• Journal of Pharmaceutical Investigation
• /
• 제19권3호
• /
• pp.145-154
• /
• 1989

Methyl methacrylate-butyl methacrylate copolymer (MMBM)-povidone (PVP) films were investigated as a potential topical drug delivery system for the controlled release of econazole nitrate as a model drug. The effect of changes in film composition, drug concentration, film thickness, pH and temperature of release medium on the in vitro release of econazole nitrate were studied. The release rate constant was found to be increased with increasing povidone content in dry films. Drug release followed zero-order kinetics in the initial stage and then release rate increased gradually with time, espicially in the films having larger proportions of PVP. The release rate was found to be dependent on drug content, film thickness, the pH and temperature of release medium. Antimicrobial test showed that microbial growth was inhibited markedly with increasing proportions of PVP in films. Also drug content and film thickness affected the antimicrobial activity.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.425-430
• /
• 2003

Two types of poly(n-butyl acrylate) copolymer/silicate nanocomposites have been produced: poly(n-butyl acrylate-co-methyl methacrylate) [P(BA-co-MMA)]/silicate nanocomposites and poly(n-butyl acrylate-co-styrene) [P(BA-co-ST)]/silicate nanocomposites. The P(BA-co-MMA)/silicate nanocomposites shows the exfoliated structures but a P(BA-co-ST)/silicate nanocomposites have intercalated structures, because the BA/MMA comonomer has a higher polarity (e-value in Q-e scheme) than the BA/ST comonomer. The BA/MMA comonomer expanded the interlayer space of the silicate wider than did the BA/ST comonomer. The thermal degradation onset point of the P(BA-co-MMA)/silicate nanocomposites was 43$^{\circ}C$ higher than that of pure P(BA-co-MMA). P(BA-co-MMA)T5%, P(BA-co-MMA)T10%, and P(BA-co-MMA)T20% exhibit 134,302, and 195% increases, respectively, in their storage moduli at -20$^{\circ}C$ relative to the pure copolymer.

• 공업화학
• /
• 제18권2호
• /
• pp.121-125
• /
• 2007

아크릴계 에멀젼의 내수성 및 촉감을 향상시키기 위해 유연하고 낮은 표면에너지를 가지는 실록산 단량체 및 올리고머와의 공중합체를 제조하였다. 아크릴 작용기를 갖는 실록산 단량체와 올리고머를 합성하고, n-butyl acrylate와 methyl methacrylate를 사용하여 실록산 함유 아크릴 삼원공중합체를 제조하고 표면자유에너지의 변화 및 점착특성을 조사하였다. 삼원공중합체의 Tg는 실록산 단량체의 주입 양이 증가함에 따라 감소하였으나, 올리고머의 경우는 양 말단의 아크릴기에 의해 가교반응이 일어남으로써 삼원 공중합체의 Tg는 증가하였다. 실리콘 단량체와 올리고머를 첨가함에 따라 tack 값과 표면에너지가 감소하는 것으로 내수성 및 촉감이 향상된 것을 확인하였다

• 폴리머
• /
• 제25권3호
• /
• pp.349-358
• /
• 2001

고내후성 시릴기를 함유하는 아크릴수지 도료를 제조할 목적으로, 먼저 아크릴수지를 단량체 n-butyl methacrylate, methyl methacrylate, n-butyl acrylate 및 3-methacryloxypropyl-trimethoxysilane (MPTS)을 사용하여 이들을 부가중합시켜 얻었다. 아크릴 공중합체의$T_g$를 $20^{\circ}C$로 조정하면서 MPTS 함량을 10, 20, 30wt%로 변화시켜 합성하였다. 아크릴수지 합성에서 실리콘 성분인 MPTS 양이 많아질수록 점성도가 저하되었으며, 고온에서의 열적 안정성은 향상되었다. 한편 합성된 아크릴수지를 백색안료와 블렌드하여 도료를 제조한 후 도막물성을 시험한 결과, 여러 가지 피도물에 대하여 우수한 접착력을 보였고 기타의 물성들도 대체로 좋게 나타났다. 내후성 시험은 옥외폭로시험, WOM 및 QUV의 3종류로 하였는데, 각종 측정 수치로 보아 MPTS 함량 30wt%인 아크릴수지 도료는 고내후성 도료임이 확인되었다.

• 한국응용과학기술학회지
• /
• 제19권2호
• /
• pp.131-136
• /
• 2002

As model waterborne acrylic coatings, mono-dispersed poly(butyl acrylate-methyl methacrylate) copolymer latexes of random copolymer and core/shell type graft copolymer were prepared by seeded multi-staged emulsion polymerization with particle size of $180{\sim}200$ nm using semi-batch type process. Sodium lauryl sulfate and potassium persulfate were used as an emulsifier and an initiator, respectively. The effect of particle texture including core/shell phase ratio, glass transition temperature and crosslinking density, and film forming temperature on the film formation and final properties of film was investigated using SEM, AFM, and UV in this study. The film formation behavior of model latex was traced simultaneously by the weight loss measurement and by the change of tensile properties and UV transmittance during the entire course of film formation. It was found that the increased glass transition temperature and higher crosslinking degree of latex resulted in the delay of the onset of coalescence of particles by interdiffusion during film forming process. This can be explained qualitatively in terms of diffusion rate of polymer chains. However, the change of weight loss during film formation was insensitive to discern each film forming stages-I, II and III.

• Journal of Pharmaceutical Investigation
• /
• 제17권3호
• /
• pp.111-126
• /
• 1987

Methyl methacrylate-butyl methacrylate copolymer (MMBM)-dibutyl phthalate (DBP) films were investigated as a potential topical drug delivery system for the controlled release of nitrofurazone. The kinetic analysis of release data indicated that drug release followed a diffusion-controlled granular matrix model, where the quantity released per unit area is proportional to the square root of time. DBP of several hydrophobic plasticizers selected was found to give the highest release of nitrofurazone. However, hydrophilic plasticizers such as propylene glycol and polyethylene glycol 400 had no controlled release properties and acceptable film formation. The effects of changes in film composition, drug concentration, film thickness, pH of release medium, and temperature on the in vitro release of nitrofurazone were analyzed both theoretically and experimentally. The release rate constant (k') was found to be proportional to DBP content, pH, and the temperature of release medium, but independent of film thickness, and drug concentration in a range of 0.1-0.4% by weight. The linear relationship was found to exist between the log k' and DBP content. The release of nitrofurazone from MMBM-DBP (8:2) films was found to be an energy-linked process. Two energy terms were calculated ; the activation energy for matrix diffusion was 13.45 kcal/mole, and the heat of drug crystal solvation was 27.26-29.34 kcal/mole. Observation of scanning electron micrographs and microscopic photographs showed that the incorporation of DBP in films increased markedly the particle size of nitrofurazone dispersed in the film matrix, comparing with the fine dispersion of nitrofurazone in pure MMBM film alone.

• 멤브레인
• /
• 제20권3호
• /
• pp.203-209
• /
• 2010

원자전달 라디칼 중합을 이용하여 poly(epichlorohydrine) (PECH)를 주사슬로 한 양친성 가지형 공중합체를 합성하였다. PECH로부터 poly(methyl methacrylate)(PMMA) 및 poly(butyl methacrylate)(PBMA)의 가지형 중합이 성공적임을 $^1H$ NMR과 FT-IR분석을 통해 확인하였다. 합성한 가지형 공중합체에 KI나 LiI 염을 도입하였을 때, ether 신축진동 피크가 낮은 wavenumber영역으로 이동하였으며, 이는 배위결합 상호작용 때문이다. PECH-g-PBMA 복합체의 이온 전도도는 PECH-g-PMMA 복합체에 비해 항상 높게 나타났는데, 이는 고무상인 PBMA 사슬의 높은 이동성으로부터 기인한 것으로 확인되었다. 최고 이온전도도 값은 질량비 10 wt%의 KI가 도입된 PECH-g-PBMA 전해질체에서 $2.7{\times}10^{-5}\;S/cm$로 나타났다.

• 폴리머
• /
• 제39권2호
• /
• pp.191-199
• /
• 2015

대표적인 범용 플라스틱인 폴리스티렌의 장점인 투명성을 유지하면서 단점인 낮은 내충격성을 보완하고자 투명한 아크릴레이트계 고분자의 단량체인 butyl acrylate(BA)와 methyl methacrylate(MMA)를 styrene(SM) 단량체와 현탁중합으로 중합하여 3원 공중합체를 제조하였다. SM/BA 2원 공중합체와 SM/BA/MMA 3원 공중합체를 제조하여 각각의 물성을 비교하였다. 또한 가장 충격강도가 좋은 3원 공중합체에 가교제인 dicumyl peroxide(DCP)의 함량을 변화시키면서 가교반응시켰다. 단량체의 중합조성비 및 가교제의 함량이 공중합체의 열적, 기계적 물성과 광학적 특성에 미치는 영향에 대해 확인하였다. 결론적으로 butyl acrylate의 함량이 증가할수록 충격강도는 높아지지만 SM/BA 2원 공중합체는 특정 조성에서 불투명하게 된다. 하지만, SM/BA/MMA 3원 공중합체는 모든 조성에서 투명하면서 비교적 높은 기계적 물성을 나타내었다. 또한 DCP의 함량이 증가할수록 기계적 물성을 높일 수 있었으나 투명성은 점차 낮아졌다.

• 접착 및 계면
• /
• 제5권4호
• /
• pp.1-8
• /
• 2004

다이싱 테이프에 사용되는 UV경화형 점착제를 아크릴 공중합체를 butyl acrylate, acrylic acid, methyl methacrylate를 용액 중합을 통해 중합한 뒤, trimethylolpropane triacrylate를 블렌딩하여 제조하였다. 제조된 점착제는 UV 조사량에 따라 접착력, 유리전이온도 ($T_g$)를 측정하였는데 UV 조사량이 증가할수록 접착력은 급격하게 감소하였고 $T_g$도 증가하였다. 웨이퍼 표면에 점착 샘플을 부착하여 UV 조사 후 박리하여 표면을 관찰한 결과 점착잔류물을 남기지 않았다.

• Bulletin of the Korean Chemical Society
• /
• 제19권11호
• /
• pp.1168-1171
• /
• 1998

Two kinds of second-order nonlinear optical copolymers were prepared by the copolymerization of the vinyl monomers containing NLO chromophore, methacrylic acid, and methyl methacrylate or butyl methacrylate. Glass transition temperatures (Tg of copolymers were around 130 ℃. The copolymers were soluble in common organic solvents such as tetrahydrofuran (THF), cyclohexanone, and N,N-dimethylformamide (DMF). The crosslinked copolymer was obtained by thermal treatment using pentaerythritol tetrakis(2-mercaptoacetate) as a crosslinker and became insoluble in tetrahydrofuran (THF) and N,N-dimethylformamide (DMF). Poling was carried out at 120 ℃ for 20 min and identified with UV-Vis spectroscopy. Electro-optic coefficient (r33) measurement showed a value of 35 pm/V for polymer 2 at 633 nm. Temporal stability of copolymers was improved owing to the crosslinked network, which was successfully obtained at 170 ℃ for 30 min after poling.