• Journal of Life Science
• /
• v.23 no.1
• /
• pp.143-156
• /
• 2013

Due to the high incidence of cancer and cancer-related mortality in Korea, there is increased concern and psychological anxiety about this disease, leading to increasing numbers of cancer studies. Despite these, the trend of the cancer incidence rate has shown a significant increase. The detection of colorectal cancer, which has a high incidence rate, often tends to be delayed, causing a high mortality rate. Therefore, the prevention of colorectal cancer has become an important emergent issue. The cause of this cancer has not been confirmed. However, it may be attributable to westernized dietary patterns, which include consuming a high quantity of red meat. Consumption of dietary fiber promotes the production of butyrate short-chain fatty acids by enteric bacteria. In the treatment of cancer, anticancer medications have been shown to lead to the apoptosis of tumor cells, and a strong relationship between apoptosis mechanisms of tumor cells and cancer treatment has been confirmed. The results of many studies have confirmed that butyrate can directly promote the apoptosis of colorectal cancer cells. Therefore, increased consumption of dietary fiber, which promotes the production of butyrate shortchain fatty acids, can be expected to have an effect on the prevention and treatment of colorectal cancer.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.343-347
• /
• 1994

The effects of low and high-voltage-electrical-stimulation and storing temperature on concentration of adenosine triphosphate (ATP) related compounds were studied in M. Semitendinosus muscles from Korean native cattle. Seven beef carcasses were split, the one side was electrically stimulated for 1 minute by using stimulator adjusted to 400 V/60 Hz as high voltage or to 110 V/60 Hz as low voltage while the other side served as an unstimulated control. Both side samples were incubated at $5^{\circ}C\;and\;15^{\circ}C$ for 3 days. During storage, the concentration of ATP and its breakdown products were measured as a function of time. Significant differences (p<0.05) were observed in the variance of ATP, adenosine diphosphate (ADP) and inosine monophosphate (IMP) levels between low-or high-voltage-electrically stimulated muscles and unstimulated control at just after post-stimulation. The decomposition of adenosine compounds and the production of inosine compounds of low-voltage-electrically stimulated muscles were advanced more slowly than those of high-voltage-treatment muscles. With increasing storage time, the influence of electrical stimulation on changes of ATP related compounds in meat was decreased, but storing temperature begin to affect their concentration. Significant difference in the Hypoxanthine levels (p<0.05) was found of sample stored for 48 hours at $15^{\circ}C$ from samples stored at $5^{\circ}C$ regardless of electrical stimulation treatemt. IMP and inosine values in electrically stimulated muscles, higher than of a control during 72 hours of storage, indicated rapid production of flavor compounds in beef.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.4
• /
• pp.386-394
• /
• 2002

Carrying capacity model focused on interactions between the filter-feeder growth and their environments is presented, and differences among existing various carrying capacity models are reviewed. For carrying capacity modeling of shellfish system, we constructed a new numerical model coupled oyster growth model with an ecosystem model (EUTRP2). Physical and biological processes such as water transport and mixing, primary production, feeding and growth of the cultivated oyster, Crassostrea gigas and benthic-pelagic exchange were included in the model, Simulated results for validation showed that the more phytoplankton biomass decreased, the more oyster meat weight and nutrients increased, suggesting a powerful tool for reasonable management of shellfish aquaculture. The model was sensitive to parameters controlling the primary production. Among the ecosystem compartments, the oyster growth is highly influenced by small changes in the physiological parameters of phytoplankton and oyster. This sensitivity analysis indicated the importance of experimental data on biological parameters for calibration of the model.

• Journal of Animal Environmental Science
• /
• v.18 no.sup
• /
• pp.55-64
• /
• 2012

We investigated the effect of the clay mineral fortified with complex trace elements by specific fermentation microbes on growth performance and a quality of pork in this study. For the declared experimental animal, 80 heads of crossbred with Large White and Yorkshire were randomly splitted into a control group and a test group. Each group were assigned with 4 replicates and 10 heads of each replicate. When 0.3% of the fermentation product of the clay mineral (FCM) was added into feed stuff and fed for 9 weeks of experimental feeding period, the results of the feed intake, weight gains, pH of carcass, lightness of meat color, and brightness of the muscle semimembranosus were similar to those of the control group. However, dressing percentage, reddishness of carcass, and water holding capacity were improved, respectively, as much as 2.7%, 12%, and 10%, and reduced by 6% in cooking loss. In order to investigate the immune modulatory effect of fermented clay mineral, pheripheral blood mononuclear cells (PBMC) were isolated and Immune modulatory parameters were measured. The proliferation activity of PBMC from pigs fed the fermented clay mineral were significantly increased compared to control group pigs, and also those results were more clearly observed as activated with lipopolysaccharide and concanavaline A. The secretion of TNF-${\alpha}$ of the FCM group pigs showed an increasing tendency. Therefore it was suggested that the feeding of FCM which was high in cation metathesis and the value of infrared ray, activated the immune responses, and thus the production of the environment-friendly high quality pork without the use of antibiotics would be possible.

• Food Science of Animal Resources
• /
• v.30 no.2
• /
• pp.206-215
• /
• 2010

A total of 582 gilts and barrows were analyzed to investigate the regressive relationships to slaughter weight (SW) of variables related to production efficiency and pork quality. Average initial weights and SW were 88.6 and 122.5 kg, respectively, for gilts and 88.7 and 121.4 kg, respectively, for barrows. Average daily gain and gain:feed ratio were not affected by SW. Backfat thickness, which was significantly greater (p<0.01) in barrows (23.3 mm) than in gilts (20.7 mm), increased with increasing SW (0.21 mm/kg; p<0.001). When the 4-notch carcass yield and quality grades were quantified according to an arbitrary 1 point-per-1 notch scale, the former, but not the latter, regressed on SW (-0.64/10 kg; p<0.01). The percent yield of the belly per total lean (overall mean=20.7%) increased with increasing SW (0.37%/10 kg; p<0.001), whereas in other cuts, the SW effect was negligible. The redness of the loin also increased with increasing SW (p<0.05), but other physicochemical characteristics were minimally influenced by SW. In sensory evaluation, effects of SW for fresh and cooked loin, ham, and belly were mostly considered insignificant in terms of quality, albeit statistically significant in several cases. However, positive regressions on SW (p<0.01) of the marbling and acceptability scores of fresh loin as well as the fat:lean ratio of fresh belly were noteworthy. Collectively, SW of approximately 125 kg was maximal for both sexes under the current carcass yield grading, in which 94 kg is the upper weight limit for grade A carcass. However, if the carcass weight limit of the grading was to be removed or broadened, the SW for gilts (but not that for barrows because of their excessive fat content at above 125-kg SW) could be increased to 135 kg or greater without compromising carcass quality.

• Animal Bioscience
• /
• v.35 no.9
• /
• pp.1327-1339
• /
• 2022

Objective: Fat deposition in poultry is an important factor in production performance and meat quality research. miRNAs also play important roles in regulating adipocyte differentiation process. This study was to investigate the expression patterns of miRNAs in duck adipocytes after differentiation and explore the role of miR-214 in regulating carnitine palmitoyltransferases 2 (CPT2) gene expression during duck adipocyte differentiation. Methods: Successful systems for the isolation, culture, and induction of duck primary fat cells was developed in the experiment. Using Illumina next-generation sequencing, the miRNAs libraries of duck adipocytes were established. miRanda was used to predict differentially expressed (DE) miRNAs and their target genes. The expression patterns of miR-214 and CPT2 during the differentiation were verified by quantitative real-time polymerase chain reaction and western blot. Luciferase reporter assays were used to explore the specific regions of CPT2 targeted by miR-214. We used a miR-214 over-expression strategy in vitro to further investigate its effect on differentiation process and CPT2 gene transcription. Results: There were 481 miRNAs identified in duck adipocytes, included 57 DE miRNA candidates. And the 1,046 targets genes of DE miRNAs were mainly involved in p53 signaling, FoxO signaling, and fatty acid metabolism pathways. miR-214 and CPT2 showed contrasting expression patterns before and after differentiation, and they were selected for further research. The expression of miR-214 was decreased during the first 3 days of duck adipocytes differentiation, and then increased, while the expression of CPT2 increased both in the transcriptional and protein level. The luciferase assay suggested that miR-214 targets the 3'untranslated region of CPT2. Overexpression of miR-214 not only promoted the formation of lipid droplets but also decreased the protein abundance of CPT2. Conclusion: Current study reports the expression profile of miRNAs in duck adipocytes differentiated for 4 days. And miR-214 has been proved to have the regulator potential for fat deposition in duck.

• Animal Bioscience
• /
• v.35 no.9
• /
• pp.1340-1350
• /
• 2022

Objective: Luxi Black Head sheep (LBH) is the first crossbreed specialized for meat production and was developed by crossbreeding Black Head Dorper sheep (DP) and Small Tailed Han sheep (STH) in the farming areas of northern China. Research on the genomic variations and selection signatures of LBH caused by continuous artificial selection is of great significance for identifying the genetic mechanisms of important traits of sheep and for the continuous breeding of LBH. Methods: We explored the genetic relationships of LBH, DP, and several Mongolian sheep breeds by constructing phylogenetic tree, principal component analysis and linkage disequilibrium analysis. In addition, we analysed 29 whole genomes of sheep. The genome-wide selection signatures have been scanned with four methods: heterozygosity (H_P), fixation index (F_ST), cross-population extended haplotype homozygosity (XP-EHH) and the nucleotide diversity (𝜃_π) ratio. Results: The genetic relationships analysis showed that LBH appeared to be an independent cluster closer to DP. The candidate signatures of positive selection in sheep genome revealed candidate genes for developmental process (HoxA gene cluster, BCL2L11, TSHR), immunity (CXCL6, CXCL1, SKAP2, PTK6, MST1R), growth (PDGFD, FGF18, SRF, SOCS2), and reproduction (BCAS3, TRIM24, ASTL, FNDC3A). Moreover, two signalling pathways closely related to reproduction, the thyroid hormone signalling pathway and the oxytocin signalling pathway, were detected. Conclusion: The selective sweep analysis of LBH genome revealed candidate genes and signalling pathways associated with developmental process, immunity, growth, and reproduction. Our findings provide a valuable resource for sheep breeding and insight into the mechanisms of artificial selection.

• Clean Technology
• /
• v.25 no.3
• /
• pp.223-230
• /
• 2019

This research was performed to evaluate the characteristics of food waste from 5 areas in Gangwon Province, Korea and to predict the $CH_4$ gas production rate. Food wastes were sampled in July and September, 2017. The amount of methane gas generation was evaluated through the biochemical methane potential (BMP) test and a calculation method using chemical composition. Average bulk density and pH of the food wastes were in the range of $0.758{\sim}0.850g\;cm^{-3}$ and 4.29 ~ 4.75, respectively. By physical composition, vegetables were the highest with 56.43 ~ 72.81% with fruits recording 5.31 ~ 8.95%, cereals 1.60 ~ 18.73%, fish and meat 4.47 ~ 12.11%, and filtrate 1.76 ~ 3.64%. The average water content was 69.30 ~ 75.87%, and VS and ash content were 22.50 ~ 27.98% and 1.63 ~ 2.48%, respectively. In addition, $BOD_5$, $COD_{Cr}$, and $COD_{Mn}$ were in the ranges of $17,690.3{\sim}33,154.9mg\;L^{-1}$, $106,212.3{\sim}128,695.5mg\;L^{-1}$, and $51,266.1{\sim}63,426.3mg\;L^{-1}$, respectively. The NaCl content ranged from 0.81 to 1.17%. The results of elemental analysis showed that the contents of C, H, O, N, and S were 44.87 ~ 48.1%, 7.12 ~ 7.57%, 40.13 ~ 43.78%, 3.22 ~ 4.14%, and 0.00 ~ 0.02%, respectively. In a comparison of the methane production yield per VS mass of food waste, there was no significant difference between the cumulative amount (${0.303{\sim}0.354m_{CH4}}^3\;{kg_{VS}}^{-1}$) by the BMP test and the theoretical amount (${0.294{\sim}0.352m_{CH4}}^3\;{kg_{VS}}^{-1}$) calculated by chemical composition.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.577-584
• /
• 2018

This study was conducted to investigate the potential of chicken feather (CF), which is a by-product in poultry industry, as a partial substitute of wood fiber in the production of wood-based fiberboard. Keratin-type protein constituted the majority of CF, and its appearance did not differ from that of wood fiber. When the formaldehyde (HCHO) adsorptivities of CF compared by its pretreatment type, feather meal (FM), which was pretreated CF with high temperature and pressure and then grounded, showed the highest HCHO adsorptivity. In addition, there was no difference between the adsorbed HCHO amounts, which was measured by dinitrophenylhydrazine method, of scissors-chopped CF and CF beated with an electrical blender. Mechanical properties and HCHO emission of medium-density fiberboards (MDF), which were fabricated with wood fiber and 5 wt% CF, beated CF or FM based on the oven-dried weight of wood fiber, were not influenced by the pretreatment type of CF. However, when the values compared with those of MDF made with just wood fiber, thickness swelling and HCHO emission of the MDF were improved greatly with the addition of CF, beated CF or FM. Based on the results, it might be possible to produce MDF with improved dimensional stability and low HCHO emission if CF, beated CF or FM is added partially as a substitute of wood fiber in the manufacturing process of MDF produced with the conventional urea-formaldehyde resin of $E_1$ grade. However, the use of CF or FM in the production of MDF has a low economic feasibility at the current situation due to the securing difficulty and high cost of CF. In order to enhance the economic feasibility, it requires to use CF produced at small to medium-sized chicken meat plants. More importantly, it is considered that the technology developed from this research has a great potential to make provision for the prohibition of animal-based feed and to dispose environmentally avian influenza-infected poultry.

• Journal of Food Hygiene and Safety
• /
• v.23 no.3
• /
• pp.248-256
• /
• 2008

To investigate the epidemiological characteristics of 68 Listeria monocytogenes isolates, including 11 reference strains and 57 isolates from imported US beef, domestic meats(beef, pork, chicken meat), raw milk, and milk plants. L. monocytogenes was to evaluate the production of virulence proteins, such as hemolysin(LLO) and lecithinase(LCP), the adsorption of Congo red(CRA), and to detect virulence genes using the polymerase chain reaction(PCR). In the study of virulence protein production, 68(100%), 62(91.2%), and 54(79.4%) of the 68 L. monocytogenes strains were positive for LLO production, the LCP test, and the CRA test, respectively, while strains of other species, such as L. innocua, L. gray, L. murrayi, and L. welshimeri, were not. There were no significant differences between L. monocytogenes serotypes and the ability to produce LLO or LCP. L. monocytogenesstrains had very high hemolytic titers(2 to 16 fold), while the other Listeria species, other than L. ivanovii and L. seeligeri, did not. The hemolysin activities of L. monocytogenes, L. ivanovii, and L. seeligeri usually exceeded 1.0 HU/mg, while those of other Listeria spp. were less than 0.04 HU/mg. In the PCR assay, all of the L. monocytogenes strains contained the hlyA, plcA, plcB, inlA, and inlB virulence genes and produced a product of the expected size. In the PCR of the actA gene, the expected 385-bp product was seen in 39(57.4%) L. monocytogenesstrains, while an unexpected 268-bp product was seen in 29(42.6%) strains. Most L. monocytogenes strains isolated from Hanwoo beef produced the 385-bp actA gene product, while strains of imported US beef usually produced the 268-bp actA gene product. By contrast, no virulence gene products were amplified in the other Listeria spp.