• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권2호
• /
• pp.114-121
• /
• 2011

Introduction: The aim of this study was to demonstrate that the simulation surgery on rapid prototype (RP) model, which is based on the 3-dimensional computed tomography (3D CT) data taken before surgery, has the same accuracy as traditional orthograthic surgery with an intermediate splint, using an optoelectronic tracking navigation system. Materials and Methods: Simulation surgery with the same treatment plan as the Le Fort I osteotomy on the patient was done on a RP model based on the 3D CT data of 12 patients who had undergone a Le Fort I osteotomy in the department of oral and maxillofacial surgery, Seoul National University Dental Hospital. The 12 distances between 4 points on the skull, such as both infraorbital foramen and both supraorbital foramen, and 3 points on maxilla, such as the contact point of both maxillary central incisors and mesiobuccal cuspal tip of both maxillary first molars, were tracked using an optoelectronic tracking navigation system. The distances before surgery were compared to evaluate the accuracy of the RP model and the distance changes of 3D CT image after surgery were compared with those of the RP model after simulation surgery. Results: A paired t-test revealed a significant difference between the distances in the 3D CT image and RP model before surgery.(P<0.0001) On the other hand, Pearson's correlation coefficient, 0.995, revealed a significant positive correlation between the distances.(P<0.0001) There was a significant difference between the change in the distance of the 3D CT image and RP model in before and after surgery.(P<0.05) The Pearson's correlation coefficient was 0.13844, indicating positive correlation.(P<0.1) Conclusion: Theses results suggest that the simulation surgery of a Le Fort I osteotomy using an optoelectronic tracking navigation system I s relatively accurate in comparing the pre-, and post-operative 3D CT data. Furthermore, the application of an optoelectronic tracking navigation system may be a predictable and efficient method in Le Fort I orthognathic surgery.

• Journal of Periodontal and Implant Science
• /
• 제27권1호
• /
• pp.61-78
• /
• 1997

PDGF-BB has been recognized as a highly potential growth factor for guided tissue regeneration in periodontal defect. This study carried out histologic and histometric evaluation of $200ng/cm^2$ PDGF-BB loaded bioresorbable membrane made from polyglycolic and polylactic acid. It was tested for its biocompatibility, ability to prevent epithelial downgrowth and amount of periodontal regeneration. Without membrane and PDGF-BB unloaded bioresorbable membrane were used as control. Healthy six beagle dogs were used. Each dog was anesthetized and buccal flaps were reflected in the mandibular and maxillary premolar areas. Buccal alveolar bone between the mesiobuccal and distobuccal line angles was surgically removed on the lower 2nd and 4th premolar in mandible, 2nd premolar in maxilla, to a level 4mm apical to the cementoenamel junction with creating a Class II buccal furcation defect for available space. Care was taken not to remove the root cementum layer and rubber impression materials were placed over each surgically created defect. Flaps were repositioned and sutured. Reconstructive surgery was performed 1 month after defect preparation. PDGF-BB loaded membranes and controls were randomly placed on maxillary 2nd premolars and mandibular 2nd and 4th premolars. Plaque control regimen was instituted with daily brushing with a 0.1% chlorhexidine digluconate during experimental periods. The animals were sacrificed 2 and 5 weeks after surgery and undecalcified specimens were prepared for histologic evaluation. The degree of coronal regrowth of new bone, new cementum and the amonut of new bone areas formed on the defected area of the PDGF-BB loaded membrnae turned superior to without membrane and drug unloaded membrane. Experimental membrane could prevent the epithelial downgrowth irrespective of drug loaded or not and showed good biocompatiblity, These results implicated that PDGF-BB loaded bioresorbable membrane could be highly useful tool for guided tissue regeneration of periodontal defects.

• Restorative Dentistry and Endodontics
• /
• 제26권4호
• /
• pp.296-306
• /
• 2001

The purpose of this study was to observe the effect of dexamethasone and osteogenic protein-1(BMP-7) on bone, cementum and periodontal tissue regeneration. A total of 60 Sprague-Dawley white female mice were selected and beta-APN was used for five days to extract the maxillary first molar a traumatically. After the extraction of the teeth, the mesiobuccal root canal was filled with Caviton$^{\circledR}$. The teeth were etched with citric acid for 1 min and coated with one of four different experimental solutions : DEX(500nM/ml), DEX(1000nM/ml), OP-1(100$\mu\textrm{g}$/ml) and OP-1(500$\mu\textrm{g}$/ml) for three minutes depending on the group. All teeth were then replanted under microscope. All replantation procedures were done within 30 minutes. Teeth that were replanted after 30 minutes of bench dry only was used as positive control. All animals were sacrificed at 3 weeks following replantation and histologic observtion was done. The results were as follows ; 1. Active root resorption rate was decreased by the order of OP-1(500$\mu\textrm{g}$/ml), DEX(1000nM/ml), OP-1(100$\mu\textrm{g}$/ml), and DEX(500nM/ml). There was statistically less root resorption in OP-1 (500$\mu\textrm{g}$/ml) and DEX(1000nM/ml) group(P<0.05). 2. The group with higher concentration of dexamethasone(1000nM/ml) had statistically more bone union compared to positive control group(P<0.05),but there were no significant differences among four experimental groups. 3. OP-1(500$\mu\textrm{g}$/ml) and DEX(1000nM/ml) groups showed less degree of inflammation compared to the OP-1(100$\mu\textrm{g}$/ml). DEX(500nM/ml), and positive control group (P<0.05). In conclusion, the group with higher concentration of OP-1 had the best results on root resorption, bone ankylosis and anti-inflammatory effects compared to the other experimental groups, but a long-term study is also necessary to evaluate the exact pharmacological effects of the drugs in the future.

• Restorative Dentistry and Endodontics
• /
• 제31권6호
• /
• pp.427-436
• /
• 2006

본 연구의 목적은 3차원유한요소분석법을 이용하여 정상 상악 제2소구치의 협측부의 응력분포에 다양한 교합응력이 미치는 영향을 평가하고자 하였다. 상악 제2소구치의 3차원유한요소모델을 형성한 후 형성된 모델에 3종류의 정적인 500N 점하중의 응력조건을 부여하였다. ANSYS 프로그램 (Swanson Analysis Systems, Inc., Houston, USA)으로 최대주응력과 최소주응력을 4개의 수평면 상(CEJ 상방 1 mm, CEJ 상방 0.5 mm, CEJ, CEJ 하방 0.5 mm)에서 분석하여 다음 결과를 얻었다. 1. peak stress가 협측 백악법랑경계를 따라 비대칭적인 모습으로 나타났다. 2. 압축응력 값은 법랑질의 압축파괴응력 범위 내에 있었지만 인장응력은 법랑질의 인장파괴응력 범위를 넘어섰다. 3. 비우식성치경부병소를 발생시키는 주요인은 설측교두의 협측경사면에 가해지는 교합압에 의한 인장응력이라고 보여진다.

• Restorative Dentistry and Endodontics
• /
• 제34권2호
• /
• pp.137-144
• /
• 2009

본 연구는 한국인의 하악 제1 대구치 60개를 대상으로 생리적 근단공의 크기와 형태, 근심 치근의 치근단 3mm에서 isthmus의 발생 빈도와 형태, 그리고 원심 치근의 치근단 3mm의 근관 형태를 입체현미경하에서 60배로 조사한 결과 다음과 같은 결론을 얻었다. 1.근심 치근은 두 개의 근단공을 가지는 비율이 높았으며(51.67%), 원심 치근은 하나의 근단공을 가지는 비율이 높았다(71.66%). 2. 부근단공의 빈도는 근심 치근의 1개의 근단공을 가지는 경우가 가장 높았다(26.07%) 3. 생리적 근단공의 크기는 근심 치근에서 하나의 근단공을 가지는 경우 0.329mm, 근심 협측 근단공은 0.266mm, 근심 설측 근단공은 0.246mm였으며, 원심 치근에서 하나의 근단공을 가지는 경우 0.375mm, 원심 협측 근단공은 0.291mm, 원심 설측 근단공은 0.237mm로 나타났다. 4. 근단공의 형태는 oval 형태 (69.93%)가 가장 많았다. 5.근심 치근의 치근단 3mm에서 isthmus의 발생빈도는 55%였으며, partial isthmus는 31.66%, complete isth-mus는 23.34%로 나타났다. 6.원심 치근의 치근단 3mm의 근관 형태는 oval형태(50.64%)가 가장 많았다. 이상의 연구 결과 하악 제1대구치의 성공적인 근관 치료를 위해서는 생리적 근단공의 실제 크기와 형태 및 isthmus의 존재에 대한사전 지식이 필요할 것이다.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.758-767
• /
• 1995

The purpose of this study was to evaluate canal shaping ability after canal preparation by using engine-driven nickel-titanium file and endosonic file in curved canals. 30 mesiobuccal canals of molars extracted within recent 3 months were divided into 3 groups. Group I and group II were prepared by using engine-driven nickel-titanium Gates-Glidden drill type and the engine-driven nickel-titanium file type. Group III prepared by using en do sonic file. The image of preinstrumented canals was taken by X-ray. The image of postinstrumented canal was taken by X-ray in the same condition of preinstrumentation. A magnified X-ray image on magnifier screen was traced and then compared the preinstrumentated canal image with the postinstrumentated canal image by superimposing method. The following results were obtained : 1. In the change of canal curvature, the engine-driven nickel-titanium Gates-Glidden drill type showed the least change and the ultrasonically filing showed the greatest change. 2. In the percentage of canal enlargement, the engine-driven nickel-titanium file type was greatest at all level(p<0.05), the apex of all group was the greatest, the difference of ultrasonically filing group showed greater between apex and cervix. 3. The percentage of canal enlargement on convex side was greater than that of on concave side in apex of each group(p<0.05). In the ultrasonically filing group, both sides of canal enlargement showed sharply difference(p<0.01). 4. The percentage of canal enlargement on convex side was greater than that of on concave side in the third of cervix of the engine-driven nickel-titanium file type and the ultrasonically filling. The percentage of canal enlargement of convex and concave side in the third of middle of the engine-driven nickel-titanium Gates-Glidden drill type show a similar canal enlargement between convex side and concave side. As above result, the engine-driven nickel-titanium file type was greater in canal enlargement than the other instruments. The engine-driven nickel-titanium Gates-Glidden dirll type was efficient endodontic instrument for curved canal preparation because it was least change in canal curvature.

• Restorative Dentistry and Endodontics
• /
• 제20권2호
• /
• pp.768-779
• /
• 1995

This study was performed to investigate the effect of root canal shaping techniques on the change of the shape of prepared root canal. 40 mesiobuccal canals of recently extracted mandibular 1st and 2nd molars were divided into 4 groups and shaped by step-down/balanced force technique, step-down/step-back technique, step-back technique and conventional technique respectively. The change of the shape of root canal was traced by superimposing the radiographs obtained before and after shaping of each root canal. The results were as follows. 1. By the experimented techniques except conventional technique, the root canals were more shaped in convex side of apical area and in concave side of most curved and coronal area than in the other sides(P<0.05). By conventional technique, the root canals were more shaped in convex side than in convave side from apex to orifice(P<0.05). 2. By step-down/balanced force technique, the cancave sides at C and D points of proximal view and C point of clinical view were more shaped than the convex side(P<0.05). Through the entire canal, the concave side was more shaped than the convex side in proximal view(P<0.01). But there was no statistical difference between both sides in clinical view. 3. By step-down/step-back technique, the change of root canal shape was not statistically different in concave and convex sides at each point of both views(P>0.05). And through the entire canal in proximal view, there was no statistical difference in shaping percentage between both sides. But through the entire canal in clinical view, the concave side was more shaped than the convex side(P<0.1). 4. By step-back technique, the convex side at B point of clinical more shaped than the other sides(P<0.05). Through the entire canal in proximal and clinical views, there was no statistical difference in shaping percentage between both sides. 5. Comparing the total shaping percentage among techniques, that in conventional technique was the greatest numerically, and followed by the percentages in step-down/step-back, step-down/balanced force and step-back technique. But, in proximal view, shaping percentages were not statistically different among techniques(P>0.05, ANOVA test). In clinical view, shaping percentages in step-back and conventional techniques were statistically different(P<0.01, ANOVA test). * Proximal view: radiograph taken in mesiodistal direction. * Clincal view: radiograph taken in faciolingual direction. A point : 1mm point from radiographic apex B point : center point between A and C points C point : most curved point of root canal D point : center point between C point and canal oriffice.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권4호
• /
• pp.350-359
• /
• 2005

Sagittal split ramus osteotomy(SSRO) has been commonly performed in the mandibular prognathism. The previous studies of the mandibular anatomy for SSRO have mostly been used in dry skull without consideration of age, sex or jaw relationship of patients. This study was performed to evaluate the location of mandibular canal and the anatomy of ramus, such as the location of mandibular lingula and the ramal bone marrow, which were associated with SSRO procedures, in the patients with mandibular prognathism and normal young adults by using computerized tomographs(CT) and 3D images. The young adults at their twenties, who were considered to complete their skeletal growth, and seen in the Department of Orthodontics and Oral and Maxillofacial Surgery in Chonnam National University Hospital between March 2000 and May 2003, were selected. This study was performed in 30 patients (15men, 15women) who were diagnosed as skeletal class I normal relationship, and another 30 patients (15men, 15women) who were diagnosed as skeletal class III relationship upon clinical examination and lateral cephalometric radiographs. The patients were divided into 2 groups : Class I group, the patients who had skeletal class Ⅰ normal relationship(n=30, 15men, 15women), and Class III group, the patients who had skeletal class III relationship(n=30, 15men, 15women). Facial CT was taken in all patients, and pure 3D mandibular model was constructed by V-works version 4.0. The occlusal plane was designed by three points, such as the mesiobuccal cusp of both mandibular 1st molar and the incisal edge of the right mandibular central incisor, and used as a reference plane. Distances between the tip of mandibular lingula and the occlusal plane, the sigmoid notch, the anterior and the posterior borders of ramus were measured. The height of ramal bone marrow from the occlusal plane and the distance between mid-point of mandibular canal and the buccal or lingual cortex of the mandible in the 1st and 2nd molars were measured by V-works version 4.0. Distance(Li-OP) between the occlusal plane and the tip of mandibular lingula of Class III Group was longer than that of Class I Group in men(p<0.01), but there was no significant difference in women between both groups. Distance(Li-SN) between the sigmoid notch and the tip of mandibular ligula of Class III group was longer than that of Class I Group in men(p<0.05), but there was no significant difference in women between both groups. Distance(Li-RA) between the anterior border of ramus and the tip of mandibular lingula of Class III Group was shorter than that of Class I Group in men and women(p<0.01). Distance(Li-RP) between the posterior border of ramus and the tip of mandibular lingula of Class III Group was slightly shorter than that of Class I Group in men(p<0.05), but there was no significant difference in women between both groups. Distance(RA-RP) between the anterior and the posterior borders of ramus of Class III Group was shorter than that of Class I Group in men and women(p<0.01). Longer the distance(SN-AN) between the sigmoid notch and the antegonial notch was, longer the vertical ramal length above occlusal plane, higher the location of mandibular lingula, and shorter the antero-posterior ramal length were observed(p<0.01). Height of ramal bone marrow of Class III Group was higher than that of Class I Group in men and women(p<0.01). Distance between mandibular canal and buccal cortex of Class III Group in 1st and 2nd lower molars was shorter than that of Class I Group in men and women (p<0.05 in 1st lower molar in men, p<0.01 in others). These results indicate that there are some anatomical differences between the normal occlusal patients and the mandibular prognathic patients, such as the anterior-posterior length of ramus, the height of ramal bone marrow, and the location of mandibular canal.

• 대한치과보철학회지
• /
• 제37권5호
• /
• pp.581-596
• /
• 1999

하악 우측 제1대구치 및 제2대구치가 손실된 2급하악 후방연장 국소의치에서 무치악 부위 지대치 유도면의 기울기와 형태가 지지조직에 미치는 응력 및 변위를 비교 분석하기 위하여 3차원 유한요소법을 이용하여 알아보았다. Kratochvil 형태의 유도면의 기울기가 잔존치조제에 대하여 $90^{\circ}$인 경우, $95^{\circ}$인 경우, 그리고 $100^{\circ}$인 경우와 Krol형태의 유도면의 기울기가 $90^{\circ}$인 경우에 있어서 제2소구치를 지대치로 하고 RPI형태의 유지장치를 사용하는 경우를 가정하여 모델링한 다음 제1대구치 및 제2대구치의 중심와에 150N의 하중을 가하여 응력 및 변위에 대하여 실험한 결과 다음과 같은 결론을 얻었다. 1. Kratochvil의 유도면 형태 중 기울기가 $90^{\circ}$인 경우와 Krol의 유도면 형태에서는 유사한 응력 분포를 나타내었으며 특히 지대치에서 치근단 방향으로 응력이 향하는 것으로 나타났다. 2. 유도면의 기울기가 $95^{\circ}$인 경우에서는 지대치의 치근단 부위에 응력이 증가하면서 근심방향으로 향하였으며, $100^{\circ}$인 경우에서는 치근단의 응력이 협측 및 근협측 방향으로 집중되어 나타났다. 3. 유도면의 기울기가 $90^{\circ}$인 경우에서는 지대치의치근이 조금 시계방향으로 비틀리는 양상으로 나타났으며, Krol의 유도면 형태에서는 지대치가 치근단 부위에서는 원설측으로 치경부에서는 근협측으로 변위되었다. 4. 유도면의 기울기가 $95^{\circ}$인 경우에서는 지대치의 치근은 치근단 부위에서 근설측으로 약간 변위되었고 치경부 방향으로 갈수록 반시계 방향으로 비틀리면서 보다 많이 변위되었으며, $100^{\circ}$인 경우에서는 지대치 치근단에서는 근협측으로 변위되었고 치경부방향으로 갈수록 시계방향으로 비틀리면서 보다 많이 변위되었다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.54-67
• /
• 1998

치근단 역충전 와동 형성을 위한 초음파 다이아몬드 기구의 임상적 적용의 타당성 및 특성을 평가하기 위해, 다이아몬드 기구의 상아질 삭제능력, 역충전 외동 형성효율 및 치질에 미치는 영향을 관찰하여 스테인레스 스틸 기구와 비교, 평가하였다. 치근단 역충전 와동 형성시 다이아몬드 기구와 스테인레스 스틸 기구를 발거된 소의 치아에서 노출시킨 상아질 표변에 일정한 출력과 시간 조건 하에서 작동시켜 상아질 표면으로부터의 삭제된 깊이를 측정하였다. 역충전 와동 형성효율을 평가하기 위하여 발거된 상악 제 1 대구치 치근에서 근관을 형성하고 gutta-percha로 충전한 다음 근단 3mm부위를 치아 장축에 직각되게 절제하고 초음파 기구의 와동형성 소요 시간 및 소요 stroke 수를 측정하였다. 초음파 기구를 이용한 와동 형성이 치질에 미치는 영향을 평가하기 위하여 초음파 와동 형성 전후의 치근단부 치질의 균열 발생빈도를 측정, 평가하여 다음과 같은 결과를 얻었다. $\cdot$ 저출력 또는 중출력에서 그리고 노출된 상아질에 수직 또는 수평으로 기구를 적용한 경우 모두에서, 다이아몬드 기구가 스테인레스 스틸 기구에 비해 높은 상아질 삭제효과를 나타내었다(p<0.01). $\cdot$ 초음파기구를 상아질 표면에 수직으로 적용한 경우에 출력이 높을수록 상아질 삭제효과가 우수하였으며, 수평으로 적용한 경우에는 출력에 따른 유의한 증가가 나타나지 않았다(p<0.01). $\cdot$ 중출력에서는 다이아몬드 기구가 스테인레스 스틸 기구에 비해 와동형시 소요되는 stroke 수와 시간으로 본 와동형성효율이 유의하게 우수하게 나타났다(p<0.05). $\cdot$ 저출력에서는 다이아몬드 기구가 스테인레스 스틸 기구에 비해 외동형성 후 치근단 균열 발생빈도가 유의하게 적게 나타났다(p<0.01).