• Journal of Digital Convergence
• /
• v.11 no.8
• /
• pp.205-212
• /
• 2013

In this paper, we present a procedural modeling algorithms to create Korean traditional stone fence using the fractal subdivision. The main process of the algorithm is to get the next step mesh by subdividing each triangle in the previous step triangular mesh. This process is repeated recursively. Dividing each triangle into four sub-triangles after choosing a random point on each side of the triangle and moving each vertices in the normal direction with random perturbations make the bumpy appearance of stone fences. In each step we remove flat vertices which does not influence the shape of the stone. The discrete curvature determines the flatness of a vertex. New triangles whose vertices are the vertices around the removed vertex are added to make a triangular mesh.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.216-222
• /
• 2012

Newly proposed RG-MADS (Randomly Guided Mesh Adaptive Direct Search) has been applied to the optimal design of Interior Permanent Magnet Synchronous Motor (IPMSM) which has the distinctive features of magnetic saturation. RG-MADS, advanced from classical MADS algorithm, has the superiority in computational time and reliable convergence accuracy to the optimal solution, thus it is appropriate to the optimal design of IPMSM coupled with time-consuming Finite Element Analysis (FEA), necessary to the nonlinear magnetic application for better accuracy. Effectiveness of RG-MADS has been verified through the well-known benchmark-functions beforehand. In addition, the proposed RG-MADS has been applied to the optimal design of IPMSM aiming at maximizing the Maximum Torque Per Ampere (MTPA), which is regarded as representative design goal of IPMSM.

• Nuclear Engineering and Technology
• /
• v.52 no.3
• /
• pp.485-498
• /
• 2020

A diffusion synthetic acceleration (DSA) technique for the S_N transport equation discretized with the linear discontinuous expansion method with subcell balance (LDEM-SCB) on unstructured tetrahedral meshes is presented. The LDEM-SCB scheme solves the transport equation with the discrete ordinates method by using the subcell balances and linear discontinuous expansion of the flux. Discretized DSA equations are derived by consistently discretizing the continuous diffusion equation with the LDEM-SCB method, however, the discretized diffusion equations are not fully consistent with the discretized transport equations. In addition, a fine mesh rebalance (FMR) method is devised to accelerate the discretized diffusion equation coupled with the preconditioned conjugate gradient (CG) method. The DSA method is applied to various test problems to show its effectiveness in speeding up the iterative convergence of the transport equation. The results show that the DSA method gives small spectral radii for the tetrahedral meshes having various minimum aspect ratios even in highly scattering dominant mediums for the homogeneous test problems. The numerical tests for the homogeneous and heterogeneous problems show that DSA with FMR (with preconditioned CG) gives significantly higher speedups and robustness than the one with the Gauss-Seidel-like iteration.

• Applied Science and Convergence Technology
• /
• v.25 no.2
• /
• pp.25-27
• /
• 2016

The surface flatness of metal meshes in a deflector of particle beam mass spectrometer (PBMS) required ideally flat, and this can specify the particle trajectories which goes through the detector. In this research, charged particle current was measured using the different surface roughness deflectors. NaCl particles were generated monodispersed in its size by using differential mobility analyzer and the whole processes were followed the way calibrating PBMS. The results indicate that the mesh surface morphology in the deflector can affect to the particle size and the concentration errors, and sensitivity of PBMS.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.6
• /
• pp.98-106
• /
• 2022

Among the parts assembled in the gas receiver of a marine engine, the titanium alloy stainless steel (STS 316Ti) wire mesh serving as a filter was broken, and the related part, the turbine fan of the turbocharger, was damaged. In this study, a sample of the grid wire mesh was collected and the cause of breakage was analyzed, and a method of minimizing the dent mark caused by the mold during wire forming, which is one of the most direct causes, was studied. In addition, the optimum mold shape was realized through FEM simulation, and the wire wave molding machine capable of controlling the speed was improved by supplementing the problems of the existing wire wave molding machine, thereby improving durability with minimal dent marks.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.22-29
• /
• 2022

Recently, with the development of mobile computing power, mobile-based VR and AR services are being developed. Due to network performance and computing power constraints, VR and AR services using large-capacity 3D content have limitations. A study on an efficient 3D content load method for a mobile device is required. The conventional method downloads all 3D content used for AR services at the same time. In this paper, we propose an active 3D content load according to the user's track. The proposed method is a partitioned 3D object load. Edge servers were installed for each area and connected through the MESH network. Partitioned load the required 3D object in the area referring to the user's location. The location is identified through the edge server information of the connected AP. The performance of the proposed method and the conventional method was compared. As a result of the comparison, the proposed method showed a stable Mobile AR Service. The results of this study, it is expected to contribute to the activation of edge server-based AR mobile services.

• Journal of Mechanical Science and Technology
• /
• v.20 no.1
• /
• pp.94-109
• /
• 2006

An improved meshfree method called the Petrov-Galerkin natural element (PG-NE) method is introduced in order to secure the numerical integration accuracy. As in the Bubnov-Galerkin natural element (BG-NE) method, we use Laplace interpolation function for the trial basis function and Delaunay triangles to define a regular integration background mesh. But, unlike the BG-NE method, the test basis function is differently chosen, based on the Petrov-Galerkin concept, such that its support coincides exactly with a regular integration region in background mesh. Illustrative numerical experiments verify that the present method successfully prevents the numerical accuracy deterioration stemming from the numerical integration error.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.11
• /
• pp.969-974
• /
• 2014

Previously fabricated electronic devices were used for vacuum manufacturing processes such as conventional semiconductor manufacturing. However, they are difficult to apply to continuous processes such as roll-to-roll printing, which results in very high device manufacturing and processing costs. Therefore, many developers have been interested in applying continuous processes to contact printing or noncontact printing technologies and they proposed various continuous printing techniques instead of conventional batch coating. In this paper, we proposed improved gravure offset printing process as one of the contact printing technique. We used etching pattern geometry with soft core blanket roll for printing of ultra fine line below the 10um.Using this technique we obtained flexible metal grid mesh film as transparent conductive film.

• Journal of applied mathematics & informatics
• /
• v.36 no.1_2
• /
• pp.135-154
• /
• 2018

In this paper, an almost second order overlapping Schwarz method for singularly perturbed third order convection-diffusion type problem is constructed. The method splits the original domain into two overlapping subdomains. A hybrid difference scheme is proposed in which on the boundary layer region we use the combination of classical finite difference scheme and central finite difference scheme on a uniform mesh while on the non-layer region we use the midpoint difference scheme on a uniform mesh. It is shown that the numerical approximations which converge in the maximum norm to the exact solution. We proved that, when appropriate subdomains are used, the method produces convergence of second order. Furthermore, it is shown that, two iterations are sufficient to achieve the expected accuracy. Numerical examples are presented to support the theoretical results. The main advantages of this method used with the proposed scheme are it reduce iteration counts very much and easily identifies in which iteration the Schwarz iterate terminates.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.365-368
• /
• 2011

무선 메쉬 네트워크 (Wireless Mesh Network, WMN)는 인터넷 사용자에게 멀티홉 무선 백본 네트워크로 인터넷 접속을 제공하기 위한 기술로 각광받고 있다. IEEE 802.11에서는 3개 또는 12개의 겹치지 않는 (non-overlapping) 채널을 지원하지만, WMN 환경에서 멀티 채널을 활용하는 디자인은 중요한 이슈이다. 본 논문에서는 멀티 채널 WMN에서의 트래픽 요구에 맞추어 채널 할당과 라우팅을 분산적인 (Distributed) 방식으로 수행하는 OnCAR (On-demand Channel Assignment and Routing) 프로토콜을 제안한다. OnCAR는 트래픽의 요구에 따른 채널 할당이 가능하고, 채널 다양성 (diversity)를 고려한 라우팅 기법을 제공한다. NS-2를 사용한 시뮬레이션을 통해 OnCAR가 기존 멀티 채널 프로토콜에 비해 향상된 네트워크 성능을 보임을 확인하였다.