• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권2호
• /
• pp.764-784
• /
• 2017

Energy efficiency is an essential requirement in designing a MAC protocol for wireless sensor networks (WSNs) using battery-operated sensor nodes. We proposed a new receiver-initiated MAC protocol, RIX-MAC, based on the X-MAX protocol with asynchronous duty cycles. In this paper, we analyzed the performance of RIX-MAC protocol in terms of throughput, delay, and energy consumption using the model. For modeling the protocol, we used the Markov chain model, derived the transmission and state probabilities, and obtained the equations to solve the performance of throughput, delay, and energy consumption. Our proposed model and analysis are validated by comparing numerical results obtained from the model, with simulation results using NS-2.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권5호
• /
• pp.1604-1617
• /
• 2014

This paper proposes RIX-MAC (Receiver-Initiated X-MAC), a new energy-efficient MAC protocol based on an asynchronous duty cycling. RIX-MAC improves energy efficiency through utilizing short preambles and adopting the receiver-initiated approach, where RIX-MAC minimizes sender nodes' energy consumption by enabling transmitters to predict receiver nodes' wake-up times. It also reduces receiver nodes' energy consumption by decreasing the number of control frames. We use the network simulator to evaluate RIX-MAC's performance. Compared to the prior asynchronous duty cycling approaches of X-MAC and PW-MAC, the proposed protocol shows a remarkable improvement in energy-efficiency and end-to-end delay.

• Journal of information and communication convergence engineering
• /
• 제5권3호
• /
• pp.200-204
• /
• 2007

The release of IEEE 802.15.4 PHY-MAC standard represents a milestone in developing of commercial wireless sensor network pursuing low power and low cost. In this paper, IEEE 802.15.4 Medium Access Control (MAC) protocol was analysed at the point of power consumption. This analysis measured the amount of the rest of power after transmitting data with beacon enabled mode and the power consumption of each node in the time period. ns-2 simulation is used to verify the analysis.

• 한국시뮬레이션학회논문지
• /
• 제14권3호
• /
• pp.101-108
• /
• 2005

IEEE 802.15.4 low-rate Wireless Personal Area Networks (WPAN) are expected to provide ubiquitous networking between small personal/home devices and sensors with low power consumption and low cost features. The technology employs special CSMA/CA (Carrier Sense Multiple Access/collision Avoidance) to save power consumption for small or portable WPAN-enabled devices. In this paper, we simulation the slotted CSMA/CA of IEEE 802.15.4 MAC and evaluate its performance limit in order to grasp the characteristics of Medium Access Control (MAC) of IEEE 802.15.4 WPAN.

• 제어로봇시스템학회논문지
• /
• 제12권12호
• /
• pp.1184-1190
• /
• 2006

Most chemical companies try to maximize their energy efficiencies due to high oil price and reinforcement of environmental regulation. An individual factory continuously has tried to reduce energy consumption or carbon dioxide discharge for high profit. Nevertheless, it is found that waste heat is disposed with forms of low or medium pressure steams. It can be improved by the aspect of entire industrial complex. Therefore, we have developed a steam network optimization method using Steam Networking Matrices(SNMs) in this research. Results from an illustrative example show that energy consumption can be reduced by optimizing steam exchange networks.

• 설비공학논문집
• /
• 제24권4호
• /
• pp.343-350
• /
• 2012

The major goal of building energy management is to minimize the energy consumption while maintaining the comfortable environment condition. Nowadays building energy management to save HVAC energy and so on is the most critical issue for existing building service branch with high efficiency equipments and their optimal operation. The effects on the building energy savings of the building equipment retrofit and the improvement of its operation method, especially in the field of HVAC system, were analyzed in this study for domestic small and/or medium sized buildings. Over 8.8% of energy saving was achieved compared withe total energy consumption in commercial building. These results could be used for reasonable maintenance and efficient management of the various building service equipments and related systems.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2005년도 춘계학술대회 논문집
• /
• pp.10-14
• /
• 2005

IEEE 802.15.4 low-rate Wireless Personal Area Networks(WPAN) are expected to provide ubiquitous networking between small personal/home devices and sensors with low power consumption and low cost features. The technology employs special CSMA/CA (Carrier Sense Multiple Access/collision Avoidance) to save power consumption for small or portable WPAN-enabled devices. In this paper, we simulation the slotted CSMA/CA of IEEE 802.15.4 MAC and evaluate its performance limit in order to grasp the characteristics of Medium Access Control (MAC) of IEEE 802.15.4 WPAN.

• Journal of Information Processing Systems
• /
• 제6권4호
• /
• pp.501-510
• /
• 2010

Wireless sensor networks consist of sensor nodes which are expected to be battery-powered and are hard to replace or recharge. Thus, reducing the energy consumption of sensor nodes is an important design consideration in wireless sensor networks. For the implementation of an energy-efficient MAC protocol, a Sensor-MAC based on the IEEE 802.11 protocol, which has energy efficient scheduling, has been proposed. In this paper, we propose a Dynamic S-MAC that adapts dynamically to the network-traffic state. The dynamic S-MAC protocol improves the energy consumption of the S-MAC by changing the frame length according to the network-traffic state. Using an NS-2 Simulator, we compare the performance of the Dynamic S-MAC with that of the S-MAC protocol.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.569-572
• /
• 2000

This paper presents the optimized fabrication and thermal characteristics of micro-heaters for thermal MEMS applications using a SDB SOI substrate. The micro-heater is based on a thermal measurement principle and contains for thermal isolation regions a 10$\mu\textrm{m}$ thick silicon membrane with oxide-filled trenches in the SOI membrane rim. The micro-heater was fabricated with Pt-RTD(Resistance Thermometer Device)on the same substrate by using MgO as medium layer. The thermal characteristics of the micro-heater with the SOI membrane is 280$^{\circ}C$ at input Power 0.9 W; for the SOI membrane with 10 trenches, it is 580$^{\circ}C$ due to reduction of the external thermal loss. Therefore, the micro-heater with trenches in SOI membrane rim provides a powerful and versatile alternative technology for improving the performance of micro thermal sensors and actuators.

• 한국축산식품학회지
• /
• 제21권1호
• /
• pp.18-23
• /
• 2001

A total of 100 adults were surveyed on types of favorable meat products. They tended to show much of unsatisfactory on the market products. Those unsatisfactory were mostly conceptual such as instant products, unreliable raw materials, sanitation conditions, list of unfavorable ingredients, mix of harmful additives, and etc. The results indicated that the consumers purchased the products of ham, cheese, chicken, sausages, and canned products mostly at medium-large marts(56%), department stores(22%), retail stores(19%) and others(3%). They were also concerned with the distribution date, prices, shape of packaging, and etc. The types of products and frequencies of purchasing various products were varied by time. For the purchase of products, mixed items were more favored rather than the single items.