• YAKHAK HOEJI
• /
• v.37 no.5
• /
• pp.499-503
• /
• 1993

Betaine, a major component of Lycii Fructus, was evaluated for its anti-hepatotoxic activity on carbon tetrachloride-induced hepatotoxicity in primary cultured rat hepatocytes. Betaine was found to attenuate carbon tetrachloride-induced hepatotoxicity both morphologically and biochemically. Typical hepatocyte necrosis due to carbon tetrachloride seemed to be reduced by 50 to 500 $\mu{M}$ of betaine under microscopical observation. The value of glutamic pyruvic transaminase released from the hepatocytes into the medium significantly decreased as betaine concentration increased. Betaine also significantly elevated the reduced activities of some enzymes, cytochrome P-450, 7-ethoxycoumarin-0-deethylase and glutathione-S-transferase, involved in xenobiotic metabolism due to carbon tetrachloride-induced hepatotoxicity. These results demonstrate a possible hepato-protective role of betaine against fatty liver that could be easily induced by carbon tetrachloride.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.17-22
• /
• 2006

Shear modulus is directly linked to material's stiffness and is one of the most critical engineering parameters. Seismically, shear-wave velocity (Vs) is its best indicator. Although methods like refraction, down-hole, and cross-hole shear-wave surveys can be used, they are generally known to be tougher than any other seismic methods in field operation, data analysis, and overall cost. On the other hand, surface waves, commonly known as ground roll, are always generated in all seismic surveys with the strongest energy, and their propagation velocities are mainly determined by Vs of the medium. Furthermore, sampling depth of a particular frequency component of surface waves is in direct proportion to its wavelength and this property makes the surface wave velocity frequency dependent, i.e., dispersive. The multichannel analysis of surface waves (MASW) method tries to utilize this dispersion property of surface waves for the purpose of Vs profiling in 1-D (depth) or 2-D (depth and surface location) format. The active MASW method generates surface waves actively by using an impact source like sledgehammer, whereas the passive method utilizes those generated passively by cultural (e.g., traffic) or natural (e.g., thunder and tidal motion) activities. Investigation depth is usually shallower than 30 m with the active method, whereas it can reach a few hundred meters with the passive method. Overall procedures with both methods are briefly described.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.11
• /
• pp.1516-1523
• /
• 2004

The purpose of this study were to analyze the effect of weft knit structural characteristics on the subjective texture and sensibility. For this, the material was knitted into 8 kinds of weft plain knit fabrics with four kinds of fiber components such as wool, acryl, rayon, and nylon, 3 steps of densities and 3 steps of twist numbers to ply two yarns. The data were analyzed by factor analysis, ANOVA and multidimensional scaling. From factor analysis, subjective textures were categorized as 'bulk/resilience', 'surface/density' and 'soft/drape', and subjective sensibilities were categorized as 'natural/comfortable', 'feminine/elegance' and 'stable/neat' Among the knit structural characteristics, the component of fibers and the density of fabrics were the important factors to give variations in texture and sensibility : In comparison with wool knit of medium density, the knit fabrics of other components and different densities each showed a unique texture and sensibility. But twist number to ply two yams had a few influence on subjective properties. As a result of MDS analysis, the texture and sensibility of plain weft knit fabrics was classified as 'thin-full', 'hard-soft', 'young-old' and 'warm-cool'.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.2
• /
• pp.287-293
• /
• 2014

The physicochemical characteristics of 4 domestic wheat flour products were compared to those of 4 imported wheat flour products marketed in Korea. The contents of moisture, ash, protein, total dietary fiber (TDF), color (L, a, b), whiteness, solvent retention capacity (SRC), water absorption index (WAI), water soluble index (WSI), pasting characteristics by rapid visco analyzer (RVA), and principle component analysis (PCA) were analyzed. The domestic wheat flour products were composed of higher content in ash and protein, compared to the imported wheat flour products. The domestic wheat flour products had lower SRC and WSI characteristics than the imported wheat flour products. The values of lactic acid SRC (LASRC) in the imported wheat flour products showed an increasing trend as the protein content increased. The differences in viscosity were observed in the domestic wheat flour products. However, no major significant differences of viscosity were found among the imported wheat flour products. The result of PCA showed a consistent trend in the imported wheat flour (strong, medium, and weak), while a consistent trend was not shown in the domestic wheat flour products. Therefore, further research is needed to standardize the different types of domestic wheat flour products.

• Coupled systems mechanics
• /
• v.5 no.2
• /
• pp.101-126
• /
• 2016

Seismic structural fragility constitutes an important step for performance based seismic design. Lateral load-resisting structural members are often analyzed under one component base excitation, while the effect of bi-directional shaking is accounted per simplified rules. Fragility curves are constructed herein under real bi-directional excitation by a simple extension of the conventional Incremental Dynamic Analysis (IDA) under uni-directional shaking. Simple SODF systems, parametrically adjusted to different periods, are examined under a set of near-fault and far-fault excitations. Consideration of bi-directional interaction appears important for stiff systems. Further, the study indicates that the peak ground accelertaion, velocity and displacement (PGA, PGV and PGD) of accelerogram are relatively stable and efficient intensity measures for short, medium and long period systems respectively. '30%' combination rule seems to reasonably predict the fragility under bi-directional shaking at least for first mode dominated systems dealt herein up to a limit state of damage control.

• 연구논문집
• /
• s.32
• /
• pp.65-76
• /
• 2002

The intensity of x-ray or gamma-ray is attenuated according to density and thickness of the transmitted medium. In this study, by using this principle, on-line real-time radiometric system was developed using a 128 channels linear array of solid state detectors to measure wall thickness of insulated piping system. This system uses a Ir-192 as a gamma ray source and detector is composed of BGO scintillator and photodiode. Ir-192 gamma ray source and linear detector array mounted on a computer controlled robotic crawler. The Ir-192 gamma ray source is located on one side of the piping components and the detector array on the other side. The individual detectors of the detector array measure the intensity of the gamma rays after passing through the walls and the insulation of the piping component under measurement. The output of the detector array is amplified by amplifier and transmitted to the computer. This system collects and analyses the data from the detector array in real-time. The maximum measurable length of pipe is 120cm/mm. in the case of 1mm scanning interval.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.455-463
• /
• 2016

This paper proposes a compensation method to improve the distorted space vectors when a 3-level Neutral Point Clamped (NPC) inverter has an unbalanced neutral point voltage. Since both the neutral point voltage of the DC link and the space vector of a 3-level NPC inverter are closely related depending on the output load connecting state, a distorted space vector can occur when the neutral point voltage of a 3-level NPC inverter is unbalanced. The proposed method can improve the distorted space vectors by adjusting the injection time of the small and medium vectors and by modulating the amplitude of the carrier waveforms. In this paper, the proposed method is verified by both simulation and experimental results based on a 3-level NPC inverter.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.463-474
• /
• 2015

Future Ground Control Stations (GCSs) for Unmanned Aerial Vehicles (UAVs) teleoperation targets better situational awareness by providing extra motion cues to stimulate the vestibular system. This paper proposes a new virtual environment for long range Unmanned Aerial Vehicle (UAV) control via Non-Line-of-Sight (NLoS) communications, which is based on motion platforms. It generates motion cues for the teleoperator for extra sensory stimulation to enhance the guidance performance. The proposed environment employs the distributed component simulation over GSM network as a simulation platform. GSM communications are utilized as a multi-hop communication network, which is similar to global satellite communications. It considers a UAV mathematical model and wind turbulence effects to simulate a realistic UAV dynamics. Moreover, the proposed virtual environment simulates a Multiple Axis Rotating Device (MARD) as Human Machine Interface (HMI) device to provide a complete delay analysis. The demonstrated measurements cover Graphical User Interface (GUI) capabilities, NLoS GSM communications delay, MARD performance, and different software workload. The proposed virtual environment succeeded to provide visual and vestibular feedbacks for teleoperators via GSM networks. The overall system performance is acceptable relative to other Line-of-Sight (LoS) systems, which promises a good potential for future long range, medium altitude UAV teleoperation researches.

• Microbiology and Biotechnology Letters
• /
• v.26 no.1
• /
• pp.40-44
• /
• 1998

A Penicillium strain which produces $eta$-galactosidase with high transgalactosylation activity, was isolated from soil and registered as Penicillium sp, KFCC 10888. When $eta$-galactosidase from Penicillium sp. KFCC 10855 reacted with 40% lactose, transgalactosylation ratio reached up to 70% at the 73% conversion of initial lactose. The biosynthesis of the enzyme in Penicillium sp. KFCC 10888 was not induced by lactose. The soybean meal was an effective component of the culture medium. The optimum pH and temperature for transgalactosylation were 4.0 and 55$^{\circ}C$, respectively. The production of galactooligosaccharides was in proportion to the initial lactose concentration. When the enzyme reacted with 40% lactose (pH 4.0) at 55$^{\circ}C$, the concentration of galactooligosaccharides increased up to 40% of total solid concentration.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.2
• /
• pp.64-70
• /
• 2008

The UAV propulsion system that will be operated for long time at more than 40,000ft altitude should have not only fuel flow minimization but also high reliability and durability. If this UAV propulsion system may have faults, it is not easy to recover the system from the abnormal, and hence an accurate diagnostic technology must be needed to keep the operational reliability. For this purpose, the development of the health monitoring system which can monitor remotely the engine condition should be required. In this study, a fuzzy trend monitoring method for detecting the engine faults including mechanical faults was proposed through analyzing performance trends of measurement data. The trend monitoring is an engine conditioning method which can find engine faults by monitoring important measuring parameters such as fuel flow, exhaust gas temperatures, rotational speeds, vibration and etc. Using engine condition database as an input to be generated by linear regression analysis of real engine instrument data, an application of the fuzzy logic in diagnostics estimated the cause of fault in each component. According to study results. it was confirmed that the proposed trend monitoring method can improve reliability and durability of the propulsion system for a long endurance UAV to be operated at medium altitude.