• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.3
• /
• pp.301-308
• /
• 2007

Silicate mineral serpentine with magnesium and calcium was selected as a mineral carbonation mediators for carbon dioxide storage. Serpentine has various metallic elements as an oxides form of magnesium, iron, calcium, aluminium etc. Magnesium and calcium could be carbonation salt preferentially than other metal component within serpentine. Systemic thermochemical treatment for serpentine could change physicochemical properties like a surface area and pore dimensions. Due to the rapid chemical reaction rate depended on dimensional values, carbonation formation could determined by surface property change of thermochemical treated serpentine.

• Animal cells and systems
• /
• v.7 no.3
• /
• pp.173-186
• /
• 2003

The transition metal cadmium is a serious occupational and environmental toxin. To inhibit cadmium-induced damage, cells respond by increasing the expression of genes that encode stress-responsive proteins. The metal-regulatory transcription factor 1 (MTF-1) is a key regulator of heavy-metal induced transcription of metallothionein-I and II and other genes in mammals and other metazoans. Transcriptional activation of genes by MTF-1 is mediated through binding to metal-responsive elements in the target gene promoters. Phosphorylation of MTF-1 plays a critical role in the cadmium-inducible transcriptional activation of metallothionein and other responses. Studies using inhibitors indicate that multiple kinases and signal transduction cascades, including those mediated by protein kinase C, tyrosine kinase and casein kinase II, are essential for cadmium-mediated transcriptional activation. In addition, calcium signaling is also involved in regulating metal-activated transcription. In several species, cadmium induces heat shock genes. Recently much progress has been made in elucidating the cellular machinery that regulates this metal-inducible gene expression. This review summarizes these recent advances in understanding the role of some known cadmium-responsive genes and the molecular mechanisms that activate metal-responsive transcription factor, MTF-1.

• Journal of Environmental Health Sciences
• /
• v.22 no.3
• /
• pp.81-87
• /
• 1996

The purpose of this research is to examine the utilization of oyster shells for neutralization and removal of heavy metal ions in plating wastewater, because oyster shells have been known to be very porous, to have high specific surface area and to have alkaline minerals such as calcium and magnesium. The results obtianed from this research showed that oyster shells had a buffer capacity to neutralize an acidic.alkali system in plating wastewater. Generally, it could be showed that the removal efficiencies of heavy metal ions were very influenced by reaction times and oyster shell dosages. In point of ocean waste, if oyster shells substituted for a valuable adsorbent such as actviated carbon, they could look forward to an expected economical effect.

• Journal of Environmental Science International
• /
• v.10 no.4
• /
• pp.299-304
• /
• 2001

For the remediation of the contaminated soil with heavy metals, Cd, Cr, Cu, and Pb, the reaction parameters were optimized. Tartaric acid (TA) and oxalic acid(OA) as a washing agent and recovery of metals, The optimum washing conditions of TA and OA were in the ratio of 1 : 20 between soil and acid solution during 2hr reaction under unbuffered pH solutions. At the optimized reaction conditions, the removal efficiencies were compared with that of 0.1 M HCl and ethylenediamine tetraacetic acid(EDTA). TA showed higher efficiency on the removal of Pb than that of EDTA, which established for the remediation of contaminated soil with Pb and Cd metals. The recovery of metal ions from washing solution was achieved by adding calcium hydroxide and sodium sulfide by forming the precipitation of metal hydroxide and metal slfied. Optimum amounts of sodium sulgide and calcium hydroxide were Cd = 25g/$\ell$, Cu = 5~10g/$\ell$ and Pb = 5~10g/$\ell$ for the washing solution of OA and 2~5g/$\ell$ for the washing solution of TA, respectively. The amounts of $Na_2S$ and $CA(OH)_2$ for the tartaric acid was less than that of oxalic acid.

• Korean Journal of Materials Research
• /
• v.19 no.5
• /
• pp.270-275
• /
• 2009

Lotus-type porous nickel with cylindrical pores was fabricated by unidirectional solidification under an Ar gas atmosphere using the thermal decomposition method of the compounds such as sodium hydroxide, calcium hydroxide, calcium carbonate, and titanium hydride. The decomposed gas does form the pores in liquid nickel, and then, the pores become the cylindrical pores during unidirectional solidification. The decomposed particles from the compounds do play a rule on nucleation sites of the pores. The behavior of pore growth was controlled by atmosphere pressure, which can be explained by Boyle's law. The porosity and pore size decreased with increasing Ar gas pressure when the pores contain hydrogen gas decomposed from calcium and sodium hydroxide and titanium hydride, ; however it they did not change when the pores contain containing carbon dioxide decomposed from calcium carbonate. These results indicate that nickel does not have the solubility of carbon dioxide. Lotus-type porous metals can be easily fabricated by the thermal decomposition method, which is superior to the conventional fabrication method used to pressurized gas atmospheres.

• Resources Recycling
• /
• v.13 no.2
• /
• pp.33-38
• /
• 2004

Concepts and experimental results for the unique utilization process which we could obtain the high purity calcium nitrate from blast furnace slag in the steel industry are described. Firstly we reacted the blast slag with nitric acid and separatively removed the insoluble silica by filtration. We adjust the pH of filtrate to 6∼8 with calcined lime, and then precipiated out the metal components like Fe, Al, Mg in the forms of hydroxides. Consequently concentration of the mother liquor and crystallization processes make us obtain the high purity (>98 wt%) calcium nitrate tetrahydrates, which is expected the valuable fertilizers.

• Journal of the Korean Chemical Society
• /
• v.37 no.3
• /
• pp.302-308
• /
• 1993

Monolayers of calcium palmitate were deposited on a piezoelectric quartz crystal plate by the Langmuir-Blodgett(LB) technique, and it was found from frequency changes of the quartz crystal deposited LB films. The usual carbonyl absorbance at 1704 cm$^{-1}C$ was replaced by the split band in the 1540~1590 cm$^{-1}C$. The two absorptions at 1580 cm$^{-1}C$ and 1540 cm$^{-1}C$ were assigned to the antisymmetric stretching vibration of the calcium carboxylate group and the hydrated species due to the lowering carbonyl stretching frequency by hydrogen bonding$^1$ respectively. Besides, it was demonstrated by X-ray diffraction analysis. The swelling behaviour of LB films in water phase at 23$^{\circ}C$ was observed from the frequency change of the LB films deposited quartz crystal with time. Calcium palmitate LB films has been found to swell substantially in water without flaking, whereas hexadecanol LB films hardly swelled in water. Amount of swelling of calcium palmitate LB films was equivalent to 47 wt.${\%}$ of the dry LB films, which means that ca. 7 water molecules were incorporated per calcium palmitate amphiphile. Chemical structure of calcium palmitate LB film was estimated as [CH$_3$(CH$_2$)$_{14}$COO]$_2$Ca${\cdot}$XH$_2$O, and the hydration number was 1.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.593-610
• /
• 1996

The objective of this paper was to evaluate the shear bond strength of luting glass ionomer cement with defferent calcium based solution treatment on dentin surface. 120 extracted human teeth were classified into 12 group based on presence of smear layer on dentin surface and type of treatment solution. Smear layer remove on dentin surface was done using 6% citric acid for 60 seconds. Five different dentin surface treatment solutions(calcium acetate, calcium carbonate, clacium chlorided, calcium hydroxide, and calcium phosphate) were evaluated in this study. After surface modification, metal ring(inner diameter : 3mm, depth : 1mm) was placed to expose the same dentin surface area and inner space was filled with luting glass ionomer cement according to the recommended procedure for stadard clinical procedure. The shear bond strength of glass ionomer cement was determined after 24 hours. SEM was used for the evaluation of the surface morphologic changes and EDAX analysis was done for determination of the change of the calcium contents of treated dentin. Follwing conclusion can be drawn : 1. In the group of the dentin surface with smear layer, the calcium carbonate solution was the most effective for the increase of the clacium content and the shear bond strength of glass ionomer cement to dentin surfaces. 2. In the group of the calcium carbonate treated dentin with msear layer, the shear bond strength was increased twice compared to the control group and cohesive failure mode was observed. 3. The shear bond strength of cement was increased significantly be the removal of smear layer using 6% citric aicd. However, additional calcium solution treatments were not effective for further bond strength increase. 4. The shear bond strength of cement was significantly improved by both of the removal of smear layer and the calcium solution treatment, and the former was more effective for bond strength improvement. 5. The smear layer removed/calcium solution treated groups showed dentinal tubule obstruction and crystal attachment in SEM evaluation. However, the shear bond strengths of these groups were not increased compared to the smear layer removed/no dentin treatment group.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.478-482
• /
• 2001

This study was conducted to get a knowledge on food components of cuttle bone (CB) as a food resource. The yields and ash contents of CB were about $7.5\%$ on whole cuttle fish and about $90\%$ on dry basis, respectively, The contents of heavy metal might not invoke health risk in using food resource, The major mineral of CB was calcium as about $22\%$ in content. The yields, proximate compositions, heavy metal and mineral contents were not significantly different between domestic and imported CB. Judging from X-ray diffraction pattern, most of calcium in CB was present as a form of calcium carbonate (CC), and scanning electron micrograph showed irregular form. Buffering capacity of CB showed strongly at pH 7, and its pattern was the same as shown in that of CC, And CB solution showed a very high degree in turbidity comparing to that of CC solution. The solubility of CB was superior to that of CC, but inferior to those of calcium powders on the market, It was concluded from above results that CB could be effectively utilized as a calcium source.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.665-675
• /
• 2010

The effects of chemical binders (ladle slag, ordinary portland cement (OPC), hydroxyapatite and calcium hydroxide) on the solidification/stabilization of heavy metals (Cd, Cu, Ni, Pb, Zn) in sewage sludge were evaluated by chemical leaching tests such as EDTA extraction, TCLP and sequential extraction. The results of EDTA extraction showed that heavy metal concentrations in sewage sludge were highly reduced after solidification/stabilization with slag, cement or calcium hydroxide. However, EDTA interrupted solidification/stabilization of heavy metals by hydroxyapatite. The TCLP-extracted heavy metal concentrations in sewage sludge after solidification/stabilization with chemical amendments were highly reduced. However, Cu concentration in the sewage sludge solidified/stabilized with slag, cement or calcium hydroxide increased because the pH of TCLP solution was higher than 7. Mixtures of sludge 1 : slag 0.2 : calcium hydroxide 0.1 (wt ratio) showed the least leachability in batch TCLP and EDTA extraction. The results of sequential extraction (SM&T, formaly BCR) indicated that the distribution of heavy metals changed from exchangable and carbonate fractions to strongly bound organic fraction. It was found that maximum leachate concentrations of Ba, Cd, Cr and Pb from sewage sludge amended with slag and calcium hydroxide were far below US EPA TCLP regulations.