• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.6
• /
• pp.535-550
• /
• 2018

Total organic carbon (TOC) will replace chemical oxygen demand ($COD_{Mn}$) as an effluent water quality standard in public sewage treatment works (PSTWs) from 2021 in Korea. To ensure effective control of TOC in the effluent, investigation was carried out into TOC levels and sewage treatment operation factors in five target PSTWs using anaerobic-anoxic-aerobic ($A_2O$) processes, media, membrane, and sequencing batch reactor (SBR) technologies. TOC removal efficiencies appeared to be 93-96% on average. As a fraction of TOC, biodegradable dissolved organic carbon (BDOC) was reduced from 64% in the influent to 9% in the effluent in these PSTWs. During the investigation, biological treatment processes were applied flexibly for operation factors such as HRT, SRT, MLSS, F/M ratios and BOD volume loads, based on the influent characteristics and design conditions. As a result, we suggest efficient operating conditions in PSTWs by evaluating relationships between TOC removal and operation factors.

• Journal of Sensor Science and Technology
• /
• v.32 no.5
• /
• pp.328-333
• /
• 2023

This study experimentally verified the etch rate of the SiO₂ sacrificial layer etching process with a single etch hole using vapor-phase hydrogen fluoride (VHF) etching. To fabricate small-sized polysilicon etch holes, both circular and triangular pattern masks were employed. Etch holes were fabricated in the polysilicon thin film on the SiO₂ sacrificial layer, and VHF etching was performed to release the polysilicon thin film. The lateral etch rate was measured for varying etch hole sizes and sacrificial layer thicknesses. Based on the measured results, we obtained an approximate equation for the etch rate as a function of the etch hole size and sacrificial layer thickness. The etch rates obtained in this study can be utilized to minimize structural damage caused by incomplete or excessive etching in sacrificial layer processes. In addition, the results of this study provide insights for optimizing sacrificial layer etching and properly designing the size and spacing of the etch holes. In the future, further research will be conducted to explore the formation of structures using chemical vapor deposition (CVD) processes to simultaneously seal etch hole and prevent adhesion owing to polysilicon film vibration.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.311-311
• /
• 2009

Carbon nanotubes (CNTs) belong to an ideal material for field emitters because of their superior electrical, mechanical, and chemical properties together with unique geometric features. Several applications of CNTs to field emitters have been demonstrated in electron emission devices such as field emission display (FED), backlight unit (BLU), X-ray source, etc. In this study, we fabricated a CNT cathode by using filtration processes. First, an aqueous CNT solution was prepared by ultrasonically dispersing purified single-walled CNTs (SWCNTs) in deionized water with sodium dodecyl sulfate (SDS). The aqueous CNT solution in a milliliter or even several tens of micro-litters was filtered by an alumina membrane through the vacuum filtration, and an ultra-thin CNT film was formed onto the alumina membrane. Thereafter, the alumina membrane was solvated by acetone, and the floating CNT film was easily transferred to indium-tin-oxide (ITO) glass substrate in an area defined as 1 cm with a film mask. The CNT film was subjected to an activation process with an adhesive roller, erecting the CNTs up to serve as electron emitters. In order to measure their luminance characteristics, an ITO-coated glass substrate having phosphor was employed as an anode plate. Our field emitter array (FEA) was fairly transparent unlike conventional FEAs, which enabled light to emit not only through the anode frontside but also through the cathode backside, where luminace on the cathode backside was higher than that on the anode frontside. Futhermore, we added a reflecting metal layer to cathode or anode side to enhance the luminance of light passing through the other side. In one case, the metal layer was formed onto the bottom face of the cathode substrate and reflected the light back so that light passed only through the anode substrate. In the other case, the reflecting layer coated on the anode substrate made all light go only through the cathode substrate. Among the two cases, the latter showed higher luminance than the former. This study will discuss the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the either side.

• Journal of Applied Biological Chemistry
• /
• v.52 no.1
• /
• pp.28-32
• /
• 2009

The bacterial toxin, tolaasin, causes brown blotch disease on the cultivated mushrooms by collapsing fungal and fruiting body structure of mushroom. Cytotoxicity of tolaasin was evaluated by measuring hemolytic activity because tolaasins form membrane pores on the red blood cells and destroy cell structure. While we investigated the inhibitions of hemolytic activity of tolaasin by $Zn^{2+}$ and $Cd^{2+}$, we found that $Ni^{2+}$ is another antagonist to block the toxicity of tolaasin. $Ni^{2+}$ inhibited the tolaasin-induced hemolysis in a dose-dependent manner and its Ki value was $\sim10$ mM, implying that the inhibitory effect of $Ni^{2+}$ is stronger than that of $Cd^{2+}$. The hemolytic activity was completely inhibited by $Ni^{2+}$ at the concentration higher than 50 mM. The effect of $Ni^{2+}$ was reversible since it was removed by the addition of EDTA. When the tolaasin-induced hemolysis was suppressed by the addition of 20 mM $Ni^{2+}$, the subsequent addition of EDIA immediately initiated the hemolysis. Although the mechanism of $Ni^{2+}$ -induced inhibition on tolaasin toxicity is not known, $Ni^{2+}$ could inhibit any of fallowing processes of tolaasin action, membrane binding, molecular multimerization, pore formation, and massive ion transport through the membrane pore. Our results indicate that $Ni^{2+}$ inhibits the pore activity of tolaasin, the last step of the toxic process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.3
• /
• pp.279-284
• /
• 2015

As non-conventional oil resources such as shale gas have been widely developed, proper treatment of flowback and produced water is becoming important. However, application of conventional water treatment techniques is limited due to high concentration of pollutants such as oil and grease, organics, harmful chemicals, and inorganic ions. In this study, we examined the feasibility of using forward osmosis (FO) and air gap membrane distillation (AGMD) as novel treatment options for shale gas wastewater. Laboratory-scale FO and MD devices were fabricated and used for the experiments. Results showed that FO could be used to treat the synthetic wastewater. Using 5 M NaCl as the draw solution, the flux was approximately $6L/m^2-hr$ during the treatment of low range wastewater (TDS: 66,000 mg/L). Nevertheless, AGMD was more effective to treat high range wastewater (Total Dissolved Solid: 260,000 mg/L) than FO.

• The Korean Journal of Zoology
• /
• v.31 no.4
• /
• pp.273-282
• /
• 1988

생쥐에 PMSG와 hOG를 주사한 후 난자-난구복합체의 미세구조의 변화를 환찰함으로세 난구세포의 분산현상을 규명하고자 본 실험을 행하였다. 난자는 PMSG 주사후 48시간까지 별 다른 변화가 없었고 다만 표면막에 miGrOVilli와 Coaled pit의 수가 감소하는 경향을 보였다. 그러나 PMSG-hCG주사 12시간 후에 배란된 난자의 표면은 microvilli와 coated pit가 사라져서 평평하게 되었다. 방사관세포는 PMSG주사 48시간 후메 밀착해 있던 투명대와 간격이 생기기 시작하였고, 투명대를 통관하여 난자의 표면막과 desmosome으로 연결되어 있던 세포질돌기도 퇴화의 징후를 보였다. PMSG-hCG주사 후에는 급속히 격리, 분산되고 세포질돌기는 퇴화하였으며 dermo-some도 사라겼다. 난구세포들은 대조군에서 밀집되어 있었고 거의 gap junction으로 연결되어 있었는데, PMSG주사 24시간 후에는 모양이 등글게 되고 더욱 밀집되었으며, 48시간 후에는 거의 loose junction으로 연결되었고 분산되기 시작하였다. 결국 PMSG-hCG주사 If시간 후에는 완전히 분산되었고 거의 모두 핵응축과 괴사현상을 보였다. 난자- 난구 복합체의 분산은 배란전에 PMSG에 의하여 시작되고 hCG에 의하여 촉진 완결된다는 것이 확실하다. The ultrastructural changes of the oocyte-cumulus complexes of mouse alter injection of PMSG and hOG have been investigated in order to elucidate expansion phenomenon of the cumulus cells. The oocytes until 48 hours after PMSC injection showed no change except a tendency of decrease in numbers of microvilli and the coated pelts on surface membrane. However, surface membrane of the ovulated oocytes 12 hours after PMSC-hCC injection changed to be smooth due to disapperance of microvilli and coated pits. Corona radiate cells tightly attaching to zona pe]lucida 48 hours after PMSC injection began to be detached and their cytoplasmic processes connected by desmosome to oocyte surface membrane showed a degeneration symptom. Thereafter the detachment and degeneration were accelerated by hCG injection and followed by disappearence of desmosome. The cumulus cells in control group were compacted and connected by almost 9aP junction each another. Ite cumulus cells 24 hours after PMSG injection were changed to be round form and more tightly compacted. However, the cumulus cells 48 hours after PMSG injection were connected by almost loose junction and showed the beginning of expansion. Eventuallv, the cumulus cells 12 hours a%or PMSG-hCG injection were completely expanded, and became pvknotic and necrotic in most It is clear that the expansion of oocyte-cumulus complex were initiated by PMSC, then accelerated and completed by hCG before ovulation.

• The Korean Journal of Zoology
• /
• v.26 no.3
• /
• pp.155-170
• /
• 1983

The primary concern has been focused on the response and adaptation of mouse fibroblast tumor cells to heat-shock in the level of membrane surface proteins, using two labeling techniques, lactoperoxidase-catalyzed iodination and galactose oxidase-sodium borohydride. Cells arrested in $G_1$ phase exhibited the highest level of LETS protein and high molecular proteins than did cells passing through $G_1/S, S, G_2$ and M, and unsynchronized cells. Confluent cells were found to show an increase in 125K proteins and a decrease in 130K and 100K proteins selectively. The adaptation processes of tumor cells after heat-shock were observed. All the proteins above 80K were reduced immediately after heat-shock, whereas 70K protein increased markedly 24 hours after heat-shock. The 70K protein and high molecular proteins returned to normal level in 48 hours. The 70K protein was found to be trypsin-sensitive and was similarly labeled by galactose-oxidase as well as by lactoperoxidase. It was, therefore, concluded that 70K protein is glycoprotein located on the surface membrane and might be the HSP 70. Possible function of heat-shock protein on the surface membrane and the relation of this protein to differential heat-sensitivity of tumor cells are discussed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.5
• /
• pp.471-478
• /
• 2010

Thin films play an important role in many technological applications including microelectronic devices, magnetic storage media, MEMS and surface coatings. It is well known that a thin film's material properties can be very different from the corresponding bulk properties and thus there has been a strong need for the development of a reliable test method to measure the mechanical properties of a thin film. We have developed an alternative and convenient test method to overcome the limitations of previous membrane deflection experiment and uniaxial tensile test by adopting a white light interferometer having sub-nanometer out-of-plane displacement resolution. The freestanding aluminium specimens are tested to verity the effectiveness of the test method developed and get the tensile properties. The specimens are 0.5 rum wide, $1{\mu}m$ thick and fabricated through MEMS processes including sputtering. 1 to 5 specimens are fabricated on Si dies. The membrane deflection experiments are carried out by using a homemade tester consisted of a motor-driven loading tip, a load cell, and 6 DOF alignment stages. The test system is compact enough to set it up beneath a commercial white light interferometric microscope. The white light fringes are utilized to align a specimen with the tester. The Young's modulus and yield point stress of the aluminium film are 62 GPa and 247 MPa, respectively.

• Membrane Journal
• /
• v.11 no.3
• /
• pp.133-139
• /
• 2001

The hydorgen ions in PVA/SSA membranes were substituted with monovalent metal ions, $Li^{+}$, $Na^{+}$, $K^{+}$, divalent metal ion forms, $Mg^{2+}$, $Ca^{2+}$, $Ba^{2+}$, trivalent metal ion forms, $Al^{+}$. The effect of exchange with metal ions was investigated through the swelling measurement and pervaporative experiments for water-ethanol and water-methanol mixtures at various operating conditions. In addition, ESCA analysis was carried out to study the substitution of the metal ions in membranes. The swelling ratio decerased in the sequence of $Li^{+}$, $Na^{+}$, $K^{+}$ and this might be due to the 'salting-out` effect while the swelling ratios for divalnet and trivalent ion-substituted membranes were affected by the combined effect of salting-out, electrostatic crosslinking and extent of metal ion substitution. For the pervaporation performance, PVA/SSA-$H^{+}$membrane showed the lowest flux and highest separation factor for all aqueous ethanol solutions. The typical results of the flux, 59 g/$m^{2}$hr and the separation factor, 44 were obtained at $50^{\circ}C$ for 90% ethanol aqueous mixture. For water-methanol solutions, the PVA/SSA membranes substituted with monovalent PVA/SSA membranes substituted with divalent and tribalent metal ions, both `salting-out` and electrostatic effects affected the pervaporative results.

• Animal cells and systems
• /
• v.2 no.1
• /
• pp.1-8
• /
• 1998

Hepatocyte growth factor (HGF), originally discovered and cloned as a powerful mitogen for hepatocytes, is a four kringle-containing growth factor which specifically binds to membrane-spanning tyrosine kinase, c-Met/HGF receptor. HGF has mitogenic, motogenic (enhancement of cell movement), morphogenic (e.g., induction of branching tubulogenesis), and anti-apoptotic activities for a wide variety of cells. During embryogenesis, HGF supports organogenesis and morphogenesis of various tissues, including liver, kidney, lung, gut, mammary gland, and tooth. In adult tissues HGF elicits an organotrophic function which supports regeneration of organs such as liver, kidney, lung, and vascular tissues. HGF is also a novel member of neurotrophic factor in nervous systems. Together with the preferential expression of HGF in mesenchymal or stromal cells, and c-Met/HGF receptor In epithelial or endothelial cells, the HGF-Met coupling seems to orchestrate dynamic morphogenic processes through epithelial-mesenchymal (or-stromal) interactions for organogenesis and organ regeneration. HGF or HGF gene may well become unique therapeutic tools for treatment of patients with various organ failure, through its actions to reconstruct organized tissue architectures. This review focuses on recently characterized biological and physiological functions integrated by HGF-Met coupling during organogenesis and organ regeneration.