• 원예과학기술지
• /
• 제33권4호
• /
• pp.479-485
• /
• 2015

본 연구는 배 '만수' 품종의 열과 발생의 원인과 재배 조건을 구명하여 발생을 경감시킬 수 있는 재배 방법을 제안하고자 수행하였다. 미세 열과는 성숙기 과실에서 발견되었다. 미세 열과의 발생은 8월 중의 일조 시간과 밀접한 관련을 나타내었다. 발생이 심했던 해에는 일조 시간이 부족하였으며, 발생이 적었던 해에는 일조 시간이 길고 일조량이 많은 날이 연속되어 광 조건이 우수하였다. Y자 수형보다는 평덕식에서 많이 발생하였고, 인공 관수구와 무관수 처리구에서 미세 열과 발생률의 차이는 나타나지 않았다. 무대 처리구에서는 미세 열과가 전혀 발생하지 않았으나, 외피가 흑색과 황색인 봉지를 이용한 처리구에서의 미세 열과 발생은 각각 62.2% 및 17.3%로 흑색 봉지 처리구에서 미세 열과가 심하게 발생하였다. 따라서 '만수' 과실의 미세열과 발생은 일조 시간, 수형 및 봉지 색에 따라 차이를 보여 광 조건이 가장 크게 작용하는 것으로 판명되었다. '만수' 과실의 미세열과를 방지하기 위해서는 적합한 수형 및 봉지 색을 선택하고, 하계전정 등을 통해 광 조건을 개선하는 것이 요구된다.

• 콘크리트학회논문집
• /
• 제22권1호
• /
• pp.69-76
• /
• 2010

콘크리트의 수축으로 인한 균열가능성 평가에 있어서 대부분의 경우 콘크리트를 균질한 물질로 가정하는 방식으로 접근하고 있다. 그러나 이러한 방식으로 접근할 경우 불구속조건 하의 콘크리트에서 자기수축으로 인한 미세균열(micro-cracking) 현상을 평가하는 것이 불가능함과 동시에 콘크리트 내부의 균열 발생 현상을 이해하는데 한계가 있다. 이에 이 연구에서는 시멘트 모르타르 시험체를 가지고 실험적으로는 음향방출(acoustic emission) 장비를 사용하여 내부 균열 발생량을 측정 및 평가하였으며, 이론적인 접근방식의 일환으로 실제 모르타르 시험체로부터 구하여진 이차원 이미지를 사용하여 NIST에서 개발한 OOF code로 유한요소해석을 수행하였다. 실험 및 해석 결과, 모르타르의 내부에서 시멘트 페이스트상의 수축 및 골재의 내부구속으로 인하여 발생하는 미세균열 발생 현상을 보다 현실적으로 이해할 수 있었다.

• 대한토목학회논문집
• /
• 제28권2A호
• /
• pp.249-257
• /
• 2008

인장에 취약한 단점을 가지고 있는 시멘트계 복합재료인 모르타르와 콘크리트의 인장성능을 보강하기 위한 다양한 방법이 사용되고 있으며, 주요한 한가지 방법으로 인장에 강한 섬유를 혼입하는 섬유보강 콘크리트가 꾸준히 연구사용되어 왔다. 최근에는 재료의 균질성(homogeneous)을 높이고 보강재로 사용되는 섬유의 성능을 최대한 이끌어내기 위하여 굵은 골재를 제거하고 마이크로 섬유를 사용하는 마이크로 섬유보강 모르타르에 대한 연구가 활발히 진행되고 있다. 마이크로 섬유보강 모르타르는 배합조건에 따라서 다중균열이 발생하기 때문에 성능평가의 지표로써 휨인성 만을 사용하기에는 부족함이 있다. 따라서, 본 연구에서는 마이크로 섬유보강 모르타르의 휨인성과 균열 특성을 고찰하여, 균열특성을 나타낼 수 있는 측정치에 대한 연구를 수행하였다. 실험에는 PVA섬유와 강섬유가 사용되었으며, 휨실험을 통하여 섬유의 종류 및 혼입량에 따른 휨인성과 균열관련 측정치의 상관관계를 규명하였다. 그 결과 마이크로 섬유보강 모르타르의 특성을 대표할 수 있는 측정치로는 휨인성과 섬유혼입량, 그리고 균열개수 등이 적절한 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.657-662
• /
• 2003

In this study. a micro-corrosion model of steel in RC structure is established for micro-structure development in view to micro-mechanics and the model is composed of chloride penetration model and oxygen diffusion model to evaluate for corrosion rate and accumulated corrosion amounts. Also the model is composed of corrosion-cracking model for prediction of corrosion-cracking. The time and space dependent induced corrosion-cracking of RC structures including changes of corrosion rates and concentrations of chloride ion are simulated using the finite element analysis adopted the proposed model Then, results of the analysis are compared with test results for verification.

• Corrosion Science and Technology
• /
• 제22권4호
• /
• pp.265-272
• /
• 2023

The aim of this study was to develop a new in-situ observation method and instrument in micro-scale to investigate the mechanism of stress corrosion cracking (SCC) initiation of Ni-base alloys in a high temperature water environment of pressurized water reactors (PWRs). A laser confocal microscope (LCM), an autoclave with diamond window view port, and a slow strain-rate tester with primary water circulation loop system were components of the instrument. Diamond window, one of the core components of the instrument, was selected based on its optical, chemical, and mechanical properties. LCM was used to observe the specimen in micro-scale, considering the experimental condition of a high-temperature primary water environment. Using in-situ method and instrument, it is possible to observe oxidation and deformation of specimen surface in micro-scale through the diamond window in a high-temperature primary water in real-time. The in-situ method and instrument developed in this work can be utilized to investigate effects of various factors on SCC initiation in a high-temperature water environment.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.38-42
• /
• 2002

An apparatus was developed to repetitively apply a $-196^{\circ}C$ thermal load to coupon-sized mechanical test specimens. Using this device, IM7/5250-4 (carbon / bismaleimide) cross-ply and quasi-isotropic laminates were submerged in liquid nitrogen ($LN_2$) 400 times. Ply-by-ply micro-crack density, laminate modulus, and laminate strength were measured as a function of thermal cycles. Quasi-isotropic samples of IM7/977-3 (carbon / epoxy) composite were also manually cycled between liquid nitrogen and an oven set at $120^{\circ}C$ for 130 cycles to determine whether including elevated temperature in the thermal cycle significantly altered the degree or location of micro-cracking. In response to thermal cycling, both materials micro-cracked extensively in the surface plies fellowed by sparse cracking of the inner plies. The tensile modulus of the IM7/5250-4 specimens was unaffected by thermal cycling, but the tensile strength of two of the lay-ups decreased by as much as 8.5%.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.151-155
• /
• 2003

An apparatus was developed to repetitively apply a -196 $^{\circ}C$ thermal load to coupon-sized mechanical test specimens. Using this device, IM7/5250-4 (carbon / bismaleimide) cross-ply and quasi-isotropic laminates were submerged in liquid nitrogen (L$N_2$) 400 times. Ply-by-Ply micro-crack density, laminate modulus, and laminate strength were measured as a function of thermal cycles. Quasi-isotropic samples of IM7/977-3 (carbon / epoxy) composite were also manually cycled between liquid nitrogen and an oven set at 120 $^{\circ}C$ for 130 cycles to determine whether including elevated temperature in the thermal cycle significantly altered the degree or location of micro-cracking. In response to thermal cycling, both materials micro-cracked extensively in the surface plies followed by sparse cracking of the inner plies. The tensile modulus of the IM7/5250-4 specimens was unaffected by thermal cycling, but the tensile strength of two of the lay-ups decreased by as much as 8.5 %.

• International Journal of Concrete Structures and Materials
• /
• 제18권3E호
• /
• pp.213-219
• /
• 2006

Modified singular fracture process zone(S-FPZ) model is proposed in this paper to determine a fracture criterion for continuous crack propagation in concrete. The investigated fracture properties of the proposed fracture model are strain energy release rate at a micro-crack tip and the relationship between crack closure stress(CCS) and crack opening displacement(COD) in the FPZ. The proposed model can simulate the actual fracture energy of experimental results fairly well. The results of the experimental data analysis show that specimen geometry and loading condition did not affect the CCS-COD relation. However, the strain energy release rate is a function of not only specimen geometry but also crack extension. The strain energy release rate remained constantly at the minimum value up to the crack extension of 25 mm, and then it increased linearly to the maximum value. The maximum fracture criterion occurred at the peak load for specimens of large size. The fracture criterion remained at the maximum value after the peak load. The variation of the fracture criterion is caused by micro-cracking and micro-crack localization. The fracture criterion of strain energy release rate can simply be the size effect of concrete fracture, and it can be used to quantify the micro-cracking and micro-crack localizing behavior of concrete.

• International Journal of Concrete Structures and Materials
• /
• 제3권1호
• /
• pp.47-56
• /
• 2009

The first diagonal cracking and ultimate shear load of reinforced girder made of ultra high performance fiber reinforced concrete (UHPFRC) were investigated in this paper. Eleven girders were tested in which eight girders failed in shear. A simplified formulation for the first diagonal cracking load was proposed. An analytical model to predict the ultimate shear load was formulated based on the two bounds theory. A fiber reinforcing parameter was constituted based on the random assumption of steel fiber uniform distribution. The predicted values were compared with the conventional predictions and the test results. The proposed equation can be used for the first cracking status analysis, while the proposed equations for computing the ultimate shear strength can be used for the ultimate failure status analysis, which can also be utilized for numerical limit analysis of reinforced UHPFRC girder. The established fiber reinforcing theoretical model can also be a reference for micro-mechanics analysis of UHPFRC.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.683-686
• /
• 2004

In recent years, some attention was particularly given to cracking sensitivity of high performance concrete. It has been argued and demonstrated experimentally that such concrete undergoes autogenous shrinkage due to self-desiccation at early age, and, as a result, internal tensile stress may develop, leading to micro cracking and macro cracking. One possible method to reduce cracking due to autogenous shrinkage is the addition of expansive additive. Tests conducted by many researches have shown the beneficial effects of addition of expansive additive for reducing the risk of shrinkage-introduced cracking. However, the research on hydration model of expansion additive has been hardly researched up to now. This paper presents a study of the hydration model of Ettringite-Gypsum type expansive additive. Result of comparing forecast values with experiment value, proposed model is shown to expressible of hydration of expansive additive.