• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.146-152
• /
• 2018

Due to their excellent mechanical durability and high electrical conductivity, carbon and silicon composites are potentially suitable anode materials for Li-ion batteries with high capacity and long lifespan. Nevertheless, the limitations of the composites include their poor ionic diffusion at high current densities during cycling, which leads to low ultrafast performance. In the present study, seeking to improve the ionic diffusion using hydrothermal method, electrospinning, and carbonization, we demonstrate the unique design of excavated carbon and silicon composites (EC/Si). The outstanding energy storage performance of EC/Si electrode provides a discharge specific capacity, impressive rate performance, and ultrafast cycling stability.

• 폴리머
• /
• 제35권1호
• /
• pp.35-39
• /
• 2011

본 연구에서는 고분자 전해질 연료전지의 타소 지지체로 중형기공 실리카(SBA-15)를 이용한 전통적인 주형합성법을 이용하여 중형기공 탄소(CMK-3)를 합성하였다. 합성된 CMK-3는 추가적으로 비표면적과 물리적 성질을 증가시키기 위하여 활성화제로 수산화 칼륨 (KOH)양을 0, 1, 3, 및 4g으로 달리하여 활성화하였다. 그리고 활성화된 CMK-3(K-CMK-3)에 화학적 환원 방법을 이용하여 백금과 루테늄을 답지하였다. CMK-3에 담지된 백금-루테늄 촉매의 특성을 확인하기 위해 비표면적 장치(BET), X-선 회절분석법(XRD), 주사전자현미경(SEM), 투과전자현미정(TEM), 유도결합 플라즈마 질량분석기(ICP-MS)를 이용하였다. 또한, 백금 루테늄 촉매의 전기화학적인 특성을 순환전류전압 실험으로 분석하였다. 결론적으로, 3 g의 KOH로 활성화된 CMK-3(K3g-CMK-3)가 가장 넓은 비표면적을 나타냈다. 또한, K3g-CMK-3의 높은 비표면적은 백금-루테늄의 균일한 분산과 함께 전기적인 촉매의 성능을 향상시키는 것을 확인할 수 있었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권8호
• /
• pp.451-454
• /
• 2000

We have grown vertically aligned carbon nanotubes in a large area of Co-Ni codeposited Si substrates by the thermal CVD usign $C_2H_2$ gas. Since the discovery of carbon nanotubes, growth of carbon nanotubes has been achieved by several methods such as laser vaporization, arc discharge, and pyrolysis. In particular, growth of vertically aligned nanotubes is important to flat panel display applications. Recently, vertically aligned carbon nanotubes have been grown on glass by PECVD. Aligned carbon nanotubes can be also grown on mesoporous silica and Fe patterned porous silicon using CVD. In this paper, we demonstrate that carbon nanotubes can be vertically aligned on catalyzed Si substrate when the domain density of catalytic particles reaches a certain value. We suggest that steric hindrance between nanotubes at an initial stage of the growth forces nanotubes to align vertically and each nonotubes are grown in bundle.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.275-278
• /
• 1999

We have grown vertically aligned carbon nanotubes in a large area of Co-Ni codeposited Si substrates by the thermal CVD using $C_2$H$_2$gas. Since the discovery of carbon nanotubes, Synthesis of carbon nanotubes for mass production has been achieved by several methods such as laser vaporization, arc discharge, and pyrolysis. In particular, growth of vertically aligned nanotubes is of technological importance for applications to FED. Recently, vertically aligned carbon nanotubes have been grown on glass by PECVD. Aligned carbon nanotubes can be also grown on mesoporous silica and Fe patterned porous silicon using CVD. Despite such breakthroughs in the growth, the growth mechanism of the alignment are still far from being clearly understood. Furthermore, FED has not been clearly demonstrated yet at a practical level. Here, we demonstrate that carbon nanotubes can be vertically aligned on catalyzed Si substrate when the domain density reaches a certain value. We suggest that steric hindrance between nanotubes at an initial stage of the growth forces nanotubes to align vertically and then nanotubes are further grown by the cap growth mechanism.

• 한국표면공학회지
• /
• 제52권6호
• /
• pp.326-333
• /
• 2019

The microporous carbon derived from PVDC-resin by a simple heat-treatment under an inert atmosphere exhibits a reasonable specific capacitance for a supercapacitor's electrode. However, the capacitance was rapidly decreased at high charge/discharge rate. The micropores present in an electrode surface hinder the entrance of an electrolyte ion onto the entire surface. To induce the meso-sized pores during the carbonization of PVDC-resin, Mg(OH)₂ was utilized as a hard template. The porous carbon made from the mixture of PVD-Cresin and Mg(OH)₂ include mesopores as well as micropores. The induced mesopores does not homogeneously distributed on the entire surface of the synthesized carbon. The PVDC-resin and Mg(OH)₂ are dissolved in the dimethylformamide for the hard template to evolve the pores on the synthesized carbon uniformly. The carbon made from PVDC-resin with solvent and a hard template contains mostly mesopores resulting in the high power performance. The reduced amount of solvent in the precursor derives the carbon with high specific surface area and high power density.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1507-1510
• /
• 2011

In this study, mercury vapor adsorption behaviors for some kinds of porous materials having various pore structures were investigated. The specific surface area and pore structures were studied by BET and D-R plot methods from $N_2$/77 K adsorption isotherms. It was found that the micropore materials (activated carbons, ACs) showed the highest mercury adsorption capacity. In a comparative study of mesoporous materials (SBA-15 and MCM-41), the adsorption capacity of the SBA-15 was higher than that of MCM-41. From the pore structure analysis, it was found that SBA-15 has a higher micropore fraction compared to MCM-41. This result indicates that the mercury vapor adsorptions can be determined by two factors. The first factor is the specific surface area of the adsorbent, and the second is the micropore fraction when the specific surface areas of the adsorbent are similar.

• 공업화학
• /
• 제25권1호
• /
• pp.34-40
• /
• 2014

메조 세공을 갖는 SAPO-34 촉매를 2차 주형 물질로서 탄소 나노튜브(CNT)를 이용한 수열 합성 방법에 의해 성공적으로 합성했으며, CNT 첨가량(0.5, 1.5, 2.5 및 4.5 mol%)이 촉매 성능에 미치는 영향을 조사하였다. 합성된 촉매들은 X-선 회절 분석(XRD), 주사 전자 현미경(SEM), 질소 흡탈착 등온선 및 암모니아 승온 탈착($NH_3$-TPD)을 통해 특성분석을 수행하였다. 합성된 촉매 중에서 1.5 mol% CNT를 첨가하여 제조된 SAPO-34 (1.5C-SAPO-34)가 가장 큰 메조 세공부피를 나타냈을 뿐만 아니라 총 산점의 양도 가장 높은 것으로 관찰되었다. 그러나 CNT의 함량을 그 이상 첨가하여 제조한 촉매들의 경우 결정의 크기가 너무 작아 오히려 메조 세공의 부피가 감소하는 것으로 나타났다. 제조된 촉매들의 dimethyl ether to olefins 반응에서 CNT 함량에 따른 촉매 수명과 경질 올레핀($C_2{\sim}C_4$)의 선택성을 연구하였다. 그 결과 1.5C-SAPO-34 촉매는 기존의 SAPO-34 촉매와 비교하여 더 우수한 경질 올레핀 선택도와 약 36%의 향상된 촉매수명을 나타났다.

• 임산에너지
• /
• 제21권2호
• /
• pp.17-24
• /
• 2002

소나무 수피로 부터 수증기 활성화 의하여 활성탄을 제조하였으며, 제조된 활성탄은 세공 구조 및 표면적에 대한 검토를 행하였다. 활성화를 위하여 3종류의 서로 다른 형태의 로(정치식 수직, 수평로 및 회전식 수평로)가 본 실험에 사용되었다. 정치식 수직 및 수평로를 이용하여 수피를 탄화시키고 이를 수증기 활성화시키면, 1,000 ㎡／g이상의 높은 비표면적을 얻기는 어려웠다. 분말상태의 시료를 사용하면 비표면적이 약간 향상되었지만, 여전히 정치식 로의 경우 높은 비표면적의 결과를 얻기는 어려웠다. 로타리식 수평로에서 수피를 수증기 활성화시키면, 시판 1급 활성탄과 유사한 1,000 ㎡／g 이상의 비표면적을 나타내는 활성탄을 제조할 수 있었다. 로타리식 수평로에서 제조된 활성탄은 미세공에서 중세공까지 다양한 공극 분포를 나타내었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권8호
• /
• pp.838-842
• /
• 2015

The Li-air battery is a promising candidate for the most energy-dense electrochemical power source because it has 5 to 10 times greater energy storage capacity than that of Li-ion batteries. However, the Li-air cell performance falls short of the theoretical estimate, primarily because the discharge terminates well before the pore volume of the air electrode is completely filled with lithium oxides. Therefore, the structure of carbon used in the air electrode is a critical factor that affects the performance of Li-air batteries. In a previous study, we reported a new class of carbon nanomaterial, named carbon nanoballs (CNBs), consisting of highly mesoporous spheres. Structural characterization revealed that the synthesized CNBs have excellent a meso-macro hierarchical pore structure, with an average diameter greater than 10 nm and a total pore volume more than $1.00cm^3g^{-1}$. In this study, CNBs are applied in an actual Li-air battery to evaluate the electrochemical performance. The formation mechanism and electrochemical performance of the CNBs are discussed in detail.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.103-110
• /
• 2014

Sisal fiber, an agricultural resource abundantly available in china, has been used as raw material to prepare activated carbon with high surface area and huge pore volume by chemical activation with zinc chloride. The orthogonal test was designed to investigate the influence of zinc chloride concentration, impregnation ratio, activation temperature and activation time on preparation of activated carbon. Scanning electron micrograph, Thermo-gravimetric, $N_2$-adsorption isotherm, mathematical models such as t-plot, H-K equation, D-R equation and BJH methods were used to characterize the properties of the prepared carbons and the activation mechanism was discussed. The results showed that $ZnCl_2$ changed the pyrolysis process of sisal fiber. Characteristics of activated carbon are: BET surface area was $1628m^2/g$, total pore volume was $1.316m^3/g$ and ratio of mesopore volume to total pore volume up to 94.3%. These results suggest that sisal fiber is an attractive source to prepare mesoporous high-capacity activated carbon by chemical activation with zinc chloride.