• Korean Journal of Otorhinolaryngology-Head and Neck Surgery
• /
• v.60 no.3
• /
• pp.99-106
• /
• 2017

Listening effort is defined as a listener's mental exertion required to understand a speaker's auditory message, especially when distracting conditions are present. This review paper analyzed several subjective scaling tools used to measure the listening effort in order to suggest the best tool for use with hearing-impaired listeners who have to expend much effort even in everyday life. We first explained the importance of measuring listening effort and discussed various kinds of measurements. We then analyzed and categorized 15 recently published articles (i.e., from 2014 to 2016) into three topics: performance and listening effort, listening effort and fatigue, and clinical implication of listening effort. We compared the articles in terms of pros and cons and also identified 10 tools for use in the subjective scaling. Although none of these tools were unified or standardized easily, we concluded that 7-point scale would be the most reasonable as a less time-consuming measurement for compartmentalizing the degree of listening effort. If used with objective tools for measuring the listening effort, the subjective scaling could be a powerful tool for clinical use.

• Journal of Korean Academy of Nursing
• /
• v.30 no.5
• /
• pp.1121-1132
• /
• 2000

Service quality is, unlike goods quality, an abstract and elusive term. However, quality is very important to marketers and consumers in that it has many strategic benefits in contributing to profitability of marketing activities and consumers' problem-solving activities. The main purpose of this study is 1) to explore the differences of perception between consumers and providers about nursing service quality. 2) to identify the useful tool between two tools measuring nursing service quality. To achieve these purposes of the study, the questionnaire was developed and distributed to 210 nurses who worked at seven subjected hospitals in Seoul. Also, 280 people who had a direct experience with the subjected hospital nursing services at the time of screening were involved. They were randomly selected at the seven subjected hospitals during August to September of 1998. Among them, 165 responses from nurses and 229 responses from others resulted in worthy finds. The measurement instrument for a nursing services quality evaluation was modified from the SERVQUAL model originated from Parasuraman, Zeithaml, and Berry (1988). The reliability coefficient of the scale was calculated and showed high degree of internal consistency (Cronbachs' Alpha = .9353). For data analysis, SPSS/PC was used for descriptive statistics, t-test, ANOVA and regression analysis. The results were as follows : 1) In the perception about nursing services quality, there were gap between consumers and providers. Especially the critical attributes in point of perception nursing services quality, naming satisfy, hygiene and performance factors, are very different contents. 2) In the comparison analysis of the usefulness tools it was turned out that SEVPERF model is more appropriate than SERVQUAL model. And in the analysis to identify the construct validity of the tool, it is turned out that the relationship between the constructing factors of the tool and the general satisfaction is significant.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.165-171
• /
• 1998

• Journal of Society of Preventive Korean Medicine
• /
• v.17 no.1
• /
• pp.89-105
• /
• 2013

Objectives : The aim of this study is to analyze the domestic research trend focusing on well-being studies in medicine. Through this study, the researchers attempt to explore the research trends of the well-being in Traditional Korean Medicine. Methods : Well-being as a key word was searched on representative domestic databases of articles and the researchers collected the articles of medical journals published from 1980 to 2012. Finally 416 articles of well-being were selected. Results : Among the fields of medicine, well-being studies have been mainly proceeded by nursing science, preventive medicine and psychiatry. Well-being studies that mainly analyzed the variables associated wih quality of life and well-being to cancer patients, workers and elderly. But every measuring instrument searched with well-being was adapted from western tools. And there has not been any study used measuring instrument of well-being and interventions related to Traditional Korean Medicine. Conclusions : In order to handle the new wave of well-being and quality of life, research methods using tools to measure these variables need to be developed. Furthermore, it seems to be necessary that research on how to take advantage of Yangseng that is health concept of Traditional Korean Medicine.

• Korea Journal of Hospital Management
• /
• v.11 no.3
• /
• pp.42-55
• /
• 2006

The present study is designed to develop surveying tools to measure stressors of and social supports for Radiological Technologists which may play a role to alleviate their stresses caused from their job environments. For this purpose, an analysis of reliability by factors of personal stressors was conducted on 890 radiologists who are working at 44 general hospitals in 16 cities and provinces across the country. The results of the analysis may be summed up as follows: Six factors in 2 concerned fields turned out to be major tools for use as items of questionnaires to measure social supports for and organizational culture of Radiological Technologists. The factors determined to be applicable for survey with reliability coefficient of more than 0.7 measured by factors for internal coherence included social supports on the job(0.90), off-the-job social supports(0.81), job satisfaction(0.80), devotion for job by length of service(0.81) and emotional devotion for job(0.80), all deemed to be appropriate as survey items. In the verifying process of the results, it was found that normative devotion for job(0.61) showed lower reliability as its statistical coefficient was analyzed to be less than 0.7. It seemed, therefore, necessary to reconstruct items or re-select such ones only that can maintain internal coherence in order to analyze appropriateness of related measuring tools, or to develop new measuring tools. Although the outcomes of this study can be used to verify reliability and appropriateness of concerned concepts to assess stresses caused during the job performance of Radiological Technologists, it may be improper to adopt them to measure all types of social supports and stresses that occur generally under the job environment. It is desired, however, to compare and analyze the findings of the present study with others and to utilize them as basic data for further development of tools that can maintain internal coherence in terms of reliability and appropriateness in spite of changing social environments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.187-192
• /
• 1993

Thermal deformation causes large amount of machine tool errors. In order to compensate for thermal and geometric errors of the machine tool an off-line geometric adaptive control (GAC) scheme was developed. THe GAC method was realized by using a measuring plate made of precision spheres. Error vectors and volumetric errors were measured by the measuring plate. Error compensation models were obtained from error vectors and a kinematic chain of machine tools. Reliability of the GAC system of thermal and geometric errors were confrimed by large amount of experiments.

• Journal of Korean Society for Quality Management
• /
• v.27 no.2
• /
• pp.201-217
• /
• 1999

Industrial Measuring Instrument is a general name of equipments or tools for measuring and weighing. Inaccurate measuring instruments produce inferior goods in spite of excellent experts, good materials and wonderful equipments. Three characteristics are important for measuring instruments: choosing the proper instruments for measuring, using them properly and managing them to keep accuracy and precision. The purpose of this thesis is to develope the management standard for effective control of measuring instruments by analysing the problems and the management conditions of 100 PPM certified companies out of the domestic small and medium manufacturing industry, which steadily carry out quality control.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.5
• /
• pp.461-466
• /
• 2013

In this paper, main mechanism and measurement method of energy consumption for machine tools are investigated by experiment and simulation. To evaluate total energy consumption of the machine tools, standard test workpiece and measuring method and test procedures are suggested. And, improvement of energy consumption evaluation by the motion kinematics theory is used. In addition, to estimate energy consumption of machine tools in design process, mass distribution of the structure and 5 axis motions are investigated and simulated by numerical analysis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.5
• /
• pp.401-407
• /
• 1984

In the previous paper, part I, the principal stresses were investigated on the normal tools and the workpieces whose materials were the same epoxy resin. In this paper, are measured and compared the stresses on the normal tools and restricted tools which have three various rake angles. Each restricted tool above has the same restricted angle. The workpieces used in this experiment are made of high quality lead. The photoelastic measuring device is attached to the saddle of the lathe and carried at the same speed as the cutting tool is feeded. The results obtained are summarized as follows; The shear stresses on the tip of the restricted tools of the rake angle .alpha.=12.deg. and .alpha.=0.deg. are less than those of normal tools. But, for the rake angle .alpha.=-12.deg., the former is greater than the latter. The result of photoelastic method shows that in the range of rapid decreasing of normal stress on the tool edge, the shear is maintaining a certain value.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.204-209
• /
• 1998

The acceleration of the performance of machine tools influences the development of the semi-conductor and optical technology as the development of NC and measurement technology. We can mention that a traction role of the acceleration for the development like that depends on the development of the measurement technics Stylus instrument method, STM, SEM, Laser interferometer method which are used for measuring the quasi-static error of machine tools. Because the measurement has been done to unload condition without considering of mechanical stiffness in the case of machining center as we measure the quasi-static error of machine tools on general studies, people who works on the spot has many problems on the data value. Therefor we will help working more accurately on the spot by measuring, analyzing, displaying the deflection of the table and support shaft when we load on the table and the support shaft of machining center using laser interferometer. Also we try to settle new conception of the measurement method and more accurate grasp of the deflection tendency by verifing the tendency of the error measured through the comparison of the simulated error using ANSYS, a common finite element analysis program, which is able to measure heat deformation, material deformation, and error resulted form this study.