• Therapeutic Science for Rehabilitation
• /
• v.5 no.2
• /
• pp.57-69
• /
• 2016

Objective: The purpose of this study was to systematically review the articles using accelerometer to measure activity of daily living of patients with stroke. Methods: Depending on selection criteria, 13 studies were searched for PubMed, EMBASE, and Cochrane library database from February 2014 to March 2014. A total of 331 papers were searched, and 13 of these were selected. Results: In studies of 13 selected, acute, subacute, and chronic patients with stroke were enrolled. The kind of accelerometer was uniaxial, biaxial, and triaxial, activity monitor. Measurement activities were mainly arm activity, walking activity, and attachment sites were also various depending on the measurement activities. A measured variable was the total number of activities, the movement speed of the patients, ratio between affected and non-affected, and motion analysis. The result indicated that significant correlation with the other assessment tools in all studies. Conclusions: Accelerometer will be applied with a tool for measuring activity of daily living of patients with stroke, depending on activities characteristics. Further, we need accelerometer studies to apply with a variety of assessment in clinical practice or community settings.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.220-223
• /
• 2008

A camera system for the satellite application performs the mission of observation by measuring radiated light energy from the target on the earth. As a development stage of the system, the signal level analysis by estimating the number of electron collected in a pixel of an applied CCD is a basic tool for the performance analysis like SNR as well as the data path design of focal plane electronic. In this paper, two methods are presented for the calculation of the number of electrons for signal level analysis. One method is a quantitative assessment based on the CCD characteristics and design parameters of optical module of the system itself in which optical module works for concentrating the light energy onto the focal plane where CCD is located to convert light energy into electrical signal. The other method compares the design\ parameters of the system such as quantum efficiency, focal length and the aperture size of the optics in comparison with existing camera system in orbit. By this way, relative count of electrons to the existing camera system is estimated. The number of electrons, as signal level of the camera system, calculated by described methods is used to design input circuits of AD converter for interfacing the image signal coming from the CCD module in the focal plane electronics. This number is also used for the analysis of the signal level of the CCD output which is critical parameter to design data path between CCD and A/D converter. The FPE(Focal Plane Electronics) designer should decide whether the dividing-circuit is necessary or not between them from the analysis. If it is necessary, the optimized dividing factor of the level should be implemented. This paper describes the analysis of the electron count of a camera system for a satellite application and then of the signal level for the interface design between CCD and A/D converter using two methods. One is a quantitative assessment based on the design parameters of the camera system, the other method compares the design parameters in comparison with those of the existing camera system in orbit for relative counting of the electrons and the signal level estimation. Chapter 2 describes the radiometry of the camera system of a satellite application to show equations for electron counting, Chapter 3 describes a camera system briefly to explain the data flow of imagery information from CCD and Chapter 4 explains the two methods for the analysis of the number of electrons and the signal level. Then conclusion is made in chapter 5.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.21-30
• /
• 1998

In this paper, a digital current control system using a FPGA(Field Programmable Gate Array) was implemented, and the system was applied to an induction motor widely used as an industrial driving machine. The FPGA designed by VHDL(VHSIC Hardware Description Language) consists of a PWM(Pulse Width Modulation) generation block, a PWM protection block, a speed measuring block, a watch dog timer block, an interrupt control block, a decoder logic block, a wait control block and digital input and output blocks respectively. Dedicated clock inputs on the FPGA were used for high-speed execution, and an up-down counter and a latch block were designed in parallel, in order that the triangle wave could be operated at 40 MHz clock. When triangle wave is compared with many registers respectively, gate delay occurs from excessive fan-outs. To reduce the delay, two triangle wave registers were implemented in parallel. Amplitude and frequency of the triangle wave, and dead time of PWM could be changed by software. This FPGA was synthesized by pASIC 2SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to digital current control system for 3-phase induction motor. The digital current control system of the 3 phase induction motor was configured using the DSP(TMS320C31-40 MHz), FPGA, A/D converter and Hall CT etc., and experimental results showed the effectiveness of the digital current control system.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.167-174
• /
• 2001

Reflection method using ultrasonic source has been attempted to obtain the information about tunnel lining structures composed of lining, shotcrete, water barrier and voids at the back of lining. In this work, two different types of sources, i.e. single-pulse source and sweep source, can be used. Single-pulse source with short time duration has the frequency content whose amplitudes tend to be concentrated around the dominant frequency, whereas sweep source with long time duration denotes a flat distribution of relatively larger amplitude over a broad frequency band, although the peak to peak amplitude of single-pulse source wavelet is equivalent to that of sweep source one. In traditional seismic application, a single-pulse source(weight drop, dynamite) is typically used. However, to investigate the fine structure, as it is the case in the tunnel lining structure, the sweep wavelet can be also a desirable source waveform primarily due to the higher energy over a broad frequency band. For the investigation purposes of sweep source, a physical modeling is a useful tool, especially to study problems of wave propagation in the fine layered media. The main purpose of this work was using a physical modeling technique to explore the applicability of sweep source to the delineation of inner layer boundaries. To this end, a two-dimensional physical model analogous to the lining structure was built and a special ultrasonic sweep source was devised. The measurements were carried out in the sweep frequency range 10 ∼ 60 KHz, as peformed in the regular reflection survey(e.g. roll-along technique). The measured data were further rearranged with a proper software (cross-correlation). The resulting seismograms(raw data) showed quitely similar features to those from a single-pulse source, in which high frequency content of reflection events could be considerably emphasized, as expected. The data were further processed by using a regular data processing system "FOCUS" and the results(stack section) were well associated with the known model structure. In this context, it is worthy to note that in view of measuring condition the sweep source would be applied to benefit the penetration of high frequency energy into the media and to enhance the resolution of reflection events.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.9
• /
• pp.87-102
• /
• 2005

In the congested urban areas, tunnelling close to existing structures or services often occurs due to the lack of surface space so that tunnelling-induced ground movements may cause a serious damage to the adjacent structures. This study focused on the two dimensional laboratory model pile-soil-tunnelling interaction tests using a close range photogrammetric technique. Testing equipments and procedures were Introduced, particularly features of aluminium rods regarded as the frictional granular material. The experimental result showed that the photo imaging process by the VMS and EngVis programs proved to be a useful tool in measuring the pile tip movements during the tunnelling. Consequently, the normalised pile tip movement data for the influence zones can be generated by the laboratory model tests using the Photogrammetric technique. This study presents influence zones associated with the normalized pile tip settlements due to tunnelling in the cohesionless material. The influence zones were Identified by both a laboratory model test and a numerical analysis. The normalized pile tip movements from the model test were in good agreement with the numerical analysis result. The influence zones proposed in this study could be used to decide the reasonable location of tunnel construction in the planning stage. However, the scale of model pile and model tunnel sizes must be carefully adjusted as real ones for practical application considering the ground conditions at a given site.

• Women's Health Nursing
• /
• v.3 no.2
• /
• pp.208-223
• /
• 1997

This study was made to suggest the nursing strategies for promoting the behaviors about bone mass health behaviors in order to prevent middle aged women's osteoporosis. This study was a descriptive-correlational design that also concerned to the types which improve bone mass promoting behaviors by inspecting patterns of health locus of control method out of recognizable variables of health improving models influencing on these bone mass promoting behaviors. For these purpose, data were collected by self reported questionnaire in middle school, from 158 women living in Seoul. The measuring tools used in this study about bone mass promoting behaviors and multidimensional health locus of control, were developed by author on the basis of literature review and analyzed by SPSS-PC window, into pearson's correlation, ANOVA, multiple regression, cluster analysis. Data was analyzed as follows. 1. 6 Multidimensional health locus of control scale clusters were existed. : a)cluster I (pure internal), b)cluster II(pure chance), c) cluster III(Believer in control), d), cluster IV(Type VI), e)cluster V(yea sayer), f) cluster VI(nay sayer). There were no findings of the powerful others external cluster and double external cluster. 2. The higher the value of internal health locus of control was, the better the bone mass promoting behaviors were(r=.2891, $p=.00^{**}$). The higher the value of chance external health locus of control was, the worse the bone mass promoting behaviors were(r=-.1367, $p=.00^{**}$). 3. On the basis of these relationships, 6 clusters were significantly different in the bone mass promoting behaviors(F=2.27, $p=.05^*$). The value of bone mass promoting behaviors was ranked the order of type VI>believer in control>pure internal>yea sayer>nay sayer>pure chance external highly. 4. Bone mass promoting behaviors were not significantly different as to age. Suggestion. Based on the results from the study, I would like to make some suggestions as follows. 1) To delay the loss of bone mass in middle aged women, the study on the cluster of the multidimensional health locus of control should be conducted repeatedly. 2) The tool of multidimensional health locus of control should be developed through a qualitative method adjusted on Korean' health culture.

• Journal of Korean Academy of Nursing
• /
• v.30 no.2
• /
• pp.437-451
• /
• 2000

The purpose of this study was to estimate the forecast of bed demand for institutional long-term care for the elderly persons in Taegu Metropolitan City. The study subject was the total 1,877 elderly persons over age 65 living in Taegu. Among them 1,441 elderly persons were sampled from community and 436 were from the elderly admitted 5 general hospitals. Data collection was carried out by interview from 25 August to 25 December 1997. The measuring instrument of this study was the modified tool of CARE, MAI, PCTC, and ADL which were examined for validity and reliability. In order to forecast bed demand of Nursing Home, this study revised prediction techniques suggested by Robin. The results were as follows : 1. OLDi of Taegu City were 122,202 by the year 1998 and number of Low-Income Elderly Persons were 3,210. 2. The Level I : Senior Citizen Home $ADEMi=\frac{AQi * ASTAYi}{365 * AOCUi}$. AQi = OLDi * LADLi * NASi * ALONi * LIADLi * AUTILi. Predicted number of bed demand for Home Based. Elderly Persons were 4,210 and Low-Income Elderly Persons were 1,081 and Total Elderly Persons were 5,291 by the year 1998, 6,343 by the year 2000 and 8,351 by the 2005. 3. The Level II : Nursing Home $BDEMi=\frac{(BQ1i+BQ2i) * BSTAYi}{365 * BOCUi}$. BQ1i = OLDi * HADLi * ALONi * HIADLi BQ2i = OLDi * HADLi * FAMi * OBEDi Predicted number of demand for Total Elderly Persons were 668 by the year 1998, 802 by the year 2000 and 1,055 by the 2005. 4. The Level III : Nursing Home $CDEMi=\frac{COLDi * HDISi * CUTILi * CSTAYi}{365 * COCUi}+OQi/10$ Predicted number of demand for Total Elderly Persons were 1,899 by the year 1998, 2,311 by the year 2000 and 3,003 by the 2005. 5. Predicted number of bed demand of long-term care facilities in the year 1998 according to Levels were 4.3% among elderly persons in Taegu by Level I, 0.5% by Level II and 1.5% by Level III. Number of elderly persons in current long-term care facilities were 458 in LevelI I,284 in Level II. 6. Deficit number of bed demand of long-term care facilities were 4,833 in Level I, 384 in Level II, 1,899 in Level III for the elderly persons in Taegu Metropolitan City.

• Imaging Science in Dentistry
• /
• v.37 no.3
• /
• pp.165-170
• /
• 2007

Purpose: To estimate the shape of root and pulp canal using a dental cone beam computed tomography (CBCT) and to evaluate the accuracy of imaging reformation. Materials and Methods: CBCT images were obtained with incisors, premolars, and molars as the destination by using PSR $9000N^{TM}$ Dental CT system (Asahi Roentgen Ind. Co., Ltd, Kyoto, Japan) and i-CAT (Imaging Sciences International, Inc, USA) cone beam CT unit that have different kind of detector and field of view, and compared these with the shape and the size of actual root and root canal. Results: When the measuring value of cone beam computed tomography concerning to each root's bucco-lingual diameter and mesio-distal diameter was compared with the value of the actual root, it reveals an error range $-0.49{\sim}+0.63$ mm at PSR900N and $-0.97{\sim}+1.14$ mm at i-CAT (P>0.05). It was possible to identify and measure PSR$9000N^{TM}$ Dental CT system to the limit $0.48{\pm}0.06mm$ (P>0.05) and i-CAT CBCT to the limit $0.86{\pm}0.09mm$ (P<0.05) on estimating the size and the shape of root canal. Two kinds of CBCT images revealed the useful reproducibility to estimate the shape of root, but there was the difference to estimate the shape of root according to apparatus. The reproducibility of root shape in the image of three-dimensions at PSR 900N is low such as 0.65 mm in a case of minute root canal. Conclusions: CBCT images revealed higher accuracy of the imaging reformation for root and pulp and clinically CBCT is a useful diagnostic tool for the assessment of root and canal. However, there are different qualities of imaging reformation according to CBCT apparatus and limitation of reproducibility for minute root canals.

• Journal of Practical Engineering Education
• /
• v.12 no.1
• /
• pp.163-176
• /
• 2020

Promoting job growth and quality has been central to developing countries to reduce poverty for decades. In this regard, Nepal is not unique in its need to develop effective TVET programme as it is considered showing positive association with workforce development and productivity. While the copious academic literature has highlighted upon staff training programme in general education, it encounters lack of adequate attention in the field of TVET education. The purpose of the study is to identity and prioritise the professional development needs for the teachers of TVET sector in Nepal. A sample(N=317) of Nepalese teachers from seven provinces were asked to answer the scale. The Borich needs assessment model was employed to assess the perceived level of importance and present preferred training modules among 29 teaching subjects. Moreover, a quadrant analysis using 2×2 matrix was used as a diagnostic tool to denote overriding training topics. The result shows that following competence skills constructs were perceived to be in high need of enhancement as well as in existence of discrepancies: 'occupational characteristics of TVET trainer', 'training needs analysis and curriculum development', 'curriculum development based on national competence standard(NCS)', and 'Institution management evaluation'.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.3
• /
• pp.103-110
• /
• 2016

Recently, structural health monitoring system(SHMS) has been appled cable bridges as the effective maintenance tool and the management threshold is considered to assess the status of the bridge in SHMS. The threshold is generally determined by the allowable limit based on design specification because there is no method and standard for threshold calculation. In case of the conventional thresholds, it is difficult to recognize the event, abnormal behavior and gradual damage within the threshold. Therefore, this study reviewed the problem of previous methods and proposed the advanced methodologies based on probabilistic approach for threshold calculation which can be applied to practice work. Gumbel distribution is adopted in order to calculate the threshold for caution and warning states considering the expectations for return periods of 50 and 100 years. The thresholds were individually determined for measurement data and data variation to detect the various abnormal behaviors within allowable range. Finally, it has confirmed that the thresholds by the proposed method is detectable the abnormal behavior of real-time measuring data from SHMS.