• Journal of agricultural medicine and community health
• /
• v.6 no.1
• /
• pp.13-24
• /
• 1981

This study was conducted with 478 farm households located in Pyongtaek Gun of Gyonggi Do, Chongju City and Chongwon Gun of Chung Buk Do, and Hongchon Gun of Gangwon Do for the period of 10, September through 20, October 1980. It dealt with general features of the farmhouseholds, their practices of handling and using pescides, and relationship between safe use of pesticides and poisoning experiences. The results of the study are summarized as follows: 1. Of the total, 63.2% purchased pesticides mainly through the Agricultural Coops, and 95.4% transported them home separately from other goods. 2 Pesticides were sold contained mainly in glass bottles and paper bags. 3. Mixing of the respodents (87.5%) stored pesticides in sheds, warehouses and boxes. 4. Mixing containers and measuring tools were not used by the majority of the group studied. This indicates that there exist serious problems of safety and accuracy with regard to use of pesticides. 5. As to pesticide protective devices, gloves, respirators, goggles and boots were not used in general. Even in case of using them, their quality was not satisfactory. 6. Among the interviewees, 4.2% did not read pesticide label, 33.9% did not wash immediately when pesticide was spilled on the skin, 48.4% did not care the wind direction during pesticide application, and 17.0% did not wash hands when smoking a cigarette while pesticide is being handled. 7. Of the total, 40.4% were found to harvest vegetables within 10 days from the date of pesticide application, which indicates their unawareness of possible hazards by pesticide residues. 8. Empty pesticide containers or bags were not properly disposed of by majority of the respondents. Furthermore, impacts on the environment by the misuse or abuse of pesticides were not understood by 67.6% 9. Of the interviewees, 48.7% were found to have not received instructions on safe use of pesticides. 10. The rate of pesticidal poisoning experience was about 28.0% if minor symptoms excluded, and it rose to about 44.0% if included. Meanwhile, the rate of pesticidal poisoning tends to increase with the size of farm. 11. The study failed to show a statistically significant relationship between the rate of pesticidal poisoning and use of mixing container and/or measuring tools. However, use of gloves showed a statistical significance on the rate of pesticidal poisoning. 12. Among the poisoned cases, 19.0% were cared for in either hospitals or clinics.

• Journal of Korean Public Health Nursing
• /
• v.15 no.1
• /
• pp.56-72
• /
• 2001

Community mental health management system emphasizing on the rehabilitation and the return to the community has been established and carried out for many years. The study has been demanded to prove that the decreasing rate of the recurrence of the mentally ill resulted to lower their medical costs, to enrich the quality of life, and to reduce the psychological burden of their family. This study tried to prove that the mental health services to the mentally ill which were registered in community mental health center of A city have an influence on the medical cost, the quality of their lives. the family burden. The subject group of this study were 39 home-based mentally ill patients and their 37 family members, totally 76 people registered in mental health center of A city and participated in its program. This research had been measured twice, the first before the intervention and the second after at least a year. The measuring tools in the research were the medical cost measurment tools developed by the researcher, the quality of life index by Yoo ja, Noh(1988) and the family burden by Montgonery(1985). The methods were modified and supplemented in this study. This research made use of SPSS Win 10.0. The results of this study are the same as followings. 1) There were the significant difference in the medical cost before and after the mental health service delivery. 2) The quality of lives of the mentally ill, after the mental health services delivered were significantly higher than before. 3) The family burden were significantly reduced after the delivery of community mental health services. Community mental health services brought out efficient results to the social return and rehabilitation. And these results means that the mentally ill changed highly the quality of life and their burden of family and medical cost were reduced. So the public organization and the private society should help positively the mentally ill and their family through mental health policy and social service agency to live healthy lives and to be valuable member of society.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.28-36
• /
• 2020

As many types of magnetic sensors are widely applied in various industries, the analysis and processing of magnetic sensor data need to be accurate. On the other hand, owing to the complexity of the magnetic field line caused by a moving magnet, the magnetic data generated by magnetic sensors are unpredictably nonlinear. Many industry systems using magnetic sensors have struggled with the nonlinear nature of magnetic sensor data. To reduce the effect of the nonlinearity, they have the target objects fixed firmly. Therefore, to collect accurate and reliable data, considerable efforts have been made to resolve the issues with the expensive tools and systems required. Through this paper, to tackle the issues, the data analysis and methodologies, including intelligent algorithms, are presented for the wrist rehabilitation system using magnetic sensors while being implemented without using expensive tools or systems. On processing magnetic sensor data, this paper adopted an intelligent algorithm, fuzzy logic, and compared the performance of other algorithms for comparison.

• Journal of Korean Library and Information Science Society
• /
• v.42 no.4
• /
• pp.31-50
• /
• 2011

In education, evaluation is an important element because instructor can judge the growth and development of students, it has been to bring about quality improvement in education. Performance assessment has emerged to overcome traditional evaluation such as paper test, multiple choice test. Performance assessment is an approach to measuring a student's status based on the way the student completes a specified task. Information literacy instruction is aimed at cultivating information literacy. Performance assessment suitable for measurement to status of Information literacy. In order to performance assessment, task should have the first. However, instructor is difficult to develop a good performance task to meet the assessment needs. Therefore, this research aims at suggesting the developmental tool of performance task applicable to Information literacy instruction. The proposed tool is a template type, consists of 4 steps, educational goals and learning objectives, knowledge and capabilities, task types, measurement and scoring criteria.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.88-93
• /
• 2017

Due to the requirement of the development of the precision manufacturing industry, the accuracy of machine tools has become a key issue in this field. A critical factor that affects the accuracy of machine tools is the feed system, which is generally driven by a ball screw. Basically, to improve the performance of the feed drive system, which will be thermally extended lengthwise by continuous usage, a thermal error compensation system that is highly dependent on the feedback temperature or positioning data is employed in the machine tool system. Due to the overdependence on measuring technology, the cost of the compensation system and low productivity level are inevitable problems in the machine tool industry. This paper presents a novel feed drive thermal error compensation system method that could compensate for thermal error without positioning or temperature feedback. Regarding this thermal error compensation system, the heat generation of components, principal of compensation, thermal model, mathematic model, and calculation method are discussed. As a result, the test data confirm the correctness of the developed feed drive thermal error compensation system very well.

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.174-182
• /
• 2004

Hygienic standards for pizza specialty restaurant located in Seoul during summer, 2000 were established based on HACCP concept by measuring temperature, time, pH, $A_{w}$ and microbiological assessments of pizza, and evaluation of hygienic conditions of kitchens and workers. Kitchen and worker conditions were average 1.2 and 1.0 (3 point Sly's scale), respectively, Microbial contaminations occurred at $5-60^{\circ}C$, pH above 5.0, and $A_{w}$ (0.93-0.98). Microbial assessments for pizza processing revealed $1.5{\times}10^{2}-3.9{\times}10^{8}\;CFU/g$ of TPC and $0.5{\times}10^{1}-1.6{\times}10^{7}\;CFU/g$ of coliforms, exceeding standards ($TPC\;10^{6}\;CFU/g\;and\;coliform\;10^{3}\;CFU/g$) established by Solberg et al., although significantly decreased after baking. S. aureus was not discovered, but Salmonella was found in onions. Tools and containers such as pizza cutting knife, topping container, serving bowl, pizza plate, working board, and dough kneading board contained $6.2{\times}10^{2}-1.1{\times}10^{9}\;CFU/g$ of TPC, $2.0{\times}10^{1}-6.2{\times}10^{3}\;CFU/g$ of coliforms. Workers' hands contained $3.1{\times}10^{4}\;CFU/g$ of TPC and S. aureus as compared to safety standards of Harrigan and McCance (500 and 10 CFU/g of TPC and coliforms per $100cm^{2}$). CCPs (critical control points) were determined as receiving, topping, and baking according to CCP decision tree analysis. Results suggest purchase of quality materials, careful monitoring of time and temperature, hygienic use of tools and utensils, and sanitary practicer by workers are recommended as control points for safe pizza production.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.285-290
• /
• 2001

There are some of the tools for measuring enterprise and group behavior on construction projects. Of these, performance is vital. But, because of imperfect factors, it came under attack. An enterprise can, however, improve it's problem with performance measurement. For this reason, it is essential tool for achieving objectives of an enterprise. Domestic construction industry must understand that what isn't measured, it not only can't manage it also can't improve. The objective of this study is to investigate the performance measurement tools and items in overseas construction projects(UK, Australia). Based on the data, the study suggests the considerable items, problems and restrictive factors as it is accepted on domestic construction industry.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.3 s.15
• /
• pp.112-118
• /
• 2003

This study aims to management and environmental system is a set of a theory logic management tools and principles designed to create the administrative procedures that a company needs to integrate management and environmental concerns into its daily business practices. Integrate environmental considerations of risk reduction and wise resource management into daily business decision making that includes performance and cost. Seek management and environmental solutions that promote competitiveness environmental aspect recognize need for a commitment to continuous improvement of a it's decision making model. Provide business with tools and methodologies to make better environmental choices and understand the environmental effects of resource flows. A last of understand use of the Decision Making element principal as a guideline for evaluating and ranking approaches. The result of this study are summarized as follows; (1) setting for approach decision management select of the change environment police, (2) making improvements of developing operational controls setting targets, (3) measuring and achieving success of EMS, (4) decision making system on the Environment and Management

• Journal of Korean Biological Nursing Science
• /
• v.7 no.2
• /
• pp.31-48
• /
• 2005

Purpose: Studies focus on cancer control, prevention, or assessment of psychosocial problems and intervention methods. However, few studies exist concerning psychosocial problems, measuring tools for those problems, and interventions for cancer patients in Korea. One of the purposes of this study was to review studies in this area, to examine various psychosocial problems experienced by cancer patients. This is a crucial area to investigate, since psychosocial problems in turn negatively influence the patients' immune function, which speeds the progress of the disease. Another goal was to identify instruments used to measure psychosocial functioning and problems in cancer patients, to analyze their validity and reliability, with the aim to discover the best instruments. A final goal was to explore and compare the effects of psychosocial interventions, to determine the most effective practices. Method: Journal articles published since 1995 were searched from PubMed Data base, Google search engine, and published cancer-related studies, using search keywords "psychosocial function and intervention for the cancer patients"; whole articles of selected references were reviewed and analyzed. Result: Most common psychosocial problems were depression, fatigue, nausea, pain, distress, resulting in a low quality of life. The seven scales found in the literature to assess the psychosocial functioning were Center for Epidemiological Studies-Depression, State-Trait Anxiety Inventory, Symptom Checklist 90-R, Profile of Mood States, Psychosocial Adjustment to Illness Scale, Brief Symptom Inventory, and SF-36 HRQOL(Health Related Quality of Life). Social support interventions for cancer patients were effective in improving quality of life scores. Conclusion: It is necessary to apply support intervention strategies to help cancer patients in Korea. These strategies can help to reduce the effects of psychosocial symptoms, which in turn affect the development and control of cancer. Strategies developed in Western countries may need to be modified for use within Korea. Further studies are warranted to review the support intervention strategies that were being used to for cancer patients

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.362-365
• /
• 2005

Currently Chemical Mechanical Planarization (CMP) has become an essential step in the overall semiconductor wafer fabrication technology. Especially the CMP pad conditioner, one of the diamond tools, is required to have strong diamond retention. Strong cohesion between diamond grits and metal matrix prevents macro scratch on the wafer. If diamond retention is weak, the diamond will be pulled out of metal matrix. The pulled diamond grits are causative of macro scratch on wafer during CMP process. Firstly, some results will be reported of cohesion between diamond grits and metal matrix on the diamond tools prepared by three different manufacturing methods. A measuring instrument with sharp cemented carbide connected with a push-pull gauge was manufactured to measure the cohesion between diamond grits and metal matrix. The retention force of brazed diamond tool was stronger than the others. The retention force was also increased in proportion to the contact area of diamond grits and metal matrix. The brazed diamond tool has a strong chemical combination of the interlayer composed of chrome in metal matrix and carbon which enhance the interfacial cohesion strength between diamond grits and metal matrix. Secondly, we measured real-time data of the coefficient of friction and the pad wear rate by using CMP tester (CETR, CP-4). CMP pad conditioner samples were manufactured by brazed, electro-plated and sintered methods. The coefficient of friction and the pad wear rate were shown differently according to the arranged diamond patterns. Consequently, the coefficient of friction is increased according as the space between diamonds is increased or the concentration of diamonds is decreased. The pad wear rate is increased according as the degree of diamond protrusion is increased.