• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.54-67
• /
• 2013

The main purpose of this study is to analyze the diversion rate by the levels of delay and the types of display. For this study, we developed the logit model by analyzing the result of SP survey of drivers who have driver's licence after manipulating a virtual driving simulator. The result of analysis was that the types of display was not statistically significant to the diversion rate. On the other hand, the levels of delay was very meaningful factor with the diversion rate. When the main road was flowing smoothly, drivers started to detour at the levels of delay 125% under the traffic free flow state. Similarly, when the levels of delay got worse, the diversion rate kept the same percentage as it was at the levels of delay 125% state which represented a smooth road condition. Likewise, when the main road's traffic flow was slow, drivers appeared to make detours at the same state of the levels of delay 125%. It was found that as the levels of delay got worse, the diversion rose higher than the diversion rate at the condition of slow traffic flow situation with the levels of delay 125%. The result of this study suggests the criterion of drivers detour point. For the conclusion, the result of study would be a reasonable reference for establishing transportation strategies by reflecting drivers' detouring property and would improve the efficiency of traffic flow.

• Journal of KIISE:Information Networking
• /
• v.36 no.2
• /
• pp.130-136
• /
• 2009

Delay and Disruption Tolerant Network (DTN) employs message delivery based on a store-and-forward method to conquer no guarantee of continuous end-to-end connectivity. Different from general networks, it is hard for the existing TCP/IP-based routing protocols to correctly work, due to the characteristics such as large latency and unstable link connectivity. Thus, many recent studies focus on routing protocols for DTN. In this paper, we propose a novel routing protocol for DTN with efficient message delivery utilizing mobility information such as direction or destination of mobile nodes. And this protocol is enhanced in terms of delivery ratio, decreases latency and overhead compared to the previously proposed solutions. Simulation results prove its superiority.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.340-347
• /
• 2007

Vehicle safety service can be effectively achieved with inter-vehicle communication technologies, in which moving vehicles transmit a safety related urgency information such as traffic accidents, sudden stops, obstacle appearance etc. They usually utilize a broadcast of message propagation method because the communicating vehicles are not known each other. The pure broadcasting scheme does not satisfy the requirements of vehicle safety communication service due to the transmission delay with frequent message collisions. To resolve this problem, this paper presents a group based propagation method for the multi-hop transmission, in order to deliver an urgency message to the reasonable size of vehicle troop. A group header is elected in considering of the position information of vehicles and radio transmission range. And a vehicle equivalent group is formed with the header. With benefits of the group based transmission, it is possible to minimize the unnecessary transmission and the possibility of message collisions. Simulation results show that the message propagation performance is so stable regardless of vehicle's congestion degree.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2223-2229
• /
• 2010

The integrity monitoring of anomalous GPS signal have been researched because of the degradation of GPS satellite performance. It is known that anomalous GPS signal can occur by failure of GPS satellite, sudden increase of ionosphere delay error, SA, wrong modeling for navigation parameters from control segment, and an electromagnetic wave interference, etc. In case of GPS anomaly by satellites can arise from carrier frequency, code and navigation message. In this paper, the scenarios with navigation message errors were made by using GPS simulator, and the influences of GPS navigation message error to receiver were analysed. The anomalies of preamble, bits related TOW count message, subframe ID in HOW, bits related satellite healthy, and the other navigation message errors were described and simulated. Also, the number of satellites, DOP and pseudorange are analyzed to know how the anomalous signal can affect on GPS receiver.

• Journal of KIISE:Information Networking
• /
• v.29 no.4
• /
• pp.397-404
• /
• 2002

We propose a heuristic distributed unicast routing algorithm for minimizing the total cost of the path in a point to point network with do]ay constraint. The algorithm maintains a delay vector and a cost vector about the network states and finds the path using this information. In this paper, we show that our algorithm always finds a delay-constrained path if such a path exists and has O(│E│) message complexity(│E│is the number of links in the network). Also, simulation results show that the proposed algorithm has better cost performance than other delay-constrained routing algorithms.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.5
• /
• pp.787-799
• /
• 2023

As IoT devices are widely used at home, IoT automation system that is integrate IoT devices for users' demand are gaining populrity. There is automation rule in IoT automation system that is collecting event and command action. But attacker delay the packet and make time that real state is inconsistent with state recongnized by the system. During the time, the system does not work correctly by predefined automation rule. There is proposed some detection method for delay attack, they have limitations for application to IoT systems that are sensitive to traffic volume and battery consumption. This paper proposes a practical packet delay attack detection technique that can be applied to IoT systems. The proposal scheme in this paper can recognize that, for example, when a sensor transmits an message, an broadcast packet notifying the transmission of a message is sent to the Server recognized that event has occurred. For evaluation purposes, an IoT system implemented using Raspberry Pi was configured, and it was demonstrated that the system can detect packet delay attacks within an average of 2.2 sec. The experimental results showed a power consumption Overhead of an average of 2.5 mA per second and a traffic Overhead of 15%. We demonstrate that our method can detect delay attack efficiently compared to preciously proposed method.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.3 no.1
• /
• pp.15-24
• /
• 2004

'The delay and control overhead during route discovery for destinations outside ad hoc networks are major obstacle to achieving scalability in the Internet. To solve this issue, we propose a novel route discovery scheme equipped with two augmented functions. In this paper, the Internet gateway maintains an address cache of Internet nodes frequently accessed from the ad hoc network and replies with an extended Route Response (RREP) message to the Route Request (RREQ) message based on its routing table and the address cache called EXIT(EXternal node Information Table). These augmented functions make the source node determine the location of the destination as fast as possible. Through simulations, the proposed route discovery scheme using both EXIT and extended RREP message shows considerable' reduction in both route discovery time and control message overhead.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.1018-1023
• /
• 2010

The CAN (Controller Area Network) system is the most dominant protocol for in-vehicle networking system because it provides bounded transmission delay among ECUs (Electronic Control Units) at data rates between 125Kbps and 1Mbps. And, many automotive companies have chosen the CAN protocol for their in-vehicle networking system such as chassis network system because of its excellent communication characteristics. However, the increasing number of ECUs and the need for more intelligent functions such as ADASs (Advanced Driver Assistance Systems) or IVISs (In-Vehicle Information Systems) require a network with more network capacity and the real-time QoS (Quality-of-Service). As one approach to enhancing the network capacity of a CAN system, this paper introduces a CAN system with dual communication channel. And, this paper presents a distributed message allocation method that allocates messages to the more appropriate channel using forecast traffic of each channel. Finally, an experimental testbed using commercial off-the-shelf microcontrollers with two CAN protocol controllers was used to demonstrate the feasibility of the CAN system with dual communication channel using the distributed message allocation method.

• Journal of Digital Convergence
• /
• v.10 no.6
• /
• pp.225-230
• /
• 2012

When a car accident happened, the accident vehicle should broadcast a safe message to its neighbors in multi-hop. However, the pure flooding is difficult to protect a chain-reaction collision because of the frequent collision and the communication delay. To solve this problem, we proposes a back-off algorithm applied to the estimation of the neighbor node count using the t-distribution. And we proposes a MAC protocol preventing the communication delay by separating the neighbor's count collection channel and data channel. As a result, we show the frame reception success rate of our protocol improved more 10% than the previous protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1305-1314
• /
• 2011

Initial entry section has vulnerability which exposes plain text parameter in Mobile WIMAX environment which is the 4th generation technology. Each node message need to be encrypted to prevent the third party attack or message leakage. In this paper, we propose Mobile WIMAX initial entry section encryption using Elliptic Curve Cryptosystem. We have compared proposed model with existing model using OPNET simulator tool. He delay rate has increased little bit in initial entry section than before after the comparison, but it has shown more effective in average delay and throughput than encryption applied other existing model.