• 한국환경과학회지
• /
• 제6권1호
• /
• pp.61-67
• /
• 1997

미생물에 의한 흡착법으로 중금속을 효과적으로 제거, 회수할 수 있다. 알콜 발효 후 부산물로 생성되는 폐 Saccharomyces cerevisiae는 비교적 가격이 저렴하고, 중금속 생체흡착에 유용한 자원으로 이용될 수 있다. 생체흡착 실험에 사용된 미생물은 부유 및 alginate에 고정화된 S. cerevisiae로 수행하였다. 회분식 실험에서 생체흡착량은 Pb > Cu > Cd의 순으로 이루어졌다. Pb 이온의 흡착 평형은 Freundlich와 Langinuir 모델로 설명하였고, Freundlich 모델이 실험자 료와 잘 부합되었다 고정화된 S. cerevisiae를 이용한 혼합용액( Pb, Cu, Cr 및 Cd )흡착 실험에서 각 중금속들은 선택적 흡착 특성을 나타내었다. 고정화 미생물을 고정층 반응기에 충진하여 혼합 중금속 용액의 생체흡착 실험을 수행한 결과 Pb 이온이 가장 많이 흡착을 하였다. 고정화된 미생물에 흡착된 Pb의 탈착실험에서 0.1M의 HCI 및 $H_2SO_4$가 효과적이었다.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제1권2호
• /
• pp.157-166
• /
• 1997

The biosorption performances of copper were investigated by the immobilized biomass of nonliving marine brown algae Undaria pinnatifida by each of the Ca-alginate method(Ca-ALG), Ba-alginate method(Ba-ALG), polyethylene glycol method(PEG), and carrageenan method (CARR). The copper removal performance increased but the copper uptake decreased as the biomass amount was increased. However, the copper uptake by the immobilized biomass increased with increasing initial copper concentration. Among the immobilization methods, the copper uptake decreased in the following sequence: Ca-ALG > Ba-ALG > PEG > CARR. The pattern of copper uptake by the immobilized biomass fitted the Langmuir isotherm better than the Freundlich isotherm. Desorption of deposited copper with 0.05 ~0.5M HCI, resulted in no changes of the copper uptake capacity of the immobilized biomass by the immobilization methods except for PEG, through five subsequent biosorption/desorption cycles. There was no damage to the immobilized biomass which retained its macroscopic appearance in repeated copper uptake/elution cycles.

• 한국수소및신에너지학회논문집
• /
• 제16권4호
• /
• pp.386-390
• /
• 2005

Al film(135.5 nm thick) with Pd film(39.6 nm thick) on the top of it was made by thermal evaporation method. Electrical resistance change due to hydrogen absorption and desorption was measured by four point measurement method. The sample was activated by hydrogen absorption and desorption cycling at room temp. Hydrogen was introduced into the film by increasing hydrogen gas pressure step by step up to 640 torr at room temp. The resistance change ratio was decreased to 12 % with increasing hydrogen pressure in contrast to normal metal behavior. This strange tendency was not understood yet. Further study is needed to find out the mechanism of hydrogen absorption in Al in Al/Pd film.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.312-315
• /
• 2018

Although the reversibility of 10,12-pentacosadiynoic amino meta-acid(PCDA-mBzA) against temperature and pH was reported, the modulation of reversibility by ion adsorption at terminal functional group has not been investigated. In this work, we developed a simple method for modulating the reversibility of PCDA-mBzA films upon a thermal stimulus by cadmium ion adsorption inducing the breakage of the outer hydrogen bonding of two hydrogen bonds, which are responsible for the reversible properties of PCDA-mBzA. External reflection-Fourier transform infrared (ER-FTIR) analyses revealed that the hydrogen bonding between the carboxylic acid groups was broken through ion adsorption and only a single hydrogen bond between the amide groups remained in the PCDA-mBzA polymer. In addition, PCDA-mBzA films could recover their original property through cadmium ion desorption. These results present that the transition between reversibility and irreversibility can be modulated artificially simply through the adsorption and desorption of metal ions.

• Advances in environmental research
• /
• 제5권1호
• /
• pp.1-18
• /
• 2016

Magnetic nano-based sorbents have been synthesized for the recovery of two rare earth elements (REE: Nd(III) and Yb(III)). The magnetic nano-based particles are synthesized by a one-pot hydrothermal procedure involving co-precipitation under thermal conditions of Fe(III) and Fe(II) salts in the presence of chitosan. The composite magnetic/chitosan material is crosslinked with epichlorohydrin and modified by grafting alanine and serine amine-acids. These materials are tested for the binding of Nd(III) (light REE) and Yb(III) (heavy REE) through the study of pH effect, sorption isotherms, uptake kinetics, metal desorption and sorbent recycling. Sorption isotherms are well fitted by the Langmuir equation: the maximum sorption capacities range between 9 and 18 mg REE $g^{-1}$ (at pH 5). The sorption mechanism is endothermic (positive value of ${\Delta}H^{\circ}$) and contributes to increase the randomness of the system (positive value of ${\Delta}S^{\circ}$). The fast uptake kinetics can be described by the pseudo-second order rate equation: the equilibrium is reached within 4 hours of contact. The sub-micron size of sorbent particles strongly reduces the contribution of resistance to intraparticle diffusion in the control of uptake kinetics. Metal desorption using acidified thiourea solutions allows maintaining sorption efficiency for at least four successive cycles with limited loss in sorption capacity.

• 센서학회지
• /
• 제32권3호
• /
• pp.147-153
• /
• 2023

Metal-organic frameworks (MOFs) of cobalt gallate were synthesized and deposited on gold electrodes using self-assembly monolayers (SAMs) and hydrothermal processing. These MOF films exhibit strong adsorption capabilities for gaseous particulates, and the use of SAMs allows the synthesis and deposition processes to be completed in a single step. When cobalt gallate is mixed with SAMs, a coordination bond is formed between the cobalt ion and the carboxylate or hydroxyl groups of the SAMs, particularly under hydrothermal conditions. Additionally, the quartz crystal microbalance (QCM) gas sensor accurately measures the number of particulates adsorbed on the MOF films in real-time. Thus, the QCM gas sensor is a valuable tool for quantitatively measuring gases, such as SO₂, NO₂, and CO₂. Furthermore, the QCM MOF film gas sensor was more effective for gas adsorption than the MOF particles alone and allowed the accurate modeling of gas adsorption. Moreover, the QCM MOF films accurately detect the adsorption-desorption mechanisms of SO₂ and NO₂, which exist as gaseous particulate matter, at specific gas concentrations.

• 분석과학
• /
• 제10권4호
• /
• pp.282-290
• /
• 1997

XAD-16-[4-(2-thiazolylao)]orcinol (TAO)형 킬레이트 수지에 대한 U(VI), Tb(IV), Zr(IV), Cu(II), Pb(II), Ni(II), Zd(II), Cd(II) 및 Mn(II) 이온의 흡착 및 탈착 특성을 용리법으로 조사하였다. 각 금속이온의 총괄용량과 pH 변화에 따르는 혼합 금속이온의 분리능 및 금속이온의 최적 흡착 조건을 조사하기 위하여 금속이온의 흡착에 미치는 흐름속도, 완충용액의 농도에 대한 영향을 검토하였다. 킬레이트 수지에 의한 금속이온의 총괄 흡착 용량은 각각 0.35nmol U(VI)/g resin, 0.49nmol Th(VI)/g resin, 0.41nmol Cu(II)/g resin 및 0.31nmol Zr(IV)/g resin이었다. 그리고 pH 5.0에서 돌파점 용량과 총괄 용량으로부터 얻은 금속이온의 용리순서는 Th(IV)>Cu(II)>U(VI)>Zr(IV)>Pb(II)>Ni(II)>Zn(II)>Mn(II)>Cd(II)이었다. 흐름속도 0.28mL/min 및 pH 2~5범위에서 혼합 금속이온을 분리한 결과 pH가 증가함에 따라 이들 이온의 군분리가 가능하였다. 한편, $HNO_3$, HCl, $HClO_4$, $H_2SO_4$ 및 $Na_2CO_3$ 등의 탈착제에 의한 탈착특성을 조사한 결과 2M $HNO_3$는 Zr(IV)을 제외한 대부분의 금속이온들은에 대하여 높은 탈착효율을 나타냈으며, 1M $H_2SO_4$ 용액을 사용하면 Zr(IV)의 탈착 및 회수가 가능하였다. 또한 킬레이트 수지를 이용하여 미량의 U(VI) 이온이 함유된 인공 해수 시료를 용리시키고 회수한 결과 94%이상의 높은 회수율을 나타내었다. 아울러 XAD-16-TAO 킬레이트 수지는 희토류 금속의 혼합시료를 2M $HNO_3$ 용액으로 용리시키면 U(VI)의 선택적인 분리, 농축 및 회수에 유용함을 알 수 있었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권3호
• /
• pp.23-28
• /
• 2007

동전기적 처리에 의한 무기 오염 물질의 이동 및 제거율을 조사하기 위해 일련의 흡착/탈착 실험 및 동전기 정화 실험을 실시하였다. 동전기적 효과로 인해 발생된 양극 부근에서의 탈착 현상 및 음극 부근에서의 침전 현상을 중금속으로 오염된 점토 시료의 흡착 및 탈착 특성과 비교하여 분석하였다. 제거 효율은 300 V/m의 전압구배로 약 4시간의 동전기적 처리 결과 80% 정도의 높은 제거 효율을 확인할 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.22-28
• /
• 2016

It is necessary to store and supply hydrogen isotopes for Tokamak operation. A storage and delivery system (SDS) is used for storing hydrogen isotopes as a metal hydride form. We designed and fabricated a depleted uranium (DU) bed to store hydrogen isotopes. The rapid storage of hydrogen isotopes is very important not only for safety reasons but also for the economic design and operation of the SDS. The delivery rate at the desorption temperatures without the operation of a dry pump was analyzed in comparison with that with the operation of the dry pump. The effect of the initial desorption temperatures on the dehydriding of the DU without the operation of the dry pump was measured. The effect of the initial desorption temperatures on the dehydriding of DU with the operation of the dry pump was also measured and analyzed. The primary pressure on the desorption temperatures without the operation of the dry pump was analyzed in comparison with that with the operation of the dry pump. The temperature gradient of the coil heater and the primary vessel was also analyzed. Our results will be used to develop pilot scale hydrogen isotope processes. It was confirmed that dehydriding of a medium-scale DU bed has enabled without the operation of the dry pump.

• 한국수소및신에너지학회논문집
• /
• 제24권4호
• /
• pp.295-301
• /
• 2013

Long-term global energy-demand growth is expected to increase driven by strong energy-demand growth from developing countries. Fusion power offers the prospect of an almost inexhaustible source of energy for future generations, even though it also presents so far insurmountable scientific and engineering challenges. One of the challenges is safe handling of hydrogen isotopes. Metal hydrides such as depleted uranium hydride or ZrCo hydride are used as a storage medium for hydrogen isotopes reversibly. The metal hydrides bind with hydrogen very strongly. In this paper, we carried out a modeling and simulation work for absorption/desorption of hydrogen by ZrCo in a horizontal annulus cylinder bed. A comprehensive mathematical description of a metal hydride hydrogen storage vessel was developed. This model was calibrated against experimental data obtained from our experimental system containing ZrCo metal hydride. The model was capable of predicting the performance of the bed for not only both the storage and delivery processes but also heat transfer operations. This model should thus be very useful for the design and development of the next generation of metal hydride hydrogen isotope storage systems.