• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 하계학술발표회 논문집
• /
• pp.225-226
• /
• 2007

• The Korean Journal of Ceramics
• /
• 제3권2호
• /
• pp.105-109
• /
• 1997

The effects of surface conditions of the C-2 cemented carbide substrate on the adhesion of diamond film were investigated. The substrates were pretreated for different times with Murakami's reagent and then the acid solution of an H2SO4-H2O2. The adhesion strength was estimated by a peeling area around the Rockwell-A indentation. The cutting performance of the diamond-coated tools was evaluated by measuring flank wears in dry turning of Al-17% Si alloy. The morphology of deposited diamond crystallites was dominated by (111) and (220) surfaces with a cubooctahedral shape. The diamond film quality was hardly affected by the surface conditions of the substrate. The variation of tool life with longer substrate etching times resulted from a compromies between the increase of film adhesion at the interface and the decrease of toughness at the substrate surface. The coated tools were mainly deteriorated by chipping and flaking of the diamond film form a lock of adhesion strength, differently from the wear phenomena of PCD tools.

• 대한기계학회논문집A
• /
• 제28권7호
• /
• pp.986-991
• /
• 2004

For volumetric error measurement and calibration for machine tools, manufacturing machine or coordinate measuring machine (CMM), are studied using a Ball-bar artifact. A design of the Ball-bar is suggested manufactured by Invar, which is a low thermal expansion material, and precision steel balls. The uncertainty for the artifact method is discussed. A method of the Ball-bar artifact for obtaining 3-D position errors in CMM is proposed. The method of error vector measurement is shown using the Ball-bar artifact. Finally, the volumetric error is calculated from the error vectors and it can be used for Pitch error compensation in conventional NC machine and 3-D position Error map for calibration of NC machine tools.

• 보건의료산업학회지
• /
• 제6권3호
• /
• pp.219-229
• /
• 2012

In these days, the interest on medical industry is increasing around the world. This paper attempts to estimate the economic effects of the medical and measuring instrument industry through the Input-Output Analysis. Especially, 78*78 Sector Tables were used as the first analysis tool. So then, 79*79 Sector Tables adjusted were used for that industry. The main analysis tools of this study are comparing and analyzing backward and forward linkage effect, the induced effect of the self industry and other industries and the induced coefficients such as products, value-added, employee's pay, sales surplus, employment. According to the result of analysis, the medical and measuring instrument industry has great economic impacts which affects the major macroeconomic factors such as production and backward linkage effect. And the induced effects of the self medical and measuring instrument industry are significant compared to other industries in aspects of production, employee's pay and sales surplus.

• 한국산업융합학회 논문집
• /
• 제3권1호
• /
• pp.83-90
• /
• 2000

The purpose of this study is the development of CAM system which can machine and measure any shape by CNC lathe. The overall goal of the CAM system is to achieve the CNC lathe machining, from roughing through to final measuring, The hardware of the system comprises PC, CNC lathe and measuring tools. There are three steps in the CNC lathe machining and measuring, (1) geometric modeling by the shape patterns, (2) NC commands generation by the tool path compensated for tool nose radius, (3) machining and workpiece measuring on the lathe. It is developed a software package, with which we can conduct a micro CAM system in the PC without economical burden.

• 대한한의학회지
• /
• 제17권1호
• /
• pp.48-83
• /
• 1996

Our conclusions for function evaluation tools of Stroke patients are as follows. 1. Evaluating tools of Activities of Daily Living, Katz Index, Barthel Index, Modified Barthel Index have high validity and reliability because of ease of measuring, high accuracy, consistency, sensitivity and sufficient stastistics, but they mainly measure motor function except sense, mentation, language, and social conception. Therefore cerebrovascular disease and brain injury in trauma patients with lacked acknowledgement and sensation, we are not able to apply these tools. 2. PULSES Profile is a useful scale for measuring the patient's over-all status, upper and lower limb functions, sensory components, excretary functions, and intellectual and emotional adaptabilities. It is recognized as a good, useful tool to evaluate patient's whole function. 3. Motor Assessment Scale was designed to measure the progress of stroke patients. The scale was supplemented with upper arm function items. We believe that the Motor Assessment Scale could be a useful evaluation tool with inter-rater reliability ,test-retest reliability. 4. The existing evaluation tools, Katz Index, Barthel Index, Modified Barthel Index, PULSES Profile, Motor Assessment Scale, mainly measured the rehabilitational motor function of sequela of cerebrovascular patients. On the other hand CNS & INH stroke scale can measure cerebrovascular disease patient's neurologic deficits and over-all stautus, which are recognition ability, speech status, motor function, sensory function, activities of daily living. Those scales have been recognized as useful tools to measure function of cerebrovascular disease patients and have increased in use. 5. Every function evaluation tool was recognized to have some validity and inter-rater, test-retest reliability in items of each evaluation tool and total scores of each evaluation tools, but it is thought that none of these scales have been fully validated and proved reliable. Therefore afterward, the development of a highly reliable rating system may best be accomplished by a careful comparison of several tools, using the same patients and the same observers in order to choose the most reliable items from each. 6. Ideal evaluation tools must have the following conditions; (1) It should show the objective functional statues at the same time. (2) It should be repeated consecutively to know changed function status. (3) It should be easy to observe the treatment program. (4) It should have the same result with another rater to help rater exchange information with treatment team members. (5) It should be practical and simple. (6) The patient should not suffer from the observer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.92-96
• /
• 1993

Modern NC machine tools require a more and more exact monitoring and control of cutting process. A very important parameter is tool wear used to optimize cutting data and to change tools at the right time. In this study, a real-time multi-tool fracture method is proposed for measuring crater from fringe patterns generated by uni-shadow-moire. An optical technique using laser for non-contact measurement of tool fracture is presented. The technology in which the tool is illuminated by a beam of He-Ne laser and then the image of tool fracture CCD camera.

• 한국정밀공학회지
• /
• 제13권7호
• /
• pp.24-28
• /
• 1996

In this paper, a new measurement system has been developed for measuring servo errors of CNC machine tools. Unlike the ball link bar method using circular path, the developed system uses two orthogonal straight paths for measurement of errors, giving relatively short test length. For position measurment, linear displacement sensor and steel cube have been designed, and the software for relevant data sampling and error evaluation has been implemented.

• 대한인간공학회지
• /
• 제35권2호
• /
• pp.111-123
• /
• 2016

Objective: The objective of this research is to study preceding literature on safety culture surveying tools and indicators used in aviation organizations to help the further understanding of aviation safety culture by presenting Korea-Safety Culture Survey Indicator (K-SCSI) as a relevant case. Background: The aviation field puts a great deal of effort in preventive safety management through the application of Safety Management System (SMS), which was co-developed by international aviation organizations such as ICAO and FAA. To successfully operate safety management system, safety culture factors such as the organization member's level of consciousness, attitude and faith regarding safety must be put together. However, the aviation field currently lacks programs to promote safety culture and the exact understanding of some safety culture concepts. Method: This research inquired into the definition of safety culture in the aviation field and the surveying tools used to measure it. It then described the development and application process of the Korea-Safety Culture Survey Indicator (K-SCSI) mainly focusing on case studies. Results: In this research are presented safety culture promoting programs that can be applied to subordinate indicators of K-SCSI such as organization commitment, management involvement, rationality of reward system, employee empowerment and reporting system. Conclusion: For a mature safety culture to settle successfully, it is essential that safety culture survey indicators are developed and applied in a way that fits the organization's features. Also, behavior measuring indicators are required to develop a more objective indicator and thus must be standardized. Application: Cases that deal with the development and application of safety culture measuring tools within the aviation field can be studied and applied in other domains to spread safety culture.

• 한국기계가공학회지
• /
• 제18권2호
• /
• pp.22-28
• /
• 2019

In this study, we describe the mechanical design of the cylindrical workpiece inspection system which that can inspect the workpiece machined in the CNC lathe. The workpiece automatic measuring device is composed of a workpiece aligning mechanism, a workpiece diameter measuring mechanism, and a workpiece height measuring mechanism. If the workpiece machined on the CNC lathe is placed on the pedestal of the cylindrical workpiece inspection system, the workpiece aligning mechanism moves the workpiece to the diameter-measuring position and the height- measuring positions, and the diameter-measuring mechanism and the height- measuring mechanisms sequentially measure the diameter and the height of the workpiece. The cylindrical workpiece inspection system was designed and manufactured. The characteristic experiment was conducted to confirm the operation of the machine tool of the cylindrical workpiece inspection system. As a The result of the characteristic test shows that, the workpiece automatic measuring device operated safely.