• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.622-625
• /
• 2006

This study is a fundamental investigation for standardization of the heavy-weight floor impact measuring method by the impact ball. The distribution chrematistics of floor impact sound level and reverberation time in a receiving room of the testing building for floor impact sound were measured with variations of number and arrangement of the sound-absorbing materials. Total 8 cases were investigated. The distribution of the floor impact sound level($L_{i,\;Fmax}$) was measured at 30 points with same intervals. The absorption coefficient of the room is 0.10 in case of installation of 6 absorbing materials and 0.02 in case of non-installation. The distribution shape of the impact sound pressure level was similar to the result of the bang machine driving at the measured frequency range. However, the overall reduction of the impact sound level investigated in the 125 to 500 Hz shows that the sound absorption characteristics of the receiving room actually affects the result of the heavy-weight impact measurement.

• Applied Biological Chemistry
• /
• v.27 no.3
• /
• pp.146-150
• /
• 1984

Changes of weight loss and quality in 3 different apple cultivars and four storage conditions were investigated for 6 month storage. Weight loss changes in the pilot scale low temperature storage $(^{\circ}C)$ could be predicted with linear equations. Quality defects were remarkably increased at 5% of weight loss in all cultivars and storage conditions. It was possible to predict by linear equations the quality of apples by measuring acidity and texture highly correlated to the sensory scores.

• Journal of Environmental Science International
• /
• v.18 no.3
• /
• pp.255-261
• /
• 2009

We need water equivalent unit data of snowfall for the purpose of forecast and hydrology related research area. This study developed new method of automatic recording snowfall as weight unit. The instrument designed for measuring weight of snowfall by stain-gauge loadcell. Field test of instrument carried out at Daegwallyeong Obs. Station from 22 Jan. to 22 Feb. 2007. During observation period there is 15.3 cm snow depth and 16.0 mm of accumulated water equivalent depth at Daegwallyeong Obs. Station on 13 to 14 Feb. 2007. But the instrument of this study recorded 22.1 mm of water equivalent depth. It is not easy to explain difference between Daegwallyeong and this study. Because this study is only one case of comparison of snow measurement and there is very little amount of snow observation research. The density of snowfall calculated from 0.09 to $0.15g/cm^3$ from the observation data of 13 to 14 Feb. 2007. There is high relation between radar echo and snowfall amount measured by weight unit. It can supports forecast of snowfall and development of numerical model for forecast.

• Carbon letters
• /
• v.15 no.2
• /
• pp.129-135
• /
• 2014

Spinnable pitch for melt-electrospinning was obtained from pyrolized fuel oil by electron beam (E-beam) radiation treatment. The modified pitch was characterized by measuring its elemental composition, softening point, viscosity, molecular weight, and spinnability. The softening point and viscosity properties of the modified pitch were influenced by reforming types (heat or E-beam radiation treatment) and the use of a catalyst. The softening point and molecular weight were increased in proportion to absorbed doses of E-beam radiation and added $AlCl_3$ due to the formation of pitch by free radical polymerization. The range of the molecular weight distribution of the modified pitch becomes narrow with better spinning owing to the generated aromatic compounds with similar molecular weight. The diameter of melt-electrospun pitch fibers under applied power of 20 kV decreased 53% ($4.7{\pm}0.9{\mu}m$) compared to that of melt-spun pitch fibers ($10.2{\pm}2.8{\mu}m$). It is found that E-beam treatment for reforming could be a promising method in terms of time-savings and cost-effectiveness, and the melt-electrospinning method is suitable for the preparation of thinner fibers than those obtained with the conventional melt-spinning method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.314-320
• /
• 2014

Field balancing is required in any kind of phase information for the determination location balancing mass toward a rotor unbalance mass. Phase or phase angle is a measurement of the relationship of how one vibration signal which relates to another vibration signal and is commonly used to calculate the placement of balance weight. In this paper, A right guideline shows the photo optical speed sensor as the external keyphasor is a very useful when diagnosing machinery vibration problems on considering a phase lag comparing to the laser optical speed sensor. Some experimental results generate the interesting phase errors when appling to a wrong conditions. So, Usage of photo optical speed sensor which is used primarily to measure the shaft rotating speed serves as a reference for measuring vibration phase information has effect on the placement of phase angle how it was misunderstood. This paper will help a right method to search for the position of balancing weight and serves as baseline for further measurements using low cost and much easier user convenience. It is concluded that the propose baseline is likely to be applicable to apply to the practical field balancing weight.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.2
• /
• pp.101-107
• /
• 2015

Field balancing is required in any kind of phase information for the determination location balancing mass toward a rotor unbalance mass. Phase or phase angle is a measurement of the relationship of how one vibration signal which relates to another vibration signal and is commonly used to calculate the placement of balance weight. In this paper, A right guideline shows the photo optical speed sensor as the external KeyPhasor is a very useful when diagnosing machinery vibration problems on considering a phase lag comparing to the laser optical speed sensor. Some experimental results generate the interesting phase errors when appling to a wrong conditions. So, Usage of photo optical speed sensor which is used primarily to measure the shaft rotating speed serves as a reference for measuring vibration phase information has effect on the placement of phase angle how it was misunderstood. This paper will help a right method to search for the position of balancing weight and serves as baseline for further measurements using low cost and much easier user convenience. It is concluded that the propose baseline is likely to be applicable to apply to the practical field balancing weight.

• Child Health Nursing Research
• /
• v.8 no.2
• /
• pp.204-216
• /
• 2002

The purpose of this study was to investigate the effect of massage therapy on weight gain, length and head circumference in instituted infants. This study utilized nonequivalent control group with repeated measuring by quasi experimental design. Fifty eight instituted infants in Daejeon city were selected for the study. Fifty eight infants were randomly assigned two groups, one served as the control group and the other was experimental group to whom massage therapy was given. For the experimental group, massage protocol(developed by Field, 1986) was applied 2 times a day, mid-morning and early evening, for 4 weeks for each infants by researcher and trained research assistants. As a weight weighing instrument, electronic indicator scale (Cas Co., Korea) was used. The result of this study were summarized as follows; 1.A repeated measures ANOVA identified a significant group by time effect over the four weeks of intervention(F=14.69, p < .0001). Infants assigned to experimental group gained more weight than control group infants. 2. T-test identified that significant differences in length(t=2.60, P=.013) and head circumference(t=4.27, P=.000). Infants assigned to experimental group had more length and head circumference than control group infants. In conclusion, Massage therapy improved weight gain, length and head circumference of instituted infants. Therefore, it is recommended to utilize massage therapy as a nursing intervention for instituted infants.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.1 s.32
• /
• pp.154-168
• /
• 2007

Objective : The present study was carried out to investigate the preventive effect of Agrimonia pilosa Ledebour on Streptozotocin(STZ)-induced Diabetes mellitus. Method : Agrimonia pilosa Ledebour was given to rats with oral administration. The experimental animals were divided into 3groups : normal group of rats, control group of STZ-induced diabetic rats, sample group with Agrimonia pilosa Ledebour. The effect of Agrimonia pilosa Ledebour on STZ-induced diabetes was observed by measuring the survival rate of rats, weight of rats, FER, blood glucose, each organ weight of rat, total cholesterol, HDL, GOT, GPT & creatinine. Result : STZ caused hyperglycemia and hypoinsulinemia by a selectively destroying pancreatic ${\beta}-cell$. Agrimonia pilosa Ledebour treatment don't protected them from hyperglycemia and hypoinsulinemia. Organ weight only liver weight decreased but kidney, heart & spleen shows no significant changes. Agrimonia pilosa Ledebour significantly don't recoverd the increase of several biochemical parameters such as blood glucose, total cholesterol, HDL, GOT, GPT & creatinine is vice versa. Conclusion : Agrimonia pilosa Ledebour extract group did not show significant difference compared with STZ-induced Diabetes Mellitus group.

• Journal of muscle and joint health
• /
• v.12 no.2
• /
• pp.109-118
• /
• 2005

Purpose: The purpose of this study was to identify the effects of aquatic exercise program on pain, body weight, fatigue, flexibility in elderly women with osteoarthritis. Methods: The subjects of the study were sixty nine elderly women(age over 65years)who have an osteoarthritis. Aquatic exercise program consist of approximately one hour of exercise in water, two days per week, for six weeks. Data were gathered from September 2002 to August 2004 using a questionnaire and measuring body weight, flexibility of shoulder.. Data were analyzed with the SPSS Win 10.0 using frequency and paired t-test for differences between pre-exercise and post-exercise. Results: The results of this study are as follows: pain score, fatigue, body weight of post test were lower than those of pre test(t=5.587, p=0.000 ; t=3.394, p=0.001 ; t=4.664, p=0.000). Right and left flexibility scores of post test were better than those of pretest(Left: t=4.736, p=0.000 ; righrt: t=4.733, p=0.000). Conclusion: From these results, it is concluded that the aquatic exercise program can be effective in increasing physical and psychological function in elderly women.

• Transactions of Materials Processing
• /
• v.31 no.5
• /
• pp.281-289
• /
• 2022

Presently, 3D printers manufactured by material extrusion are economical and easy to use, so they are being used in various fields. However, this study conducted a tensile test on the infill pattern and density of the PLA+ material, due to the limitations of long printing time as well as low mechanical strength. The infill area for the infill density change was measured, using a vision-measuring machine for four infill patterns (concentric, zigzag, honeycomb, and cross) in which the nozzle path was the same for each layer. The tensile strength/weight[MPa/g] and tensile strength/printing time[MPa/min] of the tensile specimens were analyzed. In this study, efficient infill density and patterns are suggested, for cost reduction and productivity improvement. Consequently, it was confirmed that the infill area and infill percentage of the four patterns, were not constant according to the infill pattern. And the tensile strength of the infill density 40% of the honeycomb pattern and infill density 20% of the cross pattern, tended to highly consider the weight and printing time. Honeycomb and cross patterns could reduce the weight of the tensile specimen by 19.11%, 28.07%, as well as the printing time by 29.56%, 52.25%. Tensile strength was high in the order of concentric, zigzag, honeycomb, and cross patterns, considering the weight and printing time.