• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.821-826
• /
• 2013

When the values of design variables change, mode switching can often occur. If the mode of interest is not tracked, the frequencies and modes for design optimization may be miscalculated owing to modes that differ from the intended ones. Thus, mode tracking must be employed to identify the frequencies and modes of interest whenever the values of design variables change during optimization. Furthermore, reliability-based design optimization (RBDO) must be performed for design problems with design variables containing uncertainty. In this research, we perform RBDO considering the mode tracking of a compressive coil spring, i.e., a component of the joint spring that supports a compressor, with design variables containing uncertainty by using only kriging metamodels based on multiple responses approach (MRA) without existing mode tracking methods. The reliability analyses for RBDO are employed using kriging metamodel-based Monte Carlo simulation.

• Proceedings of the Safety Management and Science Conference
• /
• 2006.11a
• /
• pp.415-426
• /
• 2006

Many technical and nontechnical issues hinder enterprise wide workflow management. The most significant technical issue is the inability to deal with the heterogeneity among users, workflow types, and WFMSs. Not all users demand the same workflow functionality, so user interfaces of different levels of sophistication are required. Because workflow types cannot always be fully predefined, they often need to be adjusted or extended during execution. Unlike relational database management systems, however, each WFMS often has differing workflow metamodels. This leads to incompatibility between WFMSs, making integration into an environment comprising many heterogeneous WFMSs a troublesome and sometimes impossible task. Current Workflow system consists mainly of Database system. It contains some problems like that the integration relationship among system processes cant be expressed properly. This research has been focused on two phases that should be considered in the Workflow system. First of all, the first phase is the analysis phase; one of its role is to figure out independent execution task unit(Workflow component). The second phase is design phase that provides with the framework to execute these task units actively. The Workflow component extraction method in the analysis phase uses a analysis method called C-C Net and, in the design phase, the architecture that makes the these Workflow component executed actively is provided. Through this research, each process is divided into a task unit and more effective Workflow system could be formed by executing these units actively. Current system layer calls task units, on the other hand, the Workflow system this research implemented provides with the architecture that places a layer between them that controls task units actively.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.8
• /
• pp.49-60
• /
• 2020

A fully coupled thermo-hydro-mechanical model is established to evaluate frost heave behaviour of saturated frost-susceptible soils. The method is based on mass conservation, energy conservation, and force equilibrium equations, which are fully coupled with each other. These equations consider various physical phenomena during one-dimensional soil freezing such as latent heat of phase change, thermal conductivity changes, pore water migration, and the accompanying mechanical deformation. Using the thermo-hydro-mechanical model, a sensitivity analysis study is conducted to examine the effects of the geotechnical parameters and external conditions on the amount of frost heave and frost heaving rate. According to the results of the sensitivity analysis, initial void ratio significantly affects each objective as an individual parameter, whereas soil particle thermal conductivity and temperature gradient affect frost heave behaviour to a greater degree when applied simultaneously. The factors considered in this study are the main factors affecting the frost heaving amount and rate, which may be used to determine the frostbite sensitivity of a new sample.

• Steel and Composite Structures
• /
• v.27 no.4
• /
• pp.427-438
• /
• 2018

In this paper, the single and multi-objective optimization of thin-walled conical tubes with different types of indentations under axial impact has been investigated using surrogate models called metamodels. The geometry of tapered thin-walled tubes has been studied in order to achieve maximum specific energy absorption (SEA) and minimum peak crushing force (PCF). The height, radius, thickness, tapered angle of the tube, and the radius of indentation have been considered as design variables. Based on the design of experiments (DOE) method, the generated sample points are computed using the explicit finite element code. Different surrogate models including Kriging, Feed Forward Neural Network (FNN), Radial Basis Neural Network (RNN), and Response Surface Modelling (RSM) comprised to evaluate the appropriation of such models. The comparison study between surrogate models and the exploration of indentation shapes have been provided. The obtained results show that the RNN method has the minimum mean squared error (MSE) in training points compared to the other methods. Meanwhile, optimization based on surrogate models with lower values of MSE does not provide optimum results. The RNN method demonstrates a lower crashworthiness performance (with a lower value of 125.7% for SEA and a higher value of 56.8% for PCF) in comparison to RSM with an error order of $10^{-3}$. The SEA values can be increased by 17.6% and PCF values can be decreased by 24.63% by different types of indentation. In a specific geometry, higher SEA and lower PCF require triangular and circular shapes of indentation, respectively.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.501-506
• /
• 2001

Computer modeling is essential to evaluate possible design of suspension for a railway vehicles. By creating a simulation, the engineers are able to assess the feasibility of a given design and change the design factors to get a better design. But if one wishes to perform complex analysis on the simulation, such as railway vehicle dynamic, the computational time can become overwhelming. Therefore, many researchers have turned to surrogate modeling. A surrogate model is essentially a regression performed on a data sampling of the simulation. In the most general sense, metamodels(surrogate model) take the form $y(x)=f(x)+{\varepsilon}$, where y(x) is the true simulation output, f(x) is the metamodel output, and $\varepsilon$ is the error between the two. In this paper, a second order polynomial equation is partially used as a metamodel to represent the forty-six dynamic performances for high speed train. The number of factors as design variables of the metamodel is twenty-nine, which are composed the dynamic characteristics of suspension. This metamodel is used to search the optimum values of suspension characteristics which minimize the dynamic responses for high speed train. This optimization is a multi-objective problem which have many design variables. This paper shows that the response surface model which is made through the design of analysis of computer experiments method is very efficient to solve this complex optimization problem.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.228-234
• /
• 2023

As the increasing demand for high-quality software, there is huge requiring for quality certification of international standards, industrial functional safety (IEC 61508), automotive (ISO 26262), embedded software guidelines for weapon systems, etc., in the industry. Software companies are very difficult to systematically acquire the quality certification in terms of cost and manpower of Startup, venture small-sized companies. For their companies one test case automatic generation is considered as a core technique to evaluate or improve software quality. This paper proposes a test case automatic generation method based on the design decision table for system and software design verification. We apply the proposed method with OMG's standard techniques of metamodel and model transformation for automatically generating test cases. To do this, we design the metamodels of design decision table (Model) and test case document (Text) and define model transformation to automatically generate test cases, which will expect to easily work MC/DC coverage.

• Journal of Internet Computing and Services
• /
• v.20 no.4
• /
• pp.63-72
• /
• 2019

As a sub-concept of corporate or organization governance, business governance and IT governance have become major research topics in academia. However, despite the importance of process as a construct for mediating the domain between business and information technology, research on process governance is relatively inadequate. Process Governance focuses on activities that link business strategy with IT system implementation and explains the creation of corporate core values. The researcher studied the basic conceptual governance models of political science, sociology, public administration, and classified governance styles into six categories. The researcher focused on the series of metamodels. For examples, the traditional Strategy Alignment Model(SAM) by Henderson and Venkatraman which is replaced by the neo-SAM model, organizational governance network model, sequential organization governance model, organization governance meta model, process governance CUBE model, COSO and process governance CUBE comparison model, and finally Process Governance Framework and etc. The Major difference between SAM and neo-SAM model is Process Governance domain inserted between Business Governance and IT Governance. Among several metamodels, Process Governance framework, the core conceptual model consists of four activity dimensions: strategic aligning, human empowering, competency enhancing, and autonomous organizing. The researcher designed five variables for each activity dimensions, totally twenty variables. Besides four activity dimensions, there are six driving forces for Process Governance cycle: De-normalizing power, micro-power, vitalizing power, self-organizing power, normalizing power and sense-making. With four activity dimensions and six driving powers, an organization can maintain the flexibility of process governance cycle to cope with internal and external environmental changes. This study aims to propose the Process Governance competency model and Process Governance variables. The situation of the industry is changing from the function-oriented organization management to the process-oriented perspective. Process Governance framework proposed by the researcher will be the contextual reference models for the further diffusion of the research on Process Governance domain and the operational definition for the development of Process Governance measurement tools in detail.