• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.4
• /
• pp.86-94
• /
• 2012

VANETs can provide traffic warring service to help drivers drive safely based on the information of the traffic condition. The driver can drive safely through the warning service information provided by the VANET and know the traffic condition exactly more than through only the sight of driver. In this paper we suggest a new mechanism of updating the table to broadcast the message more rapidly based on the table driven method as the way of sending the emergency message in the VANETs. When updating the table, nodes sends only based on the message transmission success rate. In the result of simulation we could find that the suggested mechanism would reduce the delay time of the emergency message broadcast compared to the existing mechanism.

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.319-324
• /
• 2012

Vehicle safety communications is one among the important technologies in order to protect a car accident. For this, many protocols forwarding a safe message have studied to protect a chain-reaction collision when a car accident occurs. most of these protocols assume that the time of generating a safe message is the same as an accident's. If a node predicts some traffic hazard and forwards a safe message, a driver can response some action quickly. So, In this paper, we proposes a traffic hazard prediction algorithm using the communication technique. As a result, we show that the frame reception success rate of using our algorithm to the previous protocol improved about 4~5%.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.190-201
• /
• 2021

The variable message sign (VMS) is equipment to improve the efficiency of traffic flow and safety of travel by providing real-time information to road users on traffic, road, weather situation, and traffic control due to construction. The information messages of the letter-based VMS taking up most of the VMS on the general national highways consist of section, travel time in sections, and road control situation. This study devised an improvement plan centered on road users, not road managers-centered existing message-based VMS through an analysis of road users' preference targeting the letter-based VMS operated in the general national highways in the Seoul Metropolitan Area. By presenting the measure for system improvement through which information on unexpected situations that road users prefer the most can be quickly and efficiently provided, this study aims to improve the efficiency of road user-centered VMS traffic information.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.91-102
• /
• 1999

The objective of this study is to evaluate traffic management strategies using Variable Message Signs(MCS) on urban freeways. It is well known that real-time information on traffic conditions increases driver's comfort, and reduces the risks of accidents if drivers are aware of the traffic situation in advance, they decide whether to divert from the freeway or continue on the planned route. The experimental data collected on the Olympic highway we have shown the following results : 1. when the information on both the congested freeway and uncontested diversion route is displayed on the variable message sign. an additional 1.7 percent of traffic diverted, which results in a 3.7 percent reduction in total travel time. 2 Compared with one Proposed VMS message of 'reduce the speed', the other Proposed VMS message of 'keep speed 70km/h' is found to be much more effective in reducing mean speed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.1
• /
• pp.13-27
• /
• 2012

According to the development of Intelligent Transportation System technology, VMS(Variable Message Signs) are operating on highway. But, VMS display information which don't reflect traffic condition and driver's human factor. So driver can't read VMS message during limited time, it makes to reduce VMS's reliability. This paper presents a model for VMS message reading time and distance considering traffic condition and human factor. We built driving simulator by Winroad package which is able to copy real driving condition. Subjects were comprised of 20 people who reflect domestic driver's condition such as sex. We did regression analysis with experiment results and draw the model. The model could be possible to develop message- set considering traffic condition and human factor.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.11a
• /
• pp.87-93
• /
• 2003

This paper reviews existing message-filtering schemes and presents a quantization-based message-filtering approach which reduces state update transmission and message traffic requirement. For a realization of the approach we develop a DEVS-based integrator which provides behavior and characteristic of the quantization-based approach. We take a spaceship and space traveling system as a case study to evaluate performance of the quantization-based approach. The approach is validated by DEVSJAVA simulations of the case study. The comparison of message traffic requirement between DTSS (Discrete Time System Specification)-based and DEVS-based systems apparently shows system performance improvement through the quantization-based approach.

• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.47-56
• /
• 2015

PURPOSES: The purpose of this study is to estimate the impact of variable message signage (VMS) on traffic safety as a function of road curve radius using statistical methods. METHODS: In order to analyze the impact of VMS installations on traffic safety, travel speed, lateral distance, and geometric data relating to road curvature in each study area was acquired and analyzed for the impact of providing VMS information on driver performance and traffic safety using statistical methods including student t-test, Mann-Whitney test, and the Anderson-Darling test for estimating traffic safety hazard zone in each lane. RESULTS: As a result of analyzing driver performance characteristics before and after providing VMS information, it was determined that by providing VMS information, mean travel speed is deceased and vehicles are driven with increased precision, following the centerline in the first and second lanes. Also the results of analyzing traffic safety impacts of VMS indicate that traffic safety performance factors in the first lane of the Gapyeong section can, on average, increase in the left and right side of the lane by 19.22% and 68.98%, respectively, and in the case of the second lane, safety impacts, on average, can increase in both sides by 100%. For the Hongcheon section, traffic safety impacts in the first lane, on average, can increase along the left and right sides of the lane by 32.31% and 47.18%, and within the second lane, traffic safety can be increased along the left and right side of the lane by 10.97% and -0.01%, respectively. CONCLUSIONS: Based on the results of this study, the impact on traffic safety obtained by providing VMS information for road sections with smaller curve radii is greater than can be obtained for road sections with larger curve radii.

• Journal of the Korea Computer Industry Society
• /
• v.9 no.3
• /
• pp.121-128
• /
• 2008

This paper suggested a location-based traffic information service system using TPEG and GIS. Measurement technique, location server, applied service technique, and linkage technique with database were used to provide the location-based traffic information service. In particular, TPEG-RTM includes location information and load traffic message. The location information to be included in each message displayed a specific point, section or region limit of the load. Actually, because it was impossible to receive data using TPEG receiver, a proposed program included in this paper was used to produce an arbitrary database and read it, Also, TPEG event happened time was indicated on the map for matching test of a TPEG message and WGS84 coordinate, and finally it was verified with art example of a vehicle approaching to an event happened place.

• Journal of KIISE
• /
• v.42 no.3
• /
• pp.408-412
• /
• 2015

In base station based networks, traffic overload at the base station is inevitable. Peer-to-peer DTN which disperses the traffic overhead to each node can relieve the traffic overload at the base station. To increase the message delivery ratio and reduce the message overhead, we present novel routing using mobility information which can be obtained from each node, unlike the existing flooding based routings. In the proposed routing scheme, the routing decision metric, which is defined based on the node mobility information, is computed by using the expected distance between each node to the destination. The message is copied to other nodes that have lower expected distance to the destination than the value for the node willing to copy the message. We conducted simulations by using both a random mobility model and a real mobility trace to compare the performance of the proposed routing scheme to the existing routing scheme that does not utilize the mobility information. The performance evaluation showed the proposed routing successfully delivers messages with 10% to 30% less copies compared to previously proposed routing schemes.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.25-36
• /
• 2009

Everyday congestion length (distance) and duration (time) data are collected and recorded in Expressway Traffic Information Center. These records are based on the information that the operators watch CCTV and decide traffic condition in order to present information about congestion on VMS. Using VMS message has some merits like that it doesn't need a great lot of cost to construct hardware such like FTMS because operators can check traffic condition by watching CCTV only. Of cause in the aspect of accuracy, using VMS message has the limitation that it is based on subject decision compared with FTMS. However, it can be said that the value of using VMS message is very large. The object of this study is to use the VMS information record (log file) usefully to provide information of traffic condition on expressway for users (drivers) without keeping the VMS information record in dead storage. To do so, in this research, congestion calculation method able to understand traffic congestion condition on expressway was developed.