• Neonatal Medicine
• /
• v.18 no.1
• /
• pp.137-142
• /
• 2011

Purpose: In relation to perinatal healthcare, medical institutions and resources are limitative and also are in a state of flux due to the therapeutic specialty. We analyzed requests for interhospital transfers received by Busan 1339 Emergency Medical Information Center (EMIC) to grasp the state of perinatal healthcare delivery system. Methods: This study was conducted on the basis of data inputted into the computing system of Busan 1339 EMIC, between January 1 and December 31, 2009. In connection with 378 pregnant women and 136 newborns who were required to transfer, retrospective analyses were made of the success rate of transfer (SR), the number of contacted hospitals, the time required for transfer and the reason of transfer and refusal. Results: In the case of pregnant women, the SR were 65.5%. They came in contact with 2.7 hospitals, and it took 24.4 minutes. As for the reason of transfer, preterm labor accounted for the highest proportion. In the case of newborns, the SR were 71.3%. They came in contact with 2.4 hospitals, and it took 15.6 minutes. The most common reason of transfer were respiratory symptoms. In the reason of refusal with pregnant women and newborn, the lack of medical staff, medical equipments and wards accounted for great. Conclusion: Many pregnant women and newborns have been transferred to hospitals by EMIC, but the SR has not been higher yet. Accordingly, there is a need to evaluate the propriety of perinatal treatment system, as well as to set up effective perinatal healthcare delivery system.

• Investigative Magnetic Resonance Imaging
• /
• v.14 no.1
• /
• pp.31-40
• /
• 2010

Purpose : To compare the relative values of various fast breath-hold imaging sequences for superparamagnetic iron-oxide (SPIO)-enhanced hepatic MRI for the assessment of solid focal lesions with a 3T MRI unit. Materials and Methods : 102 consecutive patients with one or more solid malignant hepatic lesions were evaluated by spoiled gradient echo (GRE) sequences with three different echo times (2.4 msec [GRE_2.4], 5.8 msec [GRE_5.8], and 10 msec [GRE_10]) for $T2^*$-weighted imaging in addition to T2-weighted turbo spin echo (TSE) sequence following intravenous SPIO injection. Image qualities of the hepatic contour, vascular landmarks and artifacts were rated by two independent readers using a four-point scale. For quantitative analysis, contrast-to-noise ratio (CNR) was measured in 170 solid focal lesions larger than 1 cm (107 hepatocellular carcinomas, nine cholangiocarcinomas and 54 metastases). Results : GRE_5.8 showed the highest mean points for hepatic contour, vascular anatomy and imaging artifact presence among all of the subjected sequences (p<0.001) and was comparable (p=0.414) with GRE_10 with regard to lesion conspicuity. The mean CNRs were significantly higher (p<0.001) in the following order: GRE_10 ($24.4{\pm}14.5$), GRE_5.8 ($14.8{\pm}9.4$), TSE ($9.7{\pm}6.3$), and GRE_2.4 ($7.9{\pm}6.4$). The mean CNRs of CCCs and metastases were higher than those of HCCs for all imaging sequences (p<0.05). Conclusion : Regarding overall performances, GRE using a moderate echo time of 5.8 msec can provide the most reliable data among the various fast breath-hold SPIO-enhanced hepatic MRI sequences at 3T unit despite the lower CNR of GRE_5.8 compared to that of GRE_10.

• Korean Security Journal
• /
• no.32
• /
• pp.65-93
• /
• 2012

The purpose of this study is to identify problems of private security guard playing an important role at the front of private security industry effectively by examining correlation between job stress and job satisfaction of private security guard and present proposals of effective operation of private security industry. Through data analysis according to study methods and procedures mentioned above, below conclusions were obtained. First, as results of analyzing correlation between job stress and work satisfaction of private security guard, one of subsidiary job satisfaction factors, it was found that lower stress to role complications and wage system relates to higher work satisfaction. Second, as results of analyzing correlation between job stress and superior satisfaction of private security guard, one of subsidiary job satisfaction factors, it was found that lower stress to wage system, responsibility, and role complications relates to higher superior satisfaction. Third, as results of analyzing correlation between job stress and equal opportunity satisfaction of private security guard, one of subsidiary job satisfaction factors, it was found that lower stress to wage system, responsibility, and role complications relates to higher equal opportunity satisfaction. Forth, as results of analyzing correlation between job stress and welfare satisfaction of private security guard, one of subsidiary job satisfaction factors, it was found that lower stress to wage system and role complications relates to higher welfare satisfaction. Fifth, as results of analyzing correlation between job stress and wage satisfaction of private security guard, one of subsidiary job satisfaction factors, it was found that lower stress to wage system and role complications relates to higher wage satisfaction. Sixth, as results of analyzing correlation between job stress and job pride, one of subsidiary job satisfaction factors, it was found that lower stress to wage system and role complications relates to higher job pride. Seventh, as results of analyzing correlation between job stress and co-worker satisfaction, one of subsidiary job satisfaction factors, it was found that lower stress to wage system and role complications relates to higher co-worker satisfaction.

• Geophysics and Geophysical Exploration
• /
• v.3 no.1
• /
• pp.1-6
• /
• 2000

The 1 $km^2$ area studied is located in Sukchun-ri, Hwasung-koon, the southern part of Kyeonggi-do. Even though this site has been known as a contaminated area caused by seawater intrusions, geophysical and geochemical surveys have never been carried out at the site to determine the extent of the seawater contamination and to investigate whether the seawater intrusion is in progress. The purpose of this study is to determine the extent of seawater contamination and a preferred channel of the seawater intrusion using geophysical methods such as DC resistivity surveys with Schlumberger array and a dipole-dipole array. In order to determine whether the seawater intrusion is in progress in the area, DC resistivity monitoring with Schlumberger array was performed. According to the resistivity map obtained from the inversion of the resistivity data measured with Schlumberger array, the study area is divided into two districts as relatively lowly resistive (less than 30 ohm-m) and highly resistive (more than 30 ohm-m) areas. The distribution of the lowly resistive area is consistent with the distribution of the layer composed of clay minerals, and the resistivity of this layer decreases slowly as approaching to the old seashore. Hydrogeological analysis shows that the clay layer within a distance of about 200 m from the seashore has been already contaminated by sea-water and its electric conductivity is 8 times higher than that of the sand layer covered by the clay layer. According to the results of the 2-dimensional DC resistivity surveys with a dipole-dipole array, there are two preferred channels of the seawater intrusion in the site, and both the channels are in the NW-SE direction from the old seashore. The lowly resistive zone in the southern channel extends to a depth of 80 m. The DC resistivity monitoring with Schlumberger array was carried out along the preferred channel which has the low resistivity Bone (fracture zone) that extended to a depth of 80 m. The time series of apparent resistivity, measured at a distance of 260 m from the old coast line, fluctuates with a period of 12 hours. From these observations, it can be concluded that the seawater intrusion caused by tidal action is still in progress along the fractured zone interpreted by the DC resistivity surveys with a dipole-dipole array.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.3 s.41
• /
• pp.61-79
• /
• 2006

The purpose of this research was to evaluate concretely how the 7th Technology Home Economics(HE) curriculum was operated In school fields by using context evaluation, input evaluation using the CIPP model focusing HE. In this research. a questionnaire survey was done targeting HE teachers in charge of technology and home economics subject for the 7th curriculum implementation at 250 randomly selected middle schools in Gpoungsangnamdo, and 109 returned questionnaire papers were used for the final analysis. The frequency, percent, mean and standard deviation of these data were obtained by using the SPSS 10.0 for Windows Program. The results of this research were outlined below: First, with a regard to the context evaluation (evaluating educational contexts), the requirement degree of seeking for career appeared to be the highest at the requirement survey of the education goal and character of HE area, and the requirement degree of elevating understanding home living' were very low. Interest and concern of students towards these subject as well as the self-confidence of HE teachers in charge were low. Second, as for the input evaluation (evaluating education plans), time allocation, content level, and content amount were not regarded to be not proper, and the composition of HE educational curriculums and the class guideline of teachers also were not so faithful from the aspect of school level. Among surveyed items, establishing plans in school level towards evaluation was relatively sincere, but discussions about curriculums were not so faithful, suggesting various kinds of content are not fully discussed. As shown by the results above, it is difficult to say that the operation of the 7th HE educational curriculums has secured its position perfectly. It is necessary to examine systematically the educational goals. character of the 7th HE educational curriculum and the appropriateness of curriculum content, and to seek various methods to elevate the self confidence of teachers and the interests of students. Because how to operate national level educational curriculums in school levels with self-regulation and elasticity will be an important variable in realizing educational goals, teachers, the main body of educational curriculums and direct performers, should establish and perform educational plans in school levels to elevated the satisfaction of teachers and educational effects for normally operating educational curriculums. In addition, educational curriculums should be operated and evaluated mainly by teachers at school fields to make it possible to confirm and check the achievement of the goals of educational curriculums qualitatively.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.211-221
• /
• 2006

Purpose The aims of this study were to evaluate micro-tensile bond strength of composite resin bonded to dentin following high-speed rotary handpiece preparation or Er:YAG laser preparation with two different adhesive systems and to assess the influence of different Er:YAG laser energies on the micro-tensile bond strength. Materials and Methods In this study, 40 third morlars were used. Flat dentin specimans were obtained and randomly assigned to eight groups. Dentin surfaces were prepared with one of four cutting types: carbide bur, Er:YAG laser (2 W, 3 W and 4 W) and conditioned with two bonding systems, Scotchbond Multipurpose Plus (SM), Clearfil SE bond (SE) and composite resin-build ups were created. After storage for 24 hours, each specimen was serially sectioned perpendicular to the bonded surface to produce more than thirty slabs in each group. Micro-tensile bond strength test was performed at a crosshead speed of 1.0 mm/min. Micro-tensile bond strengths (${\mu}TBS$) were expressed as means$\pm$SD. Data were submitted to statistical analysis using two-way ANOVA, one-way ANOVA, Student-Newman-Keuls' multiple comparison test and t-test. Results and Conclusion 1. Regardless of bonding systems, the ${\mu}TBS$ according to cutting types were from highest to lowest : 3 W, 2 W, Bur, and 4 W. In addition, there was no significant difference between Bur and 4 W (p<0.001). 2. Regardless of cutting types, SM showed significantly higher ${\mu}TBS$ than SE (p<0.001). 3. Bonding to dentin conditioned with SM resulted in higher ${\mu}TBS$ for 3 W compared to Bur, 2 W, and 4 W. There was no significant difference between 2 W and Bur (p<0.001). 4. Bonding to dentin conditioned with SE resulted in higher ${\mu}TBS$ for 3 W compared to 2 W, 4 W, and Bur. Bur exhibited significant lower ${\mu}TBS$ than all other cutting types. There were no significant differences between 3 W, 2 W and between 4 W and Bur (p<0.001). 5. The ${\mu}TBS$ of laser cutting groups were shown in order from highest to lowest: 3 W, 2 W and 4 W in two bonding systems. There was no significant difference between 2 W and 3 W in SE (p<0.001). : The ${\mu}TBS$ of composite resin bonded dentin was significantly affected by interaction between the cutting type and bonding system. In the range of 2 W-3 W, cavity preparation of the Er:YAG laser seems to supply good adhesion of composite resin restoration no less than bur preparation. In particular, if you want to use the self-etching system, including Clearfil SE bond for the purpose of a simplification of the bonding procedures and prevention of adverse effects by excessive etching, an Er:YAG laser may offer better adhesion than a bur.

• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.170-176
• /
• 2004

Objectives : In the unique metal iris method. the developing interfacial gap at the cavity floor resulting from the cavity wall property during polymerizing composite resin might affect the nominal shear bond strength values. The aim of this study is to evaluate that the iris method reduces the cohesive failure in the substrates and the cavity wall property effects on the shear bond strength tests using iris method. Materials and Methods : The occlusal dentin of 64 extracted human molars were randomly divided into 4 groups to simulate two different levels of cavity wall property (metal and dentin iris) and two different materials ($ONE-STEP^{\circledR}$ and $ALL-BOND^{\circledR}$ 2) for each wall property. After positioning the iris on the dentin surface. composite resin was packed and light-cured. After 24 hours the shear bond strength was measured at a crosshead speed of 0.5 mm/min. Fracture analysis was performed using a microscope and SEM. The data was analyzed statistically by a two-way ANOV A and t-test. Results : The shear bond strength with metal iris was significant higher than those with dentin iris (p＝0.034). Using $ONE-STEP^{\circledR}$, the shear bond strength with metal iris was significant higher than those with dentin iris (p＝0.005), but not in $ALL-BOND^{\circledR}$ 2 (p＝0.774). The incidence of cohesive failure was very lower than other shear bond strength tests that did not use iris method. Conclusions：The iris method may significantly reduce the cohesive failures in the substrates. According to the bonding agent systems. the shear bond strength was affected by the cavity wall property.

• Journal of Society of Preventive Korean Medicine
• /
• v.5 no.1
• /
• pp.41-56
• /
• 2001

Overview: The purpose of this study was to evaluate the determinants on the correlation between constitution and health promoting lifestyle profile on the workers. Also, the questionnaire on the HPLP (health promoting lifestyle profile) of Walker(1987) and Sa-sang constitution of Lee(l894) were utilized Methods: Data from a representative sample of 652 workers were analyzed Pearson's chi-square test analysis was utilized to test the explanatory causal model and to determine the direct and indirect effects of independent variables on quality of life. Results: Constitutional distribution among exposed group, were Tae-eum In(43.7%), So-eum In(33.6%), and So-yang In(22.7%). The degree of the subjects practicing health promoting lifestyle, on a scale of 1 to 4, is an average of 2.62, personal relations 2.94, self-realization 2.86, stress management 2.71, nutrition 2.68, responsibility for health 2.37, and exercise 2.21, with personal relations earning the highest points and exercise the lowest As for factors influencing health promoting lifestyle, there is significant difference between sex and age. That is female and higher age. On the difference between constitution and health promoting lifestyle, Tae-eum In is the highest all area except personal relations. So-eum In is the lowest all area except responsibility for health. Conclusions: Tae-eum In totally do health promoting lifestyle well but So-eum In relatively not. On the Study we used the HPLP(health promoting lifestyle profile) on the premise that each person's daily life, the attitude and the practice level to the health have an influence on the health. So in the constitution there is a little differences in the consideration and the practice level and health condition will be different. On this study we finish up by knowing about the health promoting lifestyle. But on next time we will have to go on studying about the sign and the comparison with the result of western and oriental medical health examination to the each constitution on carrying out continuously oriental medical health examination.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.4
• /
• pp.12-24
• /
• 2020

The purpose of this study is to analyze the influence of the water system on the location, spatial structure, and construction method of Hongju-eupseong, centering on Hongjumok-eupchi. During the Joseon Dynasty, the water system in Hongjumok-eupchi is composed of artificially constructed Seong-an Runnel and ponds based on a branch-shaped natural waterways flowing from south to north and west to east. Compiling the results of various literature records, excavations and analysis of map data, it can be seen that the water system has an important influence on the construction of Hongju-seong. Firstly, Hongju-seong from the Goryeo Dynasty to the late Joseon Dynasty is located using a circular shape of topographical structure and a small erosion basin formed on the inner side of the Hongseongcheon and Wolgyecheon streams without significant change in location. In particular, Wolgyecheon and Hongseongcheon are natural moats, which are harmonized with Sohyangcheon and riverside topographical structures, affecting the location and construction method of Hongju-seong, water related facilities, and the spatial structure of eupseong. It is understood that location characteristic of Hongju-seong reflects the urban location structure harmonized with waterways in ancient China and Korea. Secondly in harmony with the water system and topographic structure of Hongju-seong, it is an important factor in deciding the land use of the town, the arrangement of the town hall facilities and inducing various non-subsidiary measures such as the establishment of embankment forest with a secret function and the closure of the south gate. In addition, artificial drainage facilities such as Seongan runnel and ponds are being actively introduced from early on to protect the walls or towns from flooding of Wolgyecheon. Especially there were typical methods for protecting the walls from water damage such as the Joseon Dynasty stone castle structure that was integrated with saturn(soil wall) in the Goryeo Dynasty, retreating wall in the northern gate area in the late Joseon Dynasty, and the method of constructing wall using korean tile and stone floors between reinforced soil layers in the western and northern wall.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.2
• /
• pp.41-47
• /
• 2021

Purpose There are many cyclotrons compared to the land area of the Republic of Korea. Because GMP certification is required and the nuclear medicine test does not apply for insurance, the number of examinations for nuclear medicine is decreasing. Therefore, there is a high probability of early decommissioning of the cyclotron. However, we do not unusually perform the radioactivation evaluation on concrete that can be classified as radioactive waste during the decommissioning of the cyclotron. In this study, we aim to confirm the radioactivation in the concrete surface using Handheld Radionuclide Identification Devices (RIDs). Materials and Methods Because there is no cyclotron being decommissioning in the Republic of Korea, it was impossible to perform the coring of concrete for radioactivation analysis. In this study, we used the KIRAMS-13 and analyzed the concrete surface in the target direction in the cyclotron room. After setting the target direction as the center, radionuclides were measured for about five months at thirty points with vertical and horizontal intervals of 30 cm. We used the RIIDEye(Detector: NaI(Tl) detector, manufacturer: Thermo) in this study and set the measurement time per point to one day (24 hours). Results Co-60 and Cs-137 were detected in some measurement points, and we confirmed the radioactivity of Co-60 detected at the most points. As a result, we found that the radioactivity of Co-60 was high in the diagonal direction (from the lower-left direction to the upper right direction) based on the center of the target. However, we think it is impossible to apply the corresponding results to all cyclotrons because we performed the study using only one cyclotron. Conclusion In thirty measurement points, we could confirm the radioactive nuclides and the relative radioactivity using the results of portable nuclides analyzer. Therefore, we expect that we can use the portable nuclides analyzer to select the coring position of concrete during the decommissioning of the cyclotron. Also, if we secure the radioactivation data for several years, we expect to make a more accurate estimate of radioactive waste during the preparation period of decommissioning of the cyclotron.