• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.2
• /
• pp.325-330
• /
• 2014

In order to operate trains both mainline railroad platform and metropolitan subway line platform, it is necessary to develop the door step equipment of the rolling stock regardless of low(500mm, mainline) and high level platforms(1,135mm, metropolitan subway line) because of the requisite door safety system. In this study, TMS-DCU interface is studied for low and high level railway platforms. As a result, Design circuit of TMS(Train Management System)-DCU(Door Control Unit) interface is suitable for telescopic sliding type doorstep unit to minimize damage to the carbody underframe of railway vehicles.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.387-395
• /
• 2002

As a result of an increase in population of the Metropolitan area and a steady change of circumstances in many parts, the city is sprawling out into the suburbs. This phenomenon causes the necessity of modification of present urban plan. It is risen as a point of issue that construction systems of new railway routes and underground construction, which should be followed the new urban plan in case of inter-regional railway and regional railway. It is hard to find sufficient financial resources, nevertheless the railway improvement definitely affects regional development and improvement of social environment. Also, there is a limit to government subsidies. In this respect, it is necessary to set up a new idea about movement of existing railway routes and improvement of the equipment. This study examines the present problems of railroad construction system in urban downtown area and introduces a suitable institutional way through referring to the instances of other countries.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1128-1136
• /
• 2016

• International Journal of Railway
• /
• v.5 no.1
• /
• pp.1-9
• /
• 2012

Reliability means that a product maintains its initial quality and performance at a certain period of time (time, distance, cycle etc) under given condition without failure. The given conditions include both environmental condition and operating condition. Environmental condition means a common natural environment such as temperature, humidity, vibration, and working condition means an artificial environment such as voltage, current load, place for installment, and hours of use, which occurs during the life of the product. In the field of railway vehicles, it is mandatory to use a part with the proved reliability as the extension of the life of vehicle become highly necessary. But the reliable assessment method for the reliability of the part is insufficient. If the reliability of the railway vehicle parts could be assessed by using the field data, the reliability of the entire system could also be evaluated reliably. In this study, life span of micro-switch for master controller is analyzed and prediction is performed based on its field data given by an operator considering the special circumstances of railway vehicles such as the operation of a large number of trains on the same line.

• Journal of the Korean Society for Railway
• /
• v.15 no.6
• /
• pp.631-637
• /
• 2012

New Opening of Suseo-Pyeongteak High Speed Railway (HSR) will be a new leap in the Korean railway history. However if this section of HSR line around Seoul Metropolitan Area opens, the confluence of new HSR and existing HSR line in Pyeongteak-Osong section will cause a bottle neck problem. In other words, the opening of Suseo-Pyeongteak HSR line will make the capacity of track reach the limit and the section of railroad between Pyeongteak and Osong will be saturated. This will also make such troubles as restricting the number of train which stops at Cheonan-Asan station. In this study, based on the train assignment theory of TVM430 signal system, the methods of calculating headway and number of train are reviewed and the plan for application of optimal operation pattern during peak hour between Pyeongteak-Osong section is also suggested. To remove the bottle neck problem in this HSR section, 3 alternatives are suggested and the expected effects and problems of each alternative are also analyzed. The results show that the troubles caused by excess of track capacity can be removed without any additional cost if the minimum headway in operating system for HSR is adopted in this section. In the future, if these alternatives are considered to the long-term plan for operating train and signal systems, this will improve the efficiency of train operation, which can remove the bottle neck in the HSR line.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.59-76
• /
• 2020

As a continuous increase in demand for the transportation infrastructure in the metropolitan area, the renovation of existing metropolitan and urban railway lines for the rapid transport system requires the construction of sidetrack that can operate local and express trains simultaneously. However, the construction of sidetrack after stopping the operation of the existing subway line causes a lot of economic losses, therefore it is essential to study the tunnel enlargement scheme during the operation of the existing subway tunnel. Accordingly, in this paper, basic research on the enlargement plan of the existing subway tunnel was carried out for the renovation of the existing subway line. In order to investigate the method for the sidetrack construction, the Government Complex Gwacheon station on the Gwacheon line of subway line 4 was selected as a virtual research station. Subsequently, four construction plans including tunnel cross-sectional plan for each section were reviewed and constructability and economic feasibility were compared. Finally, the stability assessment was conducted for the selected construction plan which was considered to be relatively unstable by 3-D full numerical analysis considering the sidetrack construction process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.618-624
• /
• 2017

In Seoul and most metropolitan cities, urban trains are delayed due to high congestion during commute times. The delay effect of passengers boarding and disembarking is also significant. In this study, a wide passenger door system was developed as a way to improve the scheduled speed of urban trains by decreasing the passengers' flow time. The door size was defined experimentally to shorten the entrance time. The optimum door size was also determined to improve the stop precision performance of the train while considering the interference effect with peripheral devices. Because the change in door size changes the structural characteristics of the vehicle, the structural stability of a train was analyzed numerically. A prototype of the wide door system was made, and the proposed design was verified using functional and endurance tests. The systematic development process can be used as design data for door size definition and system production when applying a wide door to improve the scheduled speed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.722-728
• /
• 2017

As the demand for high-speed railway, light railway, and metropolitan railway is increasing, the demand for safe and comfortable railways is increasing. The evaluation technology for a railway system manufactured according to this trend is becoming more important. This study examined the domestic and foreign technology trends through patent analysis of the railway test technology. To accomplish this, the patents filed in Korea, Europe, and the United States since 1990 were analyzed using Thomson Innovation DB. First, the technology was classified as a component test, combined test, and on-line test. Through patent analysis, the technology trends in the railway test technology and how the technological progress has been made from the past to the present were reviewed. In addition, through an analysis of the country and main applicant, this study examined the countries and applicants that are actively developing technologies. In addition, the countries that have secured technology related to the test technology were studied through an analysis of the market security index and the influence index. Through this analysis, this study analyzed the trend of the test technology in the railway area.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1344-1368
• /
• 2007

The Advanced countries including Japan, USA and European countries are adopting automatic system(e.g., auto-measurement using CCD camera) for measuring pantograph sliding plate and wheel abrasion to minimize manpower for E.M.U(Electric Multiple Unit) inspection and maintenance as part of management rationalization of railroad Corporation since late 1980's. In Korea, as part of scheme of business rationalization, automatic system for measuring pantograph sliding plate and wheel abrasion started to draw industry attention since late 1990s, and the system started to be installed in newly built depots of Korea Railroad Corporation since 2002. This study hopefully provides the base for realizing business rationalization and applying the advanced technology developed by Korea, the country of powerful IT basis, to overseas railroad organizations by examining automatic system for measuring pantograph sliding plate abrasion using existing CCD cameras produced domestically and in foreign countries to study cases(organizations in Korea) for improvement of measurement, management and inspection of pantograph sliding plate abrasion using CCD cameras with new cutting-edge technology; and by applying the study result to railroad organizations in metropolitan areas in Korea.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.656-662
• /
• 2016

Based on time dependent location data of mobile phone users, users' ODs were produced after tracing their travel route and inducing their origins and destinations. System considered average signalizing frequency, which means that the longer the travel length is the more frequent the signal is. This is a home-based OD and is limited to the Seoul Metropolitan area. The OD matrix from the mobile phone data which was aggregated to the cell and transformed to the 'Dong' area, was compared to the KTDB OD. The results can be analyzed and it was determined that they are highly correlated because individual coefficients are 0.98 and 0.85, the former between the OD of this study and the KTDB Si/Gun/Gu unit area OD and the latter between the OD of this study and the Dong unit area KTDB OD.