• Korean Journal of Ecology and Environment
• /
• v.53 no.2
• /
• pp.156-164
• /
• 2020

The accurate estimation of fish assemblages is highly dependent on the sampling gear used for sampling. We used data from 15 sampling sites along the Nakdong River, which is a large river in South Korea, to identify differences in assemblages and sizes of freshwater fishes collected with either cast nets or gill nets, the two most commonly used sampling gear in South Korea. The two gears differed in the fish assemblages they captured, with more species caught by gill nets. Further, due to its tighter mesh size, the cast net caught significantly smaller fishes than the gill nets(independent t-test, p<0.05). We found the cast net to be appropriate for species that inhabit shallow (less than 2 m) and open water, but inappropriate for deep water, habitats with plant beds, and nocturnal species. Thus, cast net sampling is not efficient in a large river environment, and a combination of sampling methods is more suitable for understanding fish assemblages in such habitats. In general, appropriate selection of fishing methods to specific habitats is necessary to improve data quality and minimize the misrepresentation of environmental conditions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.3
• /
• pp.181-189
• /
• 2019

Discarding juvenile fishes under girth 16 cm nearly equal to inner perimeter of codend mesh size collected by a cover net method in bottom trawl. The body size of the main five species (mackerel, horse mackerel, sea bream, melon seed and black throat seaperch) was measured for their body length, girth, weight, height and width and analyzed size selectivity. Frequency of penetrating fish as retention in a cover net was less than 40% of total number of juvenile discarding fish. The most of body length or girth of five species were significantly different between in the codend and in the cover net. The 50% selection girth in the cover net ranged 8-11 cm were smaller than those in the codend ranged 9-13 cm by the species respectively. The 50% selection body length was significantly related with the ratio of body height (H) by body width (W) both for in the codend or in the cover net while 50% selection girth was not significantly related with H/W. Furthermore 50% selection fish size by fish species between in the codend and in the cover net was not significantly different both in body length or girth. Therefore, the girth selectivity represented possibly as one unique value regarding fish body shape was considered as more useful method for multi-species catch in trawl.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.12
• /
• pp.17-21
• /
• 2020

Over 60% of South Korea's land consists of mountainous topography, and recently, due to earthquakes, localized heavy rains and road development, the risks of rockfalls are getting higher. As of now, rockfall prevention facilities are being constructed in 70% of Korean roads cut slope and rockfall protections account for about 20% of them. Rockfall protection's supporting capacity is defined by combining performance of wire mesh, pillars and wire ropes. For the existing constructed rockfall protection, standards of pillars that can absorb 48~61 kJ amount of energy, wire ropes and wire mesh are presented in Guidelines for the installation and management of traffic safety facilities, Rockfall prevention facilities by Ministry of Land, Transport and Maritime Affairs (2008). However, each factor's correlation of absorption energy is not presented so it is uncertain. This study will conduct vertical drop test and identify adequacy of rockfall protection net of displacement quantity calculation factor which is delta and evaluate rockfall protection net's absorbable energy through standards of overseas performance evaluation criteria.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.136-143
• /
• 2016

To provide a type approval test for Ballast Water Treatment System (BWTS) of United States Coast Guard (USCG) Phase-II, this study examined the concentrating efficiency of nets for ${\geq}10{\mu}m$ and ${\leq}50{\mu}m$ sized phytoplanktonic organisms using different mesh sized nets ($5{\mu}m$ or $7{\mu}m$), different injection methods (hand breaker as semi-continuous assessment or pump as continuous assessment), and different filterability for the water volume. As a result of the t-test, the net concentrated efficiency between $5{\mu}m$ and $7{\mu}m$ mesh size was not significant (p > 0.05). The difference in the net concentrated efficiency for filtered natural water volume was not significant (p > 0.05). On the other hand, the Chl.a concentration in the continuous water injection method was significantly (p < 0.05) higher than that of semi-continuous water injection (t-test: t: -4.058). In the natural phytoplankton community, a total of 36 species were identified, including Bacillariophyta (17 species), Dinophyta (15 species), Euglenophyta (1 species), Dictyochophyta (2 species), and unidentified taxa (1 species). Among them, diatom Pseudo-nitzchia spp. was remarkably dominant. In particular, the net concentrated efficiency in all assessments was underestimated to be approximately 20-25%, which was caused by the small size Pseudo-nitzchia spp.. A width size of these genus might have passed through the $5{\mu}m$ or $7{\mu}m$ mesh size of the net. Therefore, net concentrated efficiency is dependent on the size of the observed species in natural water. This issue should be considered when determining the net volume for the type approval test of BWTS.

• Fisheries and Aquatic Sciences
• /
• v.14 no.1
• /
• pp.62-69
• /
• 2011

The effects of actively stimulating devices (ASD) on juvenile flatfish escape were studied to increase escape rates from the cod end by encouraging fish to approach the net wall. Two kinds of ASD were designed: a fluttering net panel, i.e., a free-end flag-like net panel, and a double conical rope array. Escape responses of juvenile bastard halibut were observed in a circulating water channel using two model cod ends, one made with diamond-shaped 43-mm-mesh-size polyethylene (PE) as a high-contrast cod end and the other with polyamid (PA) mono-ply as a low-contrast cod end. Retention rate was significantly lower with the double conical rope-array ASD in the PE cod end than with conventional PE cod ends only or the fluttering net-panel ASD inside the PE cod end. Mean retention rate with the low-contrast PA cod end was also significantly lower than that with the high-contrast PE conventional cod end. Therefore, active fluttering devices using a double conical rope array together with less visible low-contrast netting in the cod end could help to reduce the bycatch of juvenile flatfish by weakening their optomotor response and actively driving fish to the side net panel.

• Proceedings of the Zoological Society Korea Conference
• /
• 2001.10a
• /
• pp.147.1-147
• /
• 2001

No Abstract, See Full Text

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2162-2173
• /
• 2021

In this paper, the coupling of fine-mesh computational fluid dynamics (CFD) thermal-hydraulics (TH) code and neutronics code is achieved using the Ansys Fluent User Defined Function (UDF) for code development, including parallel meshing mapping, data computation, and data transfer. Also, some CFD schemes are designed for mesh mapping and data transfer to guarantee physical conservation in the coupling computation. Because there is no rigorous research that gives robust guidance on the various CFD schemes that must be obtained before the fine-mesh coupling computation, this work presents a quantitative analysis of the CFD meshing and mapping schemes to improve the accuracy of the value and location of key physical prediction. Furthermore, the effect of the sub-pin scale coupling computation is also studied. It is observed that even the pin-resolved coupling computation can also create a large deviation in the maximum value and spatial locations, which also proves the significance of the research on mesh mapping and data transfer for CFD code in a coupling computation.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.430-438
• /
• 2021

The spatial distribution of neutron flux or reaction rate was calculated by cell or mesh tally in traditional Monte Carlo simulation. However, either cell or mesh tally leads to the increase of memory consumption and simulation time. In this paper, the function expansion tally (FET) method was developed in Reactor Monte Carlo code RMC to solve this problem. The FET method was applied to the tallies of neutron flux distributions of uranium block and PWR fuel rod models. Legendre polynomials were used in the axial direction, while Zernike polynomials were used in the radial direction. The results of flux, calculation time and memory consumption of different expansion orders were investigated, and compared with the mesh tally. Results showed that the continuous distribution of flux can be obtained by FET method. The flux distributions were consistent with that of mesh tally, while the memory consumption and simulation time can be effectively reduced. Finally, the convergence analysis of coefficients of polynomials were performed, and the selection strategy of FET order was proposed based on the statistics uncertainty of the coefficients. The proposed method can help to determine the order of FET, which was meaningful for the efficiency and accuracy of FET method.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.1
• /
• pp.1-11
• /
• 2014

To compare the catches made using gillnets, trammel nets, and gillnets with supporting lines, several experiments were conducted with commercial vessels near Uljin and Pohang in Eastern Korea between July 2010 and May 2011. Two sets of 13 different nets were used, including 5 panels of gillnets and trammel nets each with stretched mesh sizes of 7.6, 9.1, 10.6, 12.1, and 13.6 cm and 3 panels of gillnets with a mesh size of 9.1 cm with supporting lines with different line spacing. The outer (stretched) mesh size of the trammel nets measured 51.5 cm. The target fishes of the fishing nets were various types of flounders. The catch rate of flounders was 50.7% of the total catch in weight. The total catch for all nets was 443.8 kg. The predominant species was pointhead flounder (Cleisthenes pinetorum). The total catch by trammel nets was 1.4 times that of the comparable gillnets. But more pointhead flounder were caught by gillnets than by trammel nets, though there was no significant difference. Fishermen catching the pointhead flounder in Korea said that there was no need to use trammel net to catch it; this was an unexpected finding compared to the findings of other flounder fisheries. The amounts of roughscale sole, brown sole, and blackfin flounder caught by trammel nets were greater than those caught by gillnets. The mean lengths (standard deviation) of blackfin flounder, pointhead flounder, brown sole, and roughscale sole were 21.0 (4.57), 22.9 (3.40), 24.7 (4.90), and 28.3 (5.43) cm, respectively; there were significant differences in mean length (p < 0.00001). Therefore, in order to catch flounder efficiently, the fishing nets and mesh size should be chosen according to the target species. One advantage of using supporting lines is that it prevents breakage by strengthening the material especially when utilized on a rough bottom. Catch by using gillnet with supporting lines was not greater than that by using trammel net for the conservation of fisheries resources.

• Journal of Korean Society on Water Environment
• /
• v.30 no.1
• /
• pp.68-79
• /
• 2014

There are marked differences in climate condition between east-facing slopes and west-facing slopes in Mt. Seorak (1,708 m). This study was conducted to find out the differences of benthic macroinvertebrate communities between both slopes of Mt. Seorak. Quantitative (Surber net; $30cm{\times}30cm$, mesh: 1mm) and qualitative (Hand net; mesh: 1mm) samplings ware carried out seasonally in each site which had 100-meter-high difference from November 2010 to November 2011. Most of the survey sites showed sound environmental conditions because they were located in the protection area of the national park. The benthic macroinvertebrates collected from all survey sites were composed of 158 species, 62 families, 17 orders, 7 classes and 5 phyla. DCA (Detrended Correspondence Analysis) ordination based on the abundance of benthic mactoinvertebrates showed that altitude was a major factor governing the structure of benthic macroinvertebrate community. There was no significant difference of the communities between both slopes.