• Journal of Korea Port Economic Association
• /
• v.19 no.2
• /
• pp.221-239
• /
• 2003

In the last decade, the issue of supply chain management(SCM) has emerged as a significant topic in the logistics literature in the developed countries. Also recently the concept of SCM has generated considerable interest in korean firms. However, there has been little systematic analysis of the experience of those companies that have used such SCM philosophy. This paper studies introduction and Application of Korean Trading Companies using SCM philosophy. This study forcuses on how Korean firms can use the SCM by reinforcing their logistics systems. The objectives of this paper are. 1. To develop an understanding of the forces that have created an interest in SCM. 2. To examine the obstacles encountered in implementing SCM. 3. To suggest the impact of the use of SCM and the directions for institutional Development.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.2
• /
• pp.65-72
• /
• 2000

콘크리트 구조물이 지진 등으로 손상을 입었을 때 그 내부 상태를 파악하는 일은 구조물의 안전성 판단에 필요한 중요 과정중 하나이다 손상도 파악에 사용되는 비파괴 검사 방법 중 레이더법은 현재 콘크리트 부재의 두께와 매립된 철근 및 공동 탐사에 적용되고 있다 레이더법은 다른 비파괴 검사 방법에서와 마찬가지로 측정된 신호의 처리와 해석에 따라 그 결과가 좌우된다 . 이논문에서는 상용 레이더 시스템에서 얻어지는 화상 데이트터를 개선하는 방법을 개발하여 철근이 매립된 콘크리트 시편에 적용하였다 실험에 사용된 기편의 크기는 1,000mm(길이)$\times$600mm (폭) $\times$140mm(두께) 이고 철근의 매립깊이는 표면으로부터 철근 중심까지 60mm 이다 레이더 실측 실험에서 철근의 수평배근 간격을 60 90, 120, 150 mm 로 변화시켜 간격탐사가능성을 시험하였다 결과적으로 상용 시스템에 비해 샹상된 판별효과를 나타냈으며 배근 간격이 90, 120, 150mm 인 시편에서 그 간격을 정확히 찾아내었다.

• The Korean Journal of Mycology
• /
• v.19 no.1
• /
• pp.47-53
• /
• 1991

Metaboilc parameters were obtained from the measurment of productivities of carbon dioxide on the sawdust medium. The productivites of carbon dioxide obtained during fourteen days' incubation were employed for the fungal biomass, representing the fungal growth, and applied for understanding the physioligical parameters on the sawdust medium. The role of rice bran, commonly employed in the conventional spawn medium was speculated to be three kinds of nutrients of starch, nitrogen source, and and minerals. Biologically, the role of rice bran was considered to be the fast growing agents which led to prevention of other microorganisms.

• Korean Journal of Microbiology
• /
• v.26 no.4
• /
• pp.339-347
• /
• 1988

The rate of bacterial degradation of hydrocarbon was estimated for the measurment of the self-purification capacity of the aquatic ecosystem. Strain ND601P-2, selected as petroleum degrading bacteria from Nakdong River Estuary with high degradability of petroleum, transformed 42% of hexadecane to $CO_{2}$ or cell mateials under the conditions of $25^{\circ}C$, 0.03M NaCl, 167mg-$NH_{4}^+/1, 950 mg-PO_{4}^{3-}$/1, 50 mg-hexadecane/1. The mineralization rate was found to be significantly affected by the temperature and the $Q_{10}$ value was 2.2. Teh optimal salinity of the strain ND601P-2 was 2o/oo. The increased salinity caused the elevation of % respiration value and the prolonged lag phase.

• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.787-794
• /
• 1995

To improvement the magnetic and frequency properties of YIG(Yttrium-Iron Garnet) in microwave region, it is investigated that the effect of $Al^{3+}$ ions on magnetic and frequency characteristics of YIG, using samples of basic YIG composition( $Y_{3}$F $e_{5}$ $O_{l2}$) added with A1$_{2}$ $O_{3}$ from 0 to 2.5 [mol%]. The measurment is conducted mainly for the structural properties and magnetical properties. The structural properties is measured using SEM(Scanning Electro Microscope), EDX(Energy-dispersive X-ray spectrometer) and XRD(X-ray diffraction equipment). The magnetical properties is measured with B-H curve tracer and impedance analyzer. As a result, it is confin-ned that the effect of eddy current loss is minimized while maintaining high saturation flux density of YIG, when YIG is added with 0.5 [mol%] of A1$_{2}$ $O_{3}$.>.>.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.114-115
• /
• 2015

개량한 플라즈마 소스를 이용하여 Al doped ZnO (AZO) 박막을 증착하였다. 이 실험에서 박막의 증착두께를 200nm로 고정하였고 공정압력과 기판사이 거리는 4 mTorr과 4 cm로 정하였다. 인가전력 그리고 윗 타겟 인가전압을 변수로 하였을 경우 AZO 박막의 방향성과 결정성을 XRD로 측정하고 분석하였고 박막의 전기적 특성을 Hall measurment로 측정하였다. 그 결과 인가파워가 2W/cm2, 윗 타겟 인가전압이 0 W 일 때 박막의 전기적 특성이 가장 좋게 나타났다.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1041-1043
• /
• 1993

A robust position control scheme for a Brushless Direct Drive Motor(BLDDM) is presented. To obtain the robustness under the load variation, a Variable Structure Controller(VSC) is used. However, the VSC has a chattering problem and require the full state informations. To overcome this problem, in this paper, the sliding mode observer is used for compensating the load disturbance and estimating the motor velocity. As a result, the VSC for a BLDDM posision control is designed by using only position measurment and the chattering problem is greatly reduced. To show the validaty of the proposed scheme, the simulation study is carried out.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1992.07a
• /
• pp.17-17
• /
• 1992

In this talk, our recent progress in experiment study on microscopic surface phonons has been reviewed. After the brief introduction concerning the concept of surface phonons, exprimental apparatus of HREELS and the principle of the measurment for surface phonon dispersions, I show the experimental data of some solide surfaces. The following points are discussed ; (1) lattice dynamical analysis of the phonon dispersions of some transi tion metal carbide (100) surfaces indicates the large changes in the force constant near the surface, which is consistent wi th a rippled structure of a topmost layer. (2) the phonon dispersions of a graphite overlayer show the modified phonon structure, which indicates that the thickness of the overlayer is one atomic layer, and in addition, the electronic structure is also modified. (3) The phonon structure of $LaB_6$ (100) surface is discussed. Lastly I telJ about new technology of extreme high vaccum less than $10^{-10}$ Pa.EX> Pa.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.4
• /
• pp.131-137
• /
• 2001

This paper discussed to the ATM traffic measurement and analysis tool for analyzing the ATM traffic properties. This tool was applied at the ATM commercial network. The analysis result is verified effectivity to improve network resource from 20％ to 50％. Thus, this tool usefully can be used to network plan for the network expansion and new network building. Also, it can be used to the demand estimation of the ATM network traffic.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.507-510
• /
• 1995

A heat-treatment method of pre-annealing and then flash annealing(FA) has been used to improve the soft magnetic properties of nanocrystalline $Fe_{76}CuSi_{13}B_{10}$ and $Fe_{74}CuNb_{3}Si_{12}B_{10}$ alloys. Outstanding magnetic properties of nanocrystalline $Fe_{74}CuNb_{3}Si_{12}B_{10}$ alloy were attained by flash-annealing in air after annealed at $500^{\circ}C$ for 0.5hr below the crystallization temperature. The same results were obtained for $Fe_{74}CuSi_{13}B_{10}$ alloy. The measurment of relief of stress and X-ray diffraction were used to analyze the effect of flashannealing.