• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.684-690
• /
• 2010

Recently, the NG(Next Generation) system is studied for supporting convergence of various services and multi mode of single terminal. And a demand of user for taking the various services is getting increased, for supporting these services, many systems being able to transmit a large message have been appeared. In the NG system, it has to be supporting the CDMA and WCDMA besides the tele communication systems using OFDM method with single terminal An intergrated system can be improved with adopting of SoC technique. For adopting SoC technique on the intergrated terminal, we have to solve the non linear problem of HPA(High Power Amplifier). Nonlinear characteristic of HPA distorts both amplitude and phase of transmit signal, this distortion cause deep adjacent channel interference. We adopt a polynomial pre-distortion technique for this problem. In this paper, a noble modem design for NG mobile communication service and a method using polynomial pre-distorter with PAPR technique for counterbalancing nonlinear characteristic of the HPA are proposed.

• Journal of Broadcast Engineering
• /
• v.25 no.1
• /
• pp.25-35
• /
• 2020

Recently, the development of image processing technology, as well as hardware performance, has been continuing the research on 3D point processing technology that provides users with free viewing angle and stereoscopic effect in various fields. Point cloud technology, which is a type of representation of 3D point, has attracted attention in various fields because it can acquired/expressed point precisely. However, since Hundreds of thousands, millions of point are required to represent one 3D point cloud content, there is a disadvantage that a larger amount of storage space is required than a conventional 2D content. For this reason, the MPEG (Moving Picture Experts Group), an international standardization organization, is continuing to research how to efficiently compress, store, and transmit 3D point cloud content to users. In this paper, a V-PCC bitstream generated by a V-PCC (Video-based Point Cloud Compression) encoder proposed by the MPEG-I (Immersive) group is composed of an MPU (Media Processing Unit) defined by the MMT. In addition, by extending the signaling message defined in the MMT standard, a parameter for a segmented transmission method of the 3D point cloud content by area and quality parameters considering the characteristic of the 3D point cloud content, so that the quality parameters can be selectively determined according to the user's request. Finally, in this paper, we verify the result through design/implementation of the verification platform based on the proposed technology.

• Journal of Distribution Science
• /
• v.14 no.6
• /
• pp.89-98
• /
• 2016

Purpose - This article tackles risk communication issues and aims to address the characteristics of MERS risk information distribution in South Korea, and secondly to examine the communicative behavior of the public health authority in terms of the quality of communication strategies. Thirdly, the study attempts to figure out the risk communication to cope with MERS through the applications of SMCRE model in chronological order. We employ the social amplification of risk framework for analyzing the emergent public response as one of the main approaches. Research Design, Data and Methodology - The main framework of this study is theoretically based on the social amplification of risk, which describes signals about risk transmitted and processed by individuals and social groups. The model also reflects the interactions between social groups and institutes about disaster-related risk issues, which are potential amplifiers or attenuators of communication signals. S-M-C-R-E Model is methodologically employed to examine the social amplification for MERS risk information in each period, which we defined operationally. The proposed methodology allows the assessment of effectiveness and ineffectiveness on risk communication to be conceptualized as a countermeasure against disasters. The paper focuses on exploring how social risk amplification can be applied and organized in each stage. Results - The SMCRE model describes the exchange of risk information and is also applied to all forms of communication between stakeholders including public health authority, local government and media. Each factor of risk communication includes source, message, channel, receiver and effect. The results support that the effective risk communication involves not only the improved reliability of public health authority as a key factor of risk communication, but also a close cooperation and good collaboration with local governments. It does not seem to be possible that the government-initiated risk communication based on controllability and management cope effectively with infectious disease in early stage. The results of this study imply that the shared risks between local, regional and national authorities can enhance risk communication system. Conclusions - The study supports that the disparities in how disaster-related risk information is interpreted and coded, have made effective risk communication and public sense-making impeded. Our findings support a more communicative discussion about the role of risk information sharing between governments for the improvement of emergency management and underline the importance of social elements in the risk communication, such as relationship and trust building. Findings suggest that trust building between stakeholders could be added to help explain the processes of social amplification and attenuation of risk. It would be recommended that the continuous risk communication with all the involved stakeholders will be able to help national health promotion policy to be improved regarding emergency management. Furthermore, risk communication has to be a scientific approach for the communication pertaining to potentially sensitive or controversial situations with public concerns and low public trust.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.6
• /
• pp.969-978
• /
• 2016

Objectives: The purpose of the study was to examine the expected role and competency of future public health dental hygienist. Methods: This study was cross-sectional design. One dental hygienist per 16 cities and provinces was selected from the list of Korea Society of public dental hygienists. After signing in the informed consent, the interview was carried out. Transcripts were made after each interview. Six researchers recorded meaningful contents in the transcripts. They classified and integrated the information that they had recorded commonly or not. Their opinions were converged by conference. Two supervisors verified results whether they were derived from actual recordings for the reliability of the results. The records were confirmed once again and corrected into common message. Results: The main difficult subjects in public health official examination were public health, English, and medical legislation to pass the examine. The preliminary certificates included public health related certificate, computer certificate, and driver's license. In the personality aspect, creativity, activeness, cooperation and good responsibility were very important trait to public health official. Among 16 interviews, 9 were positive and 5 were negative about the future prospects of a public dental hygienist. Conclusions: The future of public health dental hygienist will be positive. Throughout effort to prepare for the public health official, the public health dental hygienist will be expanded and in many ways the dental hygienists will take the charge of the important parts of the public health administration in the near future.

• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.199-208
• /
• 2008

Lately, since Complementary Metal Oxide Semiconductor(CMOS) image sensor system has low power, low cost and been miniaturized, hardware and applied software studies using these strengths are being carrying on actively. However, the products equipped with CMOS image sensor based polling method yet has several problems in degree of completeness of applied software and firmware, compared with hardware’s. CMOS image sensor system has an ineffective synchronous problem due to superfluous message exchange. Also when a sending of data is delayed continually, overhead of re-sending is large. So because of these, it has a problem in structural stability according to Polling Method. In this study, polling cycle was subdivided in high-speed synchronization method of firmware -based through MCU and synchronization method of Stepwise was proposed. Also, re-connection and data sending were advanced more efficiently by using interrupt way. In conclusion, the proposed method showed more than 20 times better performance in synchronization time and error connection. Also, a board was created by using C328R board of CMOS image sensor-based and ATmega128L which has low power, MCU and camera modules of proposed firmware were compared with provided software and analyzed in synchronization time and error connection.

• Journal of Digital Convergence
• /
• v.15 no.9
• /
• pp.453-461
• /
• 2017

The video image in the movie has become more spectacular than ever, and the expression area and the subject have been infinitely expanded, but it can not be said that the range of imagination has expanded. Instead, the 60s and 70s, which were the epochs of popular culture, The film that implements the artististic visual style and expression style of the artist. Stanley Kubrick's "Clockwork Orange", which has been pursuing technological perfection and experimental style, was created using traditional video grammar and gained a great repercussion with outstanding material and high artistic expression technique at that time. These techniques have led audiences to rational observation through irony, rather than emotional sympathy for the situation, for extreme violence and sensational films. This is because the purpose of the director was not to be in technological perfection but to reveal the contradictions of the real society and to reflect on the meaning of the existence of society itself. These creative traditional visual grammar and expression methods are a good visual style that enables the intentionally transmitted message to be transmitted more intensely and effectively, and the artistic depth can be created at the same time by unconsciously perceiving the meaning present on the back to the audience.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.241-247
• /
• 2016

As a domestic traffic control signal system, either the system with which a traffic signal turns into green at regular intervals or the system with which an amber or a red signal flickers on local roads without heavy traffic at midnight has been utilized. However, when the former system is used for roads with light traffic at midnight, delays and congestion can be incurred. Besides, in case of the latter signal system, the risk of vehicle crash is high. This study proposes a response type of flickering green signal system that rearranges signal system after analyzing beacon messages including sensor data. The proposed system, on a trunk road or a branch road at midnight, makes the signal keep flickering in green; When a vehicle enters the range of RSE, the transfer coverage, it transmits beacon messages regularly and Agent System analyzes the messages and alters the signal. It is a system by which vehicles move following the altered signal system, which will not only ensure smooth flow but also prevent vehicles from crashing on a road with light traffic. As a result of a simulation, traffic throughput and the average waiting time displayed 10 to 30 percent better improvement than existing signal systems, in terms of performance.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.2
• /
• pp.141-150
• /
• 2001

Manufacturing conb'ol applications consist of concurrent active components such as robots, AGV's (Automatic Guided Vehicles), and conveyors. Running of manufacturing control programs is interactions among those components. We can enhance the productivity and extendability of manufacturing control applications by using the object-oriented teclmology that models those components as reusable objects. But the objects in current object-oriented technology that encapsulate state and behavior infonnation are passive in a sense that those respond only when messages are sent to them. In this paper, we introduce the Distributed Active Object Systems (DAGS) approach that SUPPOltS active objects. Since active objects encapsulate control infonnation in addition to state and behavior information under COREA/Java-based distributed environment, they can represent manufacturing control components better than the objects in ordimuy object-oriented technology. TIus control infonnation provides an object with a featme that can monitor its own status as well as other object's status connected by intelface valiables. Active objects can initiate a behavior according to the change of those status. Therefore, we can sb-uctmally assemble self-initiating active objects by using intelface variables to construct a system without describing bow to control distributed objects by using message passing. As the DAOS approach supports object composability, we can enhal1ce the productivity and extendability of disbibuted manufactming control applications even better than the ordil1alY object-oriented approach. Also, the DAOS approach supports better component reusability with active objects that encapsulate control information .

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.227-235
• /
• 2011

At present, the characteristics of drivers are not properly considered when informations are provided via VMS even though the Variable Message Signs(VMS) are one of the key information provision medias on the roads. In this study, the driver's psychological response(stress index) was evaluated using a driving simulator for the position of the VMS provided, the contents of the VMS provided, the size of characters on VMS, and types of VMS expression. It was appeared that the stress is the least when the position of the VMS provided 1.5km proceeded from exit, the contents of the VMS provided are time information and types of VMS expression are character form respectively and the size of characters on VMS is appeared not important. In addition, the change of the users' satisfaction level was measured when increasing the numbers of VMS on unit distance and the size of characters. The size of character was almost not effected in similar to the result of stress index and the satisfaction level increased when increasing the number of VMS on the unit distance. The results of this research can be utilized as basic data for the ITS system design and operation stages.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.5 no.4
• /
• pp.39-49
• /
• 2017

Purpose - This study is to propose a creative idea for constant business growth and development by examining characteristics of business outcomes by phase, which are "growth" and "erosion and stagnation," respectively. Research design, data, methodology - It is necessary to identify an occurrence of crisis and its diffusion with a dynamic model in order to identify a success and failure of businesses in an organic way, not on a binary structure. The static perspective is to understand a crisis as a simply one-time event or as a linear causation. Thus, it has a limited understanding of the overall situation and has limits to investigating a foundational cause and developing long-term countermeasures. On the contrary, the dynamic perspective is to understand the crisis as circulation process of the overall system. Thus, it divides elements of the crisis as external and internal ones to understand it as the causal relationship of each element. Results - During the growth period of Burger King, the company promoted its brand very successfully with aggressive and creative marketing activities. However, due to the founder's disposal of management rights and the following changes in the management, the company had no choice but to lose focus on its business philosophy and brand management, and eventually it had to face the big crisis (resonance) which was delisting from the stock market because of the external threat; well-being trend. However, Burger King resumed lifting on the stock exchange by making great efforts to clearly identify the current issues and seek solutions. Under the spirit of "perseverance" and its slogan "Have it your way" the company is now going head to head with McDonald's in the North American region and emerging countries. Conclusions - Then, what is the most crucial factor in the success and failure of businesses? Answers may vary, however, as learned from the case study of Burger King, corporations should inspect the present and focus on developing a long-term strategy for the future and actively fulfill the actions. McDonald's may not be able to innovate by itself in the future as it may become routinized to the growth. There will be chances of winning if we change conditions of individuals or organizations to an organic system in terms of being creative. There is a hopeful message here that an individual or small business may have more advantages in the era of the idea and innovation.