-H112 alloy was investigated under varying rotation and welding speed. As the rotation speed was increased and the welding speed was decreased, a amount of heat was increased. As a result, bead interval was narrower, bead width are larger, and experimental bead interval was almost similar to theoretical bead interval. Typical microstructures of FSLW A5052-H112 alloy consist of three zones, including Stir Zone(SZ), Thermo-Mechanically Affected Zone(TMAZ) and Heat Affected Zone(HAZ). As a amount of heat was increased, average grain size was larger in three zones. Nevertheless, the aspect ratio was almost fixed for FSLW conditions. The misorientation of SZ, HAZ and TMAZ was examined. A large number of low angle grain boundaries, which were formed by severe plastic deformation, were showed in TMAZ as comparison with SZ and HAZ. Microhardness distribution was high in order of BM, SZ, TMAZ, and HAZ. The Micro-hardness distribution in HAZ, TMAZ of upper plate were lager than lower plate. Relationship between average grain size and microhardness was almost corresponded to Hall-Petch equation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1466-1467
• /
• 2008

We describe here a novel micro total analysis system for the purification and identification of the affinity-captured proteins. Also we demonstrated the mass analysis of the Carcinoembrionic antigen (CEA) and Alpha femtoprotein which were chosen as the target cancer marker. For MALDI-TOF analyses, the proteins should to be separated from a protein mixture and be concentrated when needed. This procedure usually takes a long time even before protease-digested samples are to be obtained from them. Here, we describe integrated and efficient micro chip for protein purification and digestion for MALDI-TOF analyses. At first, disease protein is purified by passing the micro chamber from a protein mixture or human whole serum and released from the micro affinity beads by thermal heating. Purified protein is then transfer to the hole for trypsin digestion. The final sample is analyzed by MALDI-TOF. All the processes could be finished successfully within one hour, which renders MALDI-TOF analyses of a target protein quite simple.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.158-160
• /
• 2006

Super alloys are typically used for the liquid thruster in the aerospace industry. In this work, The bead-on-plate welding of Inconel 600, Inconel 625 and Haynes 230 using Nd:YAG laser are studied, in order to examine the effects of experimental parameters on their weldability. The micro-hardness and tensile strength of the specimens are also analyzed, to obtain the optimal welding conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.93-94
• /
• 2006

• 한국레이저가공학회지
• /
• 제3권2호
• /
• pp.45-51
• /
• 2000

In this paper, the possibilities and the limits of the laser seam welding were studied to utilize the advantageous properties of amorphous metal foils. For the conventional welding method, the high heat transfer makes the crystallized zone of the work material unavoidable. The laser is able to weld the amorphous metal without a crystallized zone, because heat transfer is limited within a very small restricted volume. The crystallized zone is restricted in the neighbor of welding spot and not in the melting area. This can be proved directly by the etching and indirectly by the tensile shear test, micro hardness test and bending test. The overlapping of welding bead could form the formation of wider and thicker amorphous zone.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.1046-1050
• /
• 2005

Micro Cellular Plastics create a sensation at polymer industrial for lowering product cost & overcoming a lowering of mechanical intensity. There Is much development from injection molding pans but Extrusion parts is slow. This research is MCPs Extrusion parts, It is basis experiment for Process to make beads that is basis raw material of Package used most by shock mitigative of industry.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1429-1434
• /
• 2004

Immunoassay is one of the important analytical methods for clinical diagnoses and biochemical studies, but needs a long time, troublesome procedures and expensive reagents. In this study, therefore, we propose the micro filter chip with microbeads for immunoassay, which has pillar structures. The advantage of the proposed micro filter chip is to use simple fabrication process and cheap materials. The mold was made by the photolithography technique with Si wafer and negative photoresist SU-8. The replica was made of PDMS, bonded on the pyrex glass. The micro filter chip consists of inlet channel, filter chamber and outlet channel. HBV (Hepatitius B virus) monoclonal antibody (Ag1) labeled with biotin were immobilized onto streptavidin coated beads of 30∼50 $\mu$m size. Fluorescein isothiocyanate (FITC)-labeled HBV monoclonal antibody (Ag8) was used to detect HBsAg (Hebatitis B virus surface Antigen), and fluorescence intensity was monitored by epi-fluorescence microscope. In this study, the immune response of less than 30 min was obtained with with the use of 100 $m\ell$ of sample.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.905-909
• /
• 2010

Magnetic beads (Dynabeads$^{(R)}$) embedded in ~1 micron size polystyrene beads bearing surface carboxylic acid groups were modified with aminobenzyl ethylenediaminetetraacetic acid (ABEDTA) to concentrate or separate metal ions using pH gradients on micro and nano scales. The immobilization of ABEDTA was achieved by amide formation. The presence of the metal chelating functional group in the fully deprotonated form was confirmed by FT-IR. The chelation efficiency of beads was tested by determining metal ions in supernatant using GFAAS when pH gradients from 3 to 7. Mixtures of Cu and Mg and of Cd and Mn (at 10 ng/mL of metal) were separated as the difference in formation constant with the functional group of ABEDTA. The separation was repeated twice with relative standard deviation of <18%. A polydimethylsiloxane (PDMS) microchip column packed with EDTA-coated magnetic beads was optimized to concentrate metal ion for practical applications by eluting a Cu solution of micro scale at pH 3.