• Journal of Broadcast Engineering
• /
• v.15 no.6
• /
• pp.749-756
• /
• 2010

The signal space diversity is one of the promising transmission techniques in next generation mobile TV service. However, DVB-T2 does not consider the multiple antennas (MIMO) so that the cyclic Q-delay method, a component interleaver in DVB-T2, causes a critical issue in detecting symbols at the receiver side by increasing the inter-symbol dependency. To solve this problem, the component-swapping technique is proposed, which limits the inter-symbol dependency in order to reduce detection complexity. In this paper, the achievable gain of a component-swapping technique combined with 16K LDPC code defined in DVB-T2 is evaluated by computer simulations. From the results, the gain is confirmed in terms of BER and receive complexity compared to legacy component interleaver methods.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.127-132
• /
• 2006

Quantization in video coding plays an important role in controlling the bit-rate of compressed video bit-streams. It has been used as an important control means to adjust the amount of bit-streams to at]owed bandwidth of delivery networks and storage. Due to the dependent nature of video coding, dependent quantization has been proposed and applied for MPEG-2 video coding to better maintain the quality of reconstructed frame for given constraints of target bit-rate. Since Scalable Video Coding (SVC) being currently standardized exhibits highly dependent coding nature not only between frames but also lower and higher scalability layers where the dependent quantization can be effectively applied, in this paper, we propose a dependent quantization scheme for SVC and compare its performance in visual qualities and bit-rates with the current JSVM reference software for SVC. The proposed technique exploits the frame dependences within each GOP of SVC scalability layers to formulate dependent quantization. We utilize Lagrange optimization, which is widely accepted in R-D (rate-distortion) based optimization, and construct trellis graph to find the optimal cost path in the trellis by minimizing the R-D cost. The optimal cost path in the trellis graph is the optimal set of quantization parameters (QP) for frames within a GOP. In order to reduce the complexity, we employ pruning procedure using monotonicity property in the trellis optimization and cut the frame dependency into one GOP to decrease dependency depth. The optimal Lagrange multiplier that is used for SVC is equal to H.264/AVC which is also used in the mode prediction of the JSVM reference software. The experimental result shows that the dependent quantization outperforms the current JSVM reference software encoder which actually takes a linear increasing QP in temporal scalability layers. The superiority of the dependent quantization is achieved up to 1.25 dB increment in PSNR values and 20% bits saving for the enhancement layer of SVC.

• 한국노년학
• /
• v.38 no.1
• /
• pp.203-223
• /
• 2018

This study examined the validity and the reliability of the perceived elderly stigma scale. Moreover, we investigated the relationships between the perceived elderly stigma and demographic factors (age, gender, education, and income). The initial scale consisted of 5 factors (ability, personality, appearance, authoritarian dependency, and child-obsession) and 28 items. In order to test the validity and the reliability of the scale, this study conducted a survey with 693 adults aged 18 to 65. Based on the confirmatory factor analysis (CFA), the scale was modified to 5 factors (ability, personality, appearance, authoritarian dependency, and child-obsession) and 15 items and its convergent validity and discriminant validity were confirmed. In terms of the relationships between the perceived elderly stigma and demographic factors, age had a negative relationship with the "ability" stigma, and education was a negatively associated with the "appearance" stigma.

• Journal of Digital Convergence
• /
• v.12 no.9
• /
• pp.297-312
• /
• 2014

By employing in-depth interviews with a total of 14 television producers, the study seeks to investigate how the use of documentary background music has changed in the rapidly evolving media technology. This study reveals two major findings. First, the use of traditional compositional background music in TV documentary has been decreased for the last 20 years, while library music with various sound sources has been more likely to be used due to its artistic value, its digitalized formats, and its convenience. Second, the popularity of the library music use has changed the cooperative relationship between TV documentary producers and music directors, and their views on background music. Overall, compared to the past, the new media technology (e.g., much easier, faster editing process and communication through e-mails) has helped to come up with the current trend of using more library music. This trend however implies that the dependency of library music only may lose the unique value of television documentary as a work of creative art and eventually downgrade the quality of the programs. Further practical implications are discussed.

• Journal of Information Technology Services
• /
• v.12 no.4
• /
• pp.449-459
• /
• 2013

The software which is used for electronic bulletin boards have shortcomings that the addition of new function and new information's type to the order point software is very difficult, and the aggressive adaption of newly introduced type of media is impossible because the software is developed by custom solution. Eventually new cost and time are required to enhance functionality or performance to software of DID(Digital Information Display). In this paper, we proposed the scheme to package DID's contents and to customize it using plug-in method. We conducted a case study of this scheme. The platform which can install Apps to DID as one of content was designed. Apps can be inserted by plug-in type on DID platform and run separately with DID framework. As a result, We got advantage that various contents, functions and Apps which are drived on Android can be displayed without any restriction and dependency because Apps itself is one of dynamic notice object. This solution increase reusability of Apps or contents, and can be used easily in various places such as airports, stations, terminals, and front desk by customizing.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.43-54
• /
• 2005

Care should be taken when performing the P and S wave velocity loggings. Some of them are the effect of casing that is installed to prevent the borehole collapsing when the drilling is done on the loose ground such as soil and/or soft rock, and the discrepancy of the velocities of the same media according to the difference of the source wave frequency spectrum. To overcome these difficulties, the following suggestions are recommended; (1) try a careful drilling technique that can eliminate the necessity of the casing, and (2) apply the logging methods with the proper frequency spectrum that is appropriate to the object of the velocity logging.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.11a
• /
• pp.226-227
• /
• 2014

We demonstrate nanoscale local anodic oxidation (LAO) patterning on few layer graphene using atomic force microscope (AFM) at room temperature and normal atmosphere. We focus on the humidity dependency in nanoscale oxidation of graphene. The relationship between the oxidation size and the AFM setting values, such as set point, tip speed, and humidity are observed. By changing these values, proper parameters were found to produce features on demand size. This technique provides an easy way to form graphene oxide lithography without any chemical resists. We have obtained oxidation size down to 50-nm with 6-nm-height oxide barrier line with $0.1{\mu}m/s$ tip scanning speed and micrometer size symbols on a graphene flake. We attribute the bumps to local anodic oxidation on graphene surface and combination of oxygen ions into the graphene lattice.

• Structural Engineering and Mechanics
• /
• v.64 no.3
• /
• pp.381-390
• /
• 2017

Present paper deals with the large amplitude flexural vibration of carbon nanotube reinforced composite (CNTRC) plates. Distribution of CNTs as reinforcements may be uniform or functionally graded (FG). The equivalent material properties of the composite media are obtained according to a refined rule of mixtures which contains efficiency parameters. To account for the large deformations, von $K{\acute{a}}rm{\acute{a}}n$ type of geometrical nonlinearity is included into the formulation. The matrix representation of the governing equations is obtained according to the Ritz method where the basic shape functions are written in terms of the Chebyshev polynomials. Time dependency of the problem is eliminated by means of the Galerkin method and the resulting nonlinear eigenvalue problem is solved employing a direct displacement control approach. Results are obtained for completely clamped and completely simply supported plates. Results are first validated for the especial cases of FG-CNTRC and cross-ply laminated plates. Afterwards, parametric studies are given for FG-CNTRC plates with different boundary conditions. It is shown that, nonlinear frequencies are highly dependent to the volume fraction and dispersion profiles of CNTs. Furthermore, mode redistribution is observed in both simply supported and clamped FG-CNTRC plates.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.118-123
• /
• 2009

In this paper, we propose packet selection and significance based interval allocation algorithm for real-time streaming service. In real-time streaming of inter-frame (and layer) coded video, minimizing packet loss does not imply maximizing QoS. It is true that packet loss adversely affects the QoS but one single packet can have more impact than several other packets. We exploit the fact that the significance of each packet loss is different from the frame type it belongs to and its position within GoP. Using packet dependency and PSNR degradation value imposed on the video from the corresponding packet loss, we find each packet's significance value. Based on the packet significance, the proposed algorithm determines which packets to send and when to send them. The proposed algorithm is tested using publicly available MPEG-4 video traces. Our scheduling algorithm brings significant improvement on user perceivable QoS. We foresee that the proposed algorithm manifests itself in last mile connection of the network where intervals between successive packets from the source and to the destination are well preserved.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.4
• /
• pp.142-151
• /
• 2023

Sentiment analysis is a method used to comprehend feelings, opinions, and attitudes in text, and it is essential for evaluating consumer feedback and social media posts. However, creating sentiment dictionaries, which are necessary for this analysis, is complex and time-consuming because people express their emotions differently depending on the context and domain. In this study, we propose a new method for simplifying this procedure. We utilize syntax analysis of the Korean language to identify and extract sentiment words based on the Reason-Sentiment Pattern, which distinguishes between words expressing feelings and words explaining why those feelings are expressed, making it applicable in various contexts and domains. We also define sentiment words as those with clear polarity, even when used independently and exclude words whose polarity varies with context and domain. This approach enables the extraction of explicit sentiment expressions, enhancing the accuracy of sentiment analysis at the attribute level. Our methodology, validated using Korean cosmetics review datasets from Korean online shopping malls, demonstrates how a sentiment dictionary focused solely on clear polarity words can provide valuable insights for product planners. Understanding the polarity and reasons behind specific attributes enables improvement of product weaknesses and emphasis on strengths. This approach not only reduces dependency on extensive sentiment dictionaries but also offers high accuracy and applicability across various domains.