• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.2
• /
• pp.143-151
• /
• 2003

A series of fishing experiments was carried out in the waters off the east coast of Korea from January, 2002 to March, 2003, using gill nets of different mesh sizes (m = 180, 210, 240, 270, and 300 ㎜) to determine the size selectivity of gill net for male snow crab Chionoecetes opilio. The maximum carapace length (RL) of each male snow crab caught in the fishing experiment was measured. The master curve of mesh selectivity was estimated by applying the extended Kitahara's method. Two kinds of functional models, quadratic function and cubic function were used to express logarithmic selectivity curve and were fitted to the data using the method of least squares. The obtained results were summarized as follows; 1. The cubic function of asymmetry was chosen to determine the selectivity curve of gill net for male snow crab from the model deviance comparison. 2. The result of size selectivity showed that the catch number of small male crab was getting decreased according to the increase of mesh size. 3. The optimum value (RL/m) was 0.549 and the RL/m was estimated to be 0.281, 0.296, and 0.356 when the retention probability were 0.2, 0.25 and 0.5, respectively.

• Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.101-108
• /
• 2013

An active stimulating device (ASD) consisting of a net panel or ropes fluttering in the turbulence inside the cod end was effective in driving fish near the cod end to reduce juvenile by-catch. The fluttering characteristics of the rope and net panel were examined by video observations and analyzed for fluttering amplitude and period in a water channel and in field experiments with a bottom trawl. The amplitude ratio of the fluttering ropes or nets in the tank test increased with the fluttering index as the diameter of the twine, mesh size, flexibility, and flow velocity changed, whereas the period decreased with the above factors. In bottom trawl experiments, the range of mean depth difference in the fluttering net panel was 12-17% of the length of the fluttering net, and the period of depth difference or three-dimensional (3D) tilt was revealed, with shorter ones ranging from 2 to 6 s. The amplitude as depth difference and period from field measurements were similar to those of nets in tank experiments and also to the period of 3D flow velocity inside the cod end. These results could be used to design an ASD that could be used for to the cod end of actual towed fishing gear to reduce juvenile by-catch.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.1
• /
• pp.7-10
• /
• 1975

The catches of mackerel by monofilament and multifilament net were compared by means of $x^2$ and t-test method. In order to improve the netting twine of drift nets, 6 shoots 5 different mesh and nylon-monofilament netting twines $(B\times2,\;C\;D,\;F,)$ and 2 shoe nylon-multifilament $(A\times2)$ which are using near the Jeju Island in contemporary days were used for the experiment. These gill no were connected in order of A, ,B, C, A, B, E, F and operated fly fishing boat Taeann Ho (7T) near sea of Jeju Ialand from May 1974 to August 1974. The results obtained are as follows: 1. B type nylon-monofilament gill nets were superior to nylon-multifilament gill nets in catch according to the result of $X^2$ test and t-test, and the catch ratio was $M_A:\;M_B=1:1.8$. 2. 75mm mesh size C, D nylon-monofilament gill nets were superior to 85mm mesh size nylonmonofilament gill nets, and their catch ratio were E, F: C, D=1:2.8. 3. The catch ratio C, D and E, F type nets were compared by means of t-teat, however could not recognized their relationship.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.3
• /
• pp.193-198
• /
• 2022

In this study, for the purpose of reducing the catch of small giant octopus in a net pot, an escape experiment of octopus was performed on five types of escape rings of different sizes. As a result of the experiment, the smallest giant octopus with a weight of 406 g was found to escape from an escape ring with a diameter of 30 mm or larger, and 592 g octopus, a weight similar to the octopus of the current minimum landing weight (600 g), escaped from an escape ring with a diameter of larger than 40 mm. An individual weight with 406 g becomes 39 mm when converted from a diameter of 25 mm circular escape vent; that is, the circumference to the inner diameter of the mesh. It can be inferred that the converted mesh size of 39 mm cannot escape. Logistic regression analysis was performed using a generalized linear model (GLM) to investigate the correlation between the ratio of escape ring size/Mantle diameter (R/MD) and the escape rate. As a result, it was found that there was a significant correlation between the R/MD ratio and the escape rate and that the higher the R/MD ratio, the greater the escape rate. As a result of logistic regression analysis, the R/MD value was denoted 0.520 with the 50% escape rate. In addition, it can be estimated to be about 50 mm when converted to the mesh size. Therefore, in this study, the diameter of the escape ring and the size of the escape possible of the octopus were experimentally considered. It was found that there was a significant correlation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.4
• /
• pp.352-359
• /
• 2013

To estimate the mesh selectivity of gillnet for ocellate spot skate (Okamejei kenojei), the field tests were carried out 12 times with six different mesh sizes (121.2mm, 137.7mm, 151.5mm, 168.3mm, 178.2mm, 189.4mm) in the coastal waters of Taean, Chungcheongnamdo of Korea, 2010~2011. In the field tests, the total number of species was 31, and that of catch was 1,410 and the total weight was 618,006g. The number and weight of ocellate spot skate which is main target in this study were 1,004 and 434,592g, respectively. The catch in number of ocellate spot skate occupied about 71.2% in total catch. The others of catch species were marbled sole (8.4%), sea raven (4.4%), japanese swimming crab (4.2%) and flatfish (4.1%) and so on. The range of body disk width (DW) of ocellate spot skates which were caught in this study was 15.2~35cm and the mode was 27~29cm. The estimation equation of mesh selectivity using the extended Kitahara's method was expressed as s $(R)=s(DW/m)={\exp}\{(-0.56R^3-1.80R^2+12.96R-9.99)-4.26\}$. The optimum value of DW/m for 1.0 of retention probability in this estimation equation was estimated 1.899 and DW/m was estimated to be 1.194, 1.314, 1.395, 1.461 and 1.520 when the retention probability were 0.1, 0.2, 0.3, 0.4 and 0.5, respectively. When applied to the retention probability of 0.5, the optimum mesh size was estimated to be 177.0mm on first maturity disk width 26.9cm of ocellate spot skate.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2162-2172
• /
• 2020

Due to its computational efficiency and geometrical flexibility, the Method of Characteristics (MOC) has been widely used for light water reactor lattice physics analysis. Usually acceleration methods are necessary for MOC to achieve acceptable convergence on practical reactor physics problems. Among them, Coarse Mesh Finite Difference (CMFD) is very popular and can drastically reduce the number of transport iterations. In OpenMOC, CMFD acceleration was implemented but had the limitation of supporting only a uniform CMFD mesh, which would often lead to splitting MOC source regions, thus creating an unnecessary increase in computation and memory use. In this study, CMFD acceleration with a non-uniform Cartesian mesh is implemented into OpenMOC. We also propose a quadratic fit based CMFD prolongation method in the axial direction to further improve the acceleration when multiple MOC source regions are contained in one CMFD coarse mesh. Numerical results are presented to demonstrate the improvement of the CMFD acceleration capability in OpenMOC in terms of both efficiency and stability.

• Journal of Ecology and Environment
• /
• v.38 no.3
• /
• pp.383-388
• /
• 2015

Reservoirs consist of two different environments, the littoral and the pelagic zone, and different fishing gear is commonly used in each zone-gill nets in the pelagic zone and electrofishing in the littoral zone. However, an active fishing gear, the cast net, is normally used instead of electrofishing for scientific studies in South Korea. In order to estimate cast net effectiveness for determining fish status in reservoirs, the study was conducted at 15 reservoirs with two different fishing gears: a cast net in the littoral zone and gill nets in the pelagic zone. When combining catches of both gears, species richness increased substantially compared to using one gear only. There was a size difference in fish caught by each net, and small fish were predominantly caught with the cast net due to its small mesh size (7 mm). The combined length of six species, used for length-weight relationship analysis, collected with the cast net was smaller than that collected with gill nets (independent t-test, P < 0.05). In this study, cast net sampling provided sufficient data for the littoral zone, but not enough to identify the overall fish assemblage in studied reservoirs. Utilization of only one gear can therefore lead to substantial underestimation of fish status, and a combination of both gears is recommended for determining more reliable estimates of fish status in reservoirs.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.2
• /
• pp.122-127
• /
• 2009

A series of fishing experiments was carried out in the eastern coastal waters of Korea from January, 2002 to March, 2003, using gill nets of different mesh sizes (m 180, 210, 240, 270 and 300 mm) to determine the size selectivity of gill net for female snow crab, Chionoecetes opilio. The catch of experimental gears was mostly snow crab (97%), Chionoecetes opilio. The maximum carapace length (RL) of each female snow crab caught in the fishing experiments was measured. The master selection curve was estimated by applying the extended Kitahara s method. The selection curve showed that the gill nets of larger mesh size allowed more female crabs of small carapace size to escape. The optimum values of RL/m for 1.0 of retention probability was 0.563 and RL/m was estimated to be 0.249, 0.290, 0.319, 0.344 and 0.367 when the retention probability were 0.1, 0.2, 0.3, 0.4 and 0.5, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.2
• /
• pp.173-178
• /
• 2011

The species and size compositions of fishes in the coastal waters off Taean were determined using samples collected with a two-sided fyke net in 2008. A total of 22 species, 2,371 individuals and 1,351 kg of fish were collected during the study. Of the fish collected, semi-benthic fishes such as Sebastes schlegelii, Mugil cephalus and Chelon haematocheilus were the most abundant (77.5% and 76.4% for total number of individuals and biomass, respectively). Benthic fishes such as Pleuronectus yokohamae and Paralichthys olivaceus were collected in almost all seasons but were low in abundance (5.3% and 4.1% for total number of individuals and biomass, respectively). Seasonal migrants were plentiful; specifically, Seriola quinqueradiata was abundant in November while Konosirus punctaus was common in July. Seasonal migrants of small-sized fish have been known to be abundant in the coastal water of western Korea including the study area, but few fish less than 100 mm were collected due to the large mesh size (30 mm) of the net used.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1905-1915
• /
• 2019

This paper investigated the influence of simple support girds on flow, irrespective of having mixing vanes, in a 1 × 3 array rod bundle by using CFD methodology and the most accurate turbulence model which could reflect the actual physics of the flow was determined. In this context, a CFD model was created simulating the experimental studies on a single-phase flow [1] and the results were compared with the experimental data. In the first part of the study, influence of mesh was examined. Tetra, hybrid and poly type meshes were analyzed and convergence study was carried out on each in order to determine the most appropriate type and density. k - ε Standard and RSM LPS turbulence models were used in this section. In the second part of the study, the most appropriate turbulence model that could reflect the physics of the actual flow was investigated. RANS based turbulence models were examined using the mesh that was determined in the first part. Velocity and turbulence intensity results obtained on the upstream and downstream of the spacer grid at -3d_h, +3d_h and +40d_h locations were compared with the experimental data. In the last section of the study, the behavior of flow through the spacer grid was examined and its prominent aspects were highlighted on the most appropriate turbulence model determined in the second part. Results of the study revealed the importance of mesh type. Hybrid mesh having the largest number of structured elements performed remarkably better than the other two on results. While comparisons of numerical and experimental results showed an overall agreement within all turbulence models, RSM LPS presented better results than the others. Lastly, physical appearance of the flow through spacer grids revealed that springs has more influence on flow than dimples and induces transient flow behaviors. As a result, flow through a simple support grid was examined and the most appropriate turbulence model reflecting the actual physics of the flow was determined.