• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.75-82
• /
• 2023

Data for measuring the flow rate of streams are used as important basic data for the development and maintenance of water resources, and many experts are conducting research to make more accurate measurements. Especially, in Korea, monsoon rains and heavy rains are concentrated in summer due to the nature of the climate, so floods occur frequently. Therefore, it is necessary to measure the flow rate most accurately during a flood to predict and prevent flooding. Thus, the U.S. Geological Survey (USGS) introduces 1, 2, 3 point method using a flow meter as one way to measure the average flow rate. However, it is difficult to calculate the average flow rate with the existing 1, 2, 3 point method alone.This paper proposes a new 1, 2, 3 point method formula, which is more accurate, utilizing one probabilistic entropy concept. This is considered to be a highly empirical study that can supplement the limitations of existing measurement methods. Data and Flume data were used in the number of holesman to demonstrate the utility of the proposed formula. As a result of the analysis, in the case of Flume Data, the existing USGS 1 point method compared to the measured value was 7.6% on average, 8.6% on the 2 point method, and 8.1% on the 3 point method. In the case of Coleman Data, the 1 point method showed an average error rate of 5%, the 2 point method 5.6% and the 3 point method 5.3%. On the other hand, the proposed formula using the concept of entropy reduced the error rate by about 60% compared to the existing method, with the Flume Data averaging 4.7% for the 1 point method, 5.7% for the 2 point method, and 5.2% for the 3 point method. In addition, Coleman Data showed an average error of 2.5% in the 1 point method, 3.1% in the 2 point method, and 2.8% in the 3 point method, reducing the error rate by about 50% compared to the existing method.This study can calculate the average flow rate more accurately than the existing 1, 2, 3 point method, which can be useful in many ways, including future river disaster management, design and administration.

• Journal of the Korean Chemical Society
• /
• v.67 no.2
• /
• pp.81-88
• /
• 2023

The contribution of hydrophobic residues to the protein folding reaction was studied by using HubWA variant proteins with I and L to V mutation. Folding kinetics of all V variant proteins was observed to be satisfied by a three-state on-pathway mechanism, U ⇌ I ⇌ N, where U, I, and N represent unfolded, intermediate, and native state, respectively. Three-state folding reaction was quantitatively analyzed and the free energy of folding of each elementary reactions and overall folding reaction, ΔG^o_UI, ΔG^o_IN, and ΔG^o_UN, were obtained. From the ratio of free energy difference between the variant protein and HubWA, ΔΔG^o_UI/ΔΔG^o_UN (ΔΔG^o_UI = ΔG^o_UI (variant protein) - ΔG^o_UI (HubWA) and ΔΔG^o_UN = ΔG^o_UN (variant protein) - ΔG^o_UN(HubWA)), the contribution of hydrophobic residues to HubWA folding was analyzed. The residues which are located in the hydrophobic core between α-helix and β-sheet, I3, I13, L15, I30, L43, I61 and L67, showed ΔΔG^o_UI/ΔΔG^o_UN value of ~0.5 when each of these residues was mutated to V, indicating that these residues form relatively solid hydrophobic core in the intermediate state. Residues located at the end of secondary structures and loop, I23, L69 and I36 showed ΔΔG^o_UI/ΔΔG^o_UN value below 0.4 when each of these residues was mutated to V, indicating that the region containing these residues are loosely formed in the intermediate state. V17A, L50V and L56V showed fairly high ΔΔG^o_UI/ΔΔG^o_UN value of ~0.8. Since L50 and L56 are located in the region containing long loop (residue 46 to 62), it is suggested that the high ΔΔG^o_UI/ΔΔG^o_UN value of these residues prevents the formation of aggregate at the early stage of folding reaction.

• Journal of Food Hygiene and Safety
• /
• v.38 no.2
• /
• pp.55-62
• /
• 2023

This study aimed to investigate the effect of a coating agent on pork storage. Pork was coated with a coating agent containing sodium carboxymethyl cellulose (CMC) and mandarin peel powder (M). The treatments were divided into control, a 0.1% CMC treatment, and a 0.1% CMC +5% M treatment, and pH, color, 2-thiobarbituric acid reactive substances (TBARS), volatile basic nitrogen (VBN), and the number of viable cell counts were measured. In the case of redness (a), it was found that the reduction over the storage period was less in the 0.1% CMC + 5% M treatment than in the control and the 1% CMC treatment. When stored at 4℃ and 25℃, TBARS of pork tended to increase during the storage period, followed by control, 0.1% CMC treatment, and 0.1% CMC + 5% M treatment, indicating that lipid oxidation was most suppressed in pork coated with mandarin peel powder. As a result of measuring the VBN of pork stored at 4℃ and 25℃, the 0.1% CMC + 5% M treatment showed lower values than the control and 0.1% CMC treatment. When the film-coated pork was stored at 4℃, the number of viable cell counts in the 0.1% CMC +5% M treatment area was 7.13±0.96 log CFU/g on the 12th day of storage, delaying the growth of viable cell counts for approximately 3 d more than other treatments. Therefore, coating pork with a film containing CMC and mandarin peel powder has been confirmed to delay the increase in the number of viable cell counts while reducing the quality change during pork storage, which is an effective alternative to improving the storage of fresh food as an edible film.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.1
• /
• pp.65-74
• /
• 2023

This study compared the surface roughness and microbial adhesion characteristics of Omnichroma, a novel composite resin developed using "smart chromatic technology", with those of two other conventional composite resins with different filler compositions. A total of 144 specimens were fabricated using 3 types of composite resins: Omnichroma (nano-spherical), Filtek Z350XT (nanofill), and Tetric N-Ceram (nanohybrid) and, divided into 3 groups of 48. Finishing was performed using tungsten carbide burs. Specimens were then divided into 3 subgroups using different polishing methods: Control, SofLex, and PoGo. Surface roughness was analyzed quantitatively and qualitatively using an atomic force microscope and a scanning electron microscope. Microbial adhesion was assessed by culturing Streptococcus mutans on the specimens for 24 hours and then measuring colony-forming units attached to the upper surface. The surface roughness (Ra) of Omnichroma was 0.123 ㎛ after finishing, and it exhibited a smooth surface compared to the other resins. However, after polishing, there were no significant differences in the surface roughness between the three composite groups, regardless of the polishing methods. The surfaces of the Control subgroups were significantly rougher than those of the SofLex subgroups in all 3 composite groups. However, except for Tetric N-Ceram, there were no significant differences between the Control and PoGo subgroups in the other composite groups. Microbial adhesion assessment showed no significant differences between any of the 3 composite resin subgroups; however, Omnichroma exhibited higher microbial adhesion than the other two composites. No significant correlation was observed between surface roughness and microbial adhesion.

• Journal of the Daesoon Academy of Sciences
• /
• v.45
• /
• pp.69-102
• /
• 2023

There has been a growing demand for spiritual education in public education in recent years. In fact, the concept of spirituality was included in the national religious curriculum in 2022. However, compulsory spiritual education based on the national curriculum is different from individual or private organization-based spiritual education which can be characterized as voluntary. This article aims to discuss the potential problems that may arise when making spiritual education compulsory in public education. This discussion includes the expansion of spiritual discourse and the scope of spirituality, the contents and examples of spiritual education, and the implications of compulsory spiritual education. My perspective on this topic is that the religious curriculum, being a national curriculum, should be applicable to all schools and learners. The channels for expanding spiritual discourse include studies for measuring each individual's spirituality or religiosity and spiritual tourism. Both exclusive and inclusive spirituality coexist within spiritual discourse. Furthermore, spiritual educators criticize knowledge-based education for its tendency towards romanticization, while overlooking reflective education in national religious curriculum. Additionally, the normative nature inherent in the concept of spirituality is often overlooked, despite the potential recurrence of problems seen in faith-based education. This article suggested that the minimum principle for the nation's religious curriculum should be that "religious or normative knowledge is not to be injected or delivered but rather reflected upon." This principle aims to provide an opportunity for learners to reflect on their religious experiences or lives subjectively. When this principle is applied, spirituality becomes the object of reflection and selection for learners. Above all, learners with reflective thinking skills will be able to live independently, even if their experiences and lives change. We hope that this article will serve as an opportunity to continually reflect on the form of religious education found in public education.

• Journal of Science Education
• /
• v.47 no.2
• /
• pp.180-191
• /
• 2023

The purpose of this study was to investigate the preferred SSI topics of students and teachers in elementary, middle, and high schools. It analyzed the similarity of students' and teachers' preferred SSI topics by school level using the cosine similarity measure. A total of 566 students and 327 teachers from elementary, middle, and high schools participated in the study. Sixty topics were identified and listed in the areas of environment, science and technology, health and medicine, and other social issues based on the literature and SSI programs. Students and teachers were asked to select five of their favorite topics. The data was collected online using SurveyMonkey. The collected data was divided into six groups of students and teachers, and the frequency of topic selection was analyzed within each group. The topic preference similarity was analyzed by calculating vector values based on the frequency of the selected topics and measuring the cosine similarity between students, teachers, and teachers and students by school level. The results are as follows: First, the cosine similarity of SSI Preferred Topics between students' school-level cohorts was higher between middle and high school students (0.982) than between elementary and middle school students (0.651) or between elementary and high school students (0.662). Second, the cosine similarity of SSI Preferred Topics between teachers' school-level cohorts was similar for all comparison groups between elementary, middle, and high school. Third, the SSI topic preference similarity between students and teachers by school level had a higher cosine similarity between the elementary student and teacher cohorts (0.974) than the other school level comparisons, middle school (0.621) or high school (0.645). Access to topics of interest to students in SSI education is strongly associated with motivation and persistence in learning, as well as an enjoyable learning experience and positive attitudes toward learning. Therefore, when designing SSI lessons, it is important to examine topics from the perspective of student interest, especially if the teacher has selected SSI topics that are different from students' preferences. Careful instructional design will be needed to overcome the gap.

• Exercise Science
• /
• v.21 no.2
• /
• pp.183-190
• /
• 2012

This study is to evaluate the availability of cardiorespiratory fitness measurement by 20 m shuttle run test based upon energy contribution rates of elite athletes in different sports type. Sixty-seven elite athletes attending K national university participated in this study. They were divided by three groups based upon sports type, composed of Anaerobic Group (sprint, jumps, weightlifting, throw; n=35), Aerobic Group (medium-long distance; n=9), and Combat Sport Group (judo; n=23). 20 m shuttle run test was conducted by Leger et al.(1982) method and calculating acceleration using measured shuttle run repetitions was conducted by Brewer et al.(1988) method. To test the usefulness of VO₂max, graded exercise treadmill test was conducted and standing long jump and 50 m run were measured as power fitness factors. Z-jump was used for measuring power, agility, and muscular endurance. Standing long jump and 50 m run of Anaerobic Group (AnG) was significantly higher than that of Aerobic Group (AeG) and Combat Sport Group (CG) (p<0.05). However, Z-jump of CG was significantly higher than that of AnG and AeG(p<.05). There was a higher correlation of 20 m shuttle run test and VO₂max in AnG(r= 0.577, p<.0001) and CG(r= 0.760, p<.0001). Otherwise, there was a low correlation of 20 m shuttle run test and VO₂max in AeG. There was no significant group difference to test the availability of 20 m shuttle run test and there was a reduced error when converting 20 m shuttle run results into VO₂max. This study examined the usefulness of 20 m shuttle run test by converting 20 m shuttle run repetition results into VO₂max calculation, which showed reduced error. Therefore, this study confirmed that it would be needed to convert 20 m shuttle run results into VO₂max for universal and practical use in the field without dividing sports type.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.247-258
• /
• 2023

This study aims to investigate the enhancement of water resistance and improvement in adhesion to the skin by combining dextrin palmitate and isopropyl titanium triisostearate coating materials with titanium dioxide. Due to the recent increase in consumers who enjoy outdoor activities, the demand for sunscreen with excellent water resistance is increasing. Prior research was conducted with O/W, Pickering, and W/O/W multiple formulations, but there was a limit to water resistance. The purpose of this study is to develop a complex inorganic powder that can improve water resistance and increase adhesion to the skin to solve this problem. First, we combined dextrin palmitate and isopropyl titanium triisostearate coating materials to form a composite with titanium dioxide. The coating of the inorganic powder was confirmed using FE-SEM and FT-IR analysis. The composite exhibited significantly higher in vitro water resistance compared to other formulations. The hydrophobicity of the coated inorganic powder was compared by measuring the contact angles. When the coated inorganic powder was applied to the W/O sunscreen formulation and the non-coated inorganic powder was applied to the W/O sunscreen formulation as a control, the SPF of the sunscreen containing the coated inorganic powder was higher. These results were the same when observed with a UV camera. Finally the adhesion of the coated inorganic powder to the skin was assessed by applying it to a foundation product. In vivo study, it was observed that the product formulated with the coated powder exhibited less smudging compared to the foundation product formulated with the non-coated powder. The developed inorganic powder in this study demonstrated excellent adhesion to the skin, providing a superior sensory experience, as well as enhanced hydrophobicity and remarkable water resistance effects. In the future, the result of this study is expected to help develop various sunscreen products to improve water resistance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.28-41
• /
• 2023

The objective of the study was to develop an Urban Windway Forest Creation Planning Technique for the Improvement of the Urban Environment using the case of Daejeon Metropolitan City. Through a spatial analysis of fine dust and heat waves, a basin zone, in which the concentration was relatively serious, was derived, and an area with the potential of cold air flow was selected as the target area for the windway forest development by analyzing the climate and winds in the relevant zone. Extreme fine dust areas included the areas of the Daejeon Industrial Complex Regeneration Business District in Daedeok-gu and Daedeok Techno Valley in Yuseong-gu. Heat wave areas included the areas of Daedeok industrial Complex in Moksang-dong, the Daejeon Industrial Complex Regeneration Business District in Daehwa-dong, and the high-density residential area in Ojeong-dong. As a result of measuring the wind speeds in Daejeon with an Automatic Weather System, the average wind speeds during the day and night were 0.1 to 1.7 m/s,, respectively. So, a plan of for a windway forest that smoothly induces the movement of cold air formed in outer forests at night is required. The fine dust/heat wave intensive management zones of Daejeon Metropolitan City were Daejeoncheon, Yudeungcheon, Gapcheon-Yudeungcheon, and Gapcheon. The windway forest formation plan case involved the old city center of Daejeon Metropolitan City among the four zones, the Gapcheon-Yudeungcheon area, in which the windway formation effect was presumed to be high. The Gapcheon-Yudeungcheon area is a downtown area that benefits from the cold and fresh air generated on Mt. Gyejok and Mt. Wuseong, which are outer forests. Accordingly, the windway forest was planned to spread the cold air to the city center by connecting the cold air generated in the Seosa-myeon forest of Mt. Gyejok and the Namsa-myeon forest of Mt. Wuseong through Gapcheon, Yudeungcheon, and street forests. After selecting the target area for the wind ventilation forest, a climate map and wind formation function evaluation map were prepared for the area, the status of variation wind profiles (night), the status of fine dust generation, and the surface temperature distribution status were grasped in detail. The wind ventilation forest planning concept and detailed target sites by type were identified through this. In addition, a detailed action plan was established according to the direction of creation and setting of the direction of creation for each type of wind ventilation forest.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.122-126
• /
• 2023

In this paper, a control system for a complex microbial incubator was proposed. The proposed control system consists of a control unit, a communication unit, a power supply unit, and a control system of the complex microbial incubator. The controller of the complex microbial incubator is designed and manufactured to convert analog signals and digital signals, and control signals of sensors such as displays using LCD panels, water level sensors, temperature sensors, and pH concentration sensors. The water level sensor used is designed and manufactured to enable accurate water level measurement by using the IR laser method with excellent linearity in order to solve the problem that existing water level sensors are difficult to measure due to foreign substances such as bubbles. The temperature sensor is designed and used so that it has high accuracy and no cumulative resistance error by measuring using the thermal resistance principle. The communication unit consists of two LAN ports and one RS-232 port, and is designed and manufactured to transmit signals such as LCD panel, PCT panel, and load cell controller used in the complex microbial incubator to the control unit. The power supply unit is designed and manufactured to supply power by configuring it with three voltage supply terminals such as 24V, 12V and 5V so that the control unit and communication unit can operate smoothly. The control system of the complex microbial incubator uses PLC to control sensor values such as pH concentration sensor, temperature sensor, and water level sensor, and the operation of circulation pump, circulation valve, rotary pump, and inverter load cell used for cultivation. In order to evaluate the performance of the control system of the proposed complex microbial incubator, the result of the experiment conducted by the accredited certification body showed that the range of water level measurement sensitivity was -0.41mm~1.59mm, and the range of change in water temperature was ±0.41℃, which is currently commercially available. It was confirmed that the product operates with better performance than the performance of the products. Therefore, the effectiveness of the control system of the complex microbial incubator proposed in this paper was demonstrated.