• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1347-1354
• /
• 2020

To improve the efficiency of MC criticality calculation, an acceleration method of fission source convergence which gives an improved initial fission source is proposed. In this method, the MC global homogenization is carried out to obtain the macroscopic cross section of each material mesh, and then the nonlinear iterative solution of the SP3 equations is used to determine the fission source distribution. The calculated fission source is very close to the real fission source, which describes its space and energy distribution. This method is an automatic computation process and is tested by the C5G7 benchmark, the results show that this acceleration method is helpful to reduce the inactive cycles and overall running time.

• 한국산업융합학회 논문집
• /
• 제27권4_2호
• /
• pp.973-980
• /
• 2024

Dependence of dynamic fracture path on loading velocity was observed from experimental results based on the three point bending fracture in cast iron. In this study, 3D and 2D numerical simulations are used to evaluate singular stress fields near crack tip and fracture mechanics parameters. Moving finite element technique, 2D and 3D Delauney automatic mesh generation and contact-noncontact evaluation is introduced into the numerical method. Dynamic fracture thoughness is decreased with increase of impact loading velocity. Fracture mode-ratio corresponds to initial kink angle of fracture path. The numerical result shows that the maximum hoop stress criterion cannot be applied to dynamic fracture of cast iron.

• 한국통신학회논문지
• /
• 제40권1호
• /
• pp.233-239
• /
• 2015

LED 가로등의 수요가 증가하면서 LED 가로등의 효율성 제고 및 다양한 부가서비스를 위한 원격 제어 및 모니터링에 대한 수요가 지속적으로 증가하고 있다. 기존의 가로등 원격 제어 시스템은 전력선 통신망을 이용하는 유선 방식이 주를 이루고 있고, 무선 연결 방식이 존재하나 전송 속도의 제약이 있어 단순 제어 및 모니터링 이외의 부가 서비스를 지원하기에는 어려운 점이 있다. 따라서 본 논문에서는 무선랜 기반의 IEEE 802.11s 무선 메쉬 네트워크를 LED 가로등의 원격 제어 및 모니터링의 백본 네트워크로 사용하는 시스템을 제안한다. 무선 메쉬 네트워크를 사용함으로써 LED 가로등의 원격 제어 및 모니터링과 동시에 LED 가로등이 공공 Wi-Fi 액세스 포인트의 역할을 수행하게 한다. 이를 위해 Wi-Fi 통합형 LED 가로등 컨트롤러를 설계하고 시스템을 구현하고 Test Bed를 구성하여 성능을 평가 하였다. 본 논문에서 제안하는 시스템은 무선 메쉬를 활용하여 U-city의 인프라로의 역할 수행이 가능할 것으로 판단된다.

• 한국컴퓨터정보학회논문지
• /
• 제28권9호
• /
• pp.73-79
• /
• 2023

본 논문에서는 삼각형 메쉬(Triangular mesh) 기반에서 변형률 기반 동역학(Strain-based dynamics, SBD)을 안정적으로 표현할 수 있는 LOD(Level of detail)기반의 굽힘 스프링(Bending spring) 구조와 감쇠 기법에 대해 설명한다. SBD는 삼각형 메쉬의 에지 길이(Edge length) 기반의 에너지 대신 변형률(Strain)을 활용하여 탄성 에너지를 모델링한다. 하지만, 큰 외력이 발생하면 에지 기반으로 탄성 에너지를 계산하는 과정에서는 비정상적인 삼각형(Degenerate triangle)이 나타나고 이 문제는 불안정한 변형률을 계산하기 때문에 잘못된 방향으로 늘어나는 문제가 발생한다. 본 논문에서는 이 문제를 효율적으로 처리할 수 있는 LOD기반의 굽힘 스프링을 생성하고 에너지를 계산하는 방법에 대해 소개한다. 결과적으로 본 논문에서 제안하는 기법은 굽힘 스프링 기반의 SBD를 안정적이고 효율적으로 처리할 수 있기 때문에 옷감 시뮬레이션을 안정적으로 표현할 수 있다.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4698-4707
• /
• 2022

As part of the ICRP Task Group 103 project, we developed ten thyroid models for the pediatric mesh-type reference computational phantoms (MRCPs). The thyroid is not only a radiosensitive target organ needed for effective dose calculation but an important source region particularly for radioactive iodines. The thyroid models for the pediatric MRCPs were constructed by converting those of the pediatric voxel-type reference computational phantoms (VRCPs) in ICRP Publication 143 to a high-quality mesh format, faithfully maintaining their original topology. At the same time, we improved several anatomical parameters of the thyroid models for the pediatric MRCPs, including the mass, overlying tissue thickness, location, and isthmus dimensions. Absorbed doses to the thyroid for the pediatric MRCPs for photon external exposures were calculated and compared with those of the pediatric VRCPs, finding that the differences between the MRCPs and VRCPs were not significant except for very low energies (<0.03 MeV). Specific absorbed fractions (target ⟵ thyroid) for photon internal exposures were also compared, where significant differences were frequently observed especially for the target organs/tissues close to the thyroid (e.g., a factor of ~1.2-~327 for the thymus as a target) due mainly to anatomical improvement of the MRCP thyroid models.

• 사물인터넷융복합논문지
• /
• 제10권3호
• /
• pp.1-6
• /
• 2024

산업계를 중심으로 최근에는 위치에 구애받지 않고 다양한 서비스를 자유롭게 이용하고자 하는 수요가 급증하면서, 비용 효율적이고 구축이 용이한 wireless mesh network (WMN) 솔루션이 다시 주목받고 있다. 본 논문에서는 3차원 WMN을 위한 라우팅 솔루션인 Autonomous Load-balancing Field-based Anycast routing+ (ALFA++)의 구현 이슈를 심도 있게 살펴본다. 이후에는 저가 상용 장치를 활용하여 구축한 대학 캠퍼스 건물 내 802.11 기반 3차원 WMN 테스트베드에서 ALFA+의 성능을 평가하고 이를 통해 궁극적으로 ALFA+의 실제 활용 가능성을 검증한다. 기존 대부분의 연구는 가상환경 기반 시뮬레이션을 통한 성능평가를 한 반면, 본 연구에서는 실환경 테스트베드에서 상용 장치를 활용한 성능평가 수행을 위해 필요한 구현 관련 상세정보를 소개하고 실환경 테스트베드에서의 결과를 기반으로 ALFA+의 실질적인 가치를 평가했다는 점에서 큰 의미가 있다.

• Journal of applied mathematics & informatics
• /
• 제39권3_4호
• /
• pp.419-435
• /
• 2021

This paper deals with numerical treatment of singularly perturbed differential equations involving small delays. The highest order derivative in the equation is multiplied by a perturbation parameter 𝜀 taking arbitrary values in the interval (0, 1]. For small 𝜀, the problem involves a boundary layer of width O(𝜀), where the solution changes by a finite value, while its derivative grows unboundedly as 𝜀 tends to zero. The considered problem contains delay on the convection and reaction terms. The terms with the delays are approximated using Taylor series approximations resulting to asymptotically equivalent singularly perturbed BVPs. Inducing exponential fitting factor for the term containing the singular perturbation parameter and using central finite difference for the derivative terms, numerical scheme is developed. The stability and uniform convergence of difference schemes are studied. Using a priori estimates we show the convergence of the scheme in maximum norm. The scheme converges with second order of convergence for the case 𝜀 = O(N^-1) and for the case 𝜀 ≪ N^-1, the scheme converge uniformly with first order of convergence, where N is number of mesh intervals in the domain discretization. We compare the accuracy of the developed scheme with the results in the literature. It is found that the proposed scheme gives accurate result than the one in the literatures.

• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.142-146
• /
• 2023

We present a method for generating 3D structures and rendering objects by combining VAE (Variational Autoencoder) and GAN (Generative Adversarial Network). This approach focuses on generating and rendering 3D models with improved quality using residual learning as the learning method for the encoder. We deep stack the encoder layers to accurately reflect the features of the image and apply residual blocks to solve the problems of deep layers to improve the encoder performance. This solves the problems of gradient vanishing and exploding, which are problems when constructing a deep neural network, and creates a 3D model of improved quality. To accurately extract image features, we construct deep layers of the encoder model and apply the residual function to learning to model with more detailed information. The generated model has more detailed voxels for more accurate representation, is rendered by adding materials and lighting, and is finally converted into a mesh model. 3D models have excellent visual quality and accuracy, making them useful in various fields such as virtual reality, game development, and metaverse.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제13권1호
• /
• pp.19-38
• /
• 2006

We analyze the spectral collocation approximation for a parabolic partial integrodifferential equations(PIDE) with a weakly singular kernel. The space discretization is based on the spectral collocation method and the time discretization is based on Crank-Nicolson scheme with a graded mesh. We obtain the stability and second order convergence result for fully discrete scheme.

• 대한수학회보
• /
• 제51권1호
• /
• pp.267-285
• /
• 2014

An upstream scheme based on the pseudostress-velocity mixed formulation is studied to solve convection-dominated Oseen equations. Lagrange multipliers are introduced to treat the trace-free constraint and the lowest order Raviart-Thomas finite element space on rectangular mesh is used. Error analysis for several quantities of interest is given. Particularly, first-order convergence in $L^2$ norm for the velocity is proved. Finally, numerical experiments for various cases are presented to show the efficiency of this method.