• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.831-836
• /
• 2006

In the process of accurate manufacture and measurement, it is necessarily required to isolate external or internal vibration due to external disturbance and internal actuators. The higher vibration isolation system gets damping around resonance, the better it is generally. This paper analyzes the performance of an existing passive air-spring for vibration isolation table by using experiment and simulation. Optimal design for a passive air spring can be obtained by tuning the size of the orifice. Also design for an active isolation system is carried out by applying PID controller and considering non-linearity of pneumatic characteristics with help of look-up table. We have developed the active vibration isolation table with the better isolation performance.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.208-213
• /
• 2012

In this paper, the radial error of a rotary table at five-axis machine tool is evaluated by utilizing ISO 230-2 and estimation method using double ball-bar. The geometric error of a rotary table is defined as position dependent geometric errors or position independent geometric errors according to their physical character. Then estimation method of geometric errors using double ball-bar is simply summarized including measurement path, parametric modeling and least squares approach. To estimate representative radial error, offset error, set-up error which affect to the double ball-bar data, mean value of measured data including CCW/CW-direction are used at estimation process. Radial errors are separated from measured data and used for evaluation with ISO 230-2. Finally, suggested evaluation method is applied to a rotary table at five-axis machine tool and its result is analyzed to improve the accuracy of the rotary table.

• 한국정밀공학회지
• /
• 제23권8호
• /
• pp.72-79
• /
• 2006

We measured grating pitch standards using optical diffractometry and analyzed measurement uncertainty. Grating pitch standards have been used widely as a magnification standard for a scanning electron microscope (SEM) and a scanning probe microscope (SPM). Thus, to establish the meter-traceability in nano-metrology using SPM and SEM, it is important to certify grating pitch standards accurately. The optical diffractometer consists of two laser sources, argon ion laser (488 nm) and He-Cd laser (325 nm), optics to make an incident beam, a precision rotary table and a quadrant photo-diode to detect the position of diffraction beam. The precision rotary table incorporates a calibrated angle encoder, enabling the precise and accurate measurement of diffraction angle. Applying the measured diffraction angle to the grating equation, the mean pitch of grating specimen can be obtained very accurately. The pitch and orthogonality of two-dimensional grating pitch standards were measured, and the measurement uncertainty was analyzed according to the Guide to the Expression of Uncertainty in Measurement. The expanded uncertainties (k = 2) in pitch measurement were less than 0.015 nm and 0.03 nm for the specimen with the nominal pitch of 300 nm and 1000 nm. In the case of orthogonality measurement, the expanded uncertainties were less than $0.006^{\circ}$. In the pitch measurement, the main uncertainty source was the variation of measured pitch values according to the diffraction order. The measurement results show that the optical diffractometry can be used as an effective calibration tool for grating pitch standards.

• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.862-874
• /
• 1989

본 연구에서는 반경법 진원도 측정기의 회전정도와 편심에 의한 영향을 제거 하여 시험편의 형상오차와 측정기 자체의 오차특성을 분리함으로써 진원도 측정의 정도를 향상시킬 수 있는 방법에 대하여 검토하였다. 진원도의 표시법으로는 최근 최소영역법에 의해 규정되는 경우가 많으나 이는 일반적으로 많은 연산시간을 요구 하므로 비경제적인 면이 있다.

• 자동차안전학회지
• /
• 제10권1호
• /
• pp.45-51
• /
• 2018

There are some ambiguities of the information on the fuel economy provided to the consumers because the standard and the detailed regulations for the fuel economy of the two-wheeled vehicle have not been established in Korea. Since Korea has been a signatory of World Forum for Harmonization of Vehicle Regulations since 1998, it is possible to remove the ambiguities by adopting the WMTC (Worldwide-harmonized Motorcycle Test Cycle) measurement method for the fuel economy of the two-wheel vehicle. As a preliminary study on the WMTC mode fuel economy, road loads measured by coast down method and table method were compared for the two types of two-wheeled motorcycles on sales in domestic market. In the same model, it was confirmed that the deviation of WMTC mode fuel efficiency was below -5% between products. On the other hand, the difference of WMTC fuel economy exceeded 5% between the coast down method and table method.

• 대한물리의학회지
• /
• 제8권2호
• /
• pp.209-217
• /
• 2013

PURPOSE: The purpose of this study was to investigate the clinical availability of the pendulum test (through reliability and validity) using a NK table attached electrogoniometer for spasticity measurement in patients with brain lesions. METHODS: Thirty-one stroke and traumatic brain injury subjects participated in the study. Intraclass correlation coefficient (ICC) was used to verify the test-retest reliability of spasticity measures of the pendulum test. Pearson's product correlation coefficient was used to examine the validity of the pendulum test through the amplitude of the deep tendon reflex (DTR) test known for objective and quantitative measure of spasticity. RESULTS: In these results, the test-retest reliability was showed significantly high correlation between pendulum tests (ICCs=.95~.97, p<.01). There were significant negative correlations between the amplitude of the DTR test and all measures of spasticity of the pendulum test(r=-.77~-.85, p<.01). CONCLUSION: Thus, it is possible to use the pendulum test using a NK table as an objective measure of spasticity, rather than other expensive equipment, which is more complicated to use. Further studies are needed to explore the therapeutic effects of spasticity using a newly designed pendulum test equipment in this study.

• 농업과학연구
• /
• 제7권2호
• /
• pp.109-118
• /
• 1980

Slump시험(試驗)보다는 조작(操作)이 간편(簡便)한 유통(流動) Table을 사용(使用)하여 화강암질풍화토(花崗岩質風化土)의 유동한계(流動限界)를 측정(測定)하는 방법(方法)을 시험(試驗)하여 다음과 같은 결론(結論)을 얻었다. 1) 화강암질풍화토(花崗岩質風化土)의 유동한계(流動限界)는 입도분포(粒度分布), 퐁화도(風化度) 및 유색광물함량(有色鑛物含量)에 영향(影響)되므로 유동(流動) Table에 의한 유동한계시험법(流動限界試驗法)을 제정(制定)할 때는 최대입경(最大粒徑)이 규정(規定)되어야 할 것으로 생각된다. 2) 유동(流動) Table의 낙하회수(落下回數)를 10회(回)로 하여 유동고(流動高)와 유동폭(流動幅)이 1cm일 때의 함수비(含水比)의 평균치(平均値)를 유동한계(流動限界)로 택(擇)하면 Slump시험(試驗)에서 구(求)한 유동한계(流動限界)보다 약간 작은 값으로 되며 대략(大略) 10%오차한계선내(誤差限界線內)에 속(屬)했다. 3) 유동폭(流動幅)과 함수비(含水比) 및 유동고(流動高)와 함수비(含水比)의 관계곡선(關係曲線)은 유사(類似)한 변화(變化)를 나타내고 반대수용선(半對數用線)에 도시(圖示)하면 액성한계시험(液性限界試驗)에서와 같이 직선관계(直線關係)를 나타냈다. 4) Slump시험(試驗)에 비(比)하여 조작(操作)이 간편(簡便)하고 개인적(個人的)인 오차(誤差)가 작으며 유동폭(流動福)과 유동고(流動高)를 동시측정(同時測定)하여 시험오차(試驗誤差)가 작은 것으로 공학적(工學的) 성질(性質)을 판단(判斷)하는 자료(資料)로 사용(使用)될 수 있는 것으로 생각된다.

• International Journal of Quality Innovation
• /
• 제5권1호
• /
• pp.68-84
• /
• 2004

The measured values of a same object should remain constant regardless of the object's position in the image. In other words, its measured values should not vary as its position in the image changes. However, lens' image distortion, heterogeneous light source, varied angle between the measuring apparatus and the object, and different surroundings where the testing is set up will all cause variation in the measurement of the object when the object's position in the image changes. This research attempts to compensate the machine vision image distortion caused by the object's position in the image by developing the compensation table. The compensation is accomplished by facilitating users to obtain the correcting object and serves the objective of improving the precision of measurement.

• Applied Science and Convergence Technology
• /
• 제23권3호
• /
• pp.103-112
• /
• 2014

The Korea Research Institute of Standards and Science (KRISS) has three major vacuum systems: an ultrasonic interferometer manometer (UIM; Section II, Figs. 1 and 2) for a low vacuum, a static expansion system (SES; Section III, Figs. 3 and 4) for a medium vacuum, and an orifice-type dynamic expansion system (DES, Section IV, Figs. 5 and 6) for high and ultra-high vacuum systems. For each system, explicit measurement model equations with multiple variables are given. According to ISO standards, all of these system variable errors were used to calculate the expanded uncertainty (U). For each system, the expanded uncertainties (k = 1, confidence level = 95%) and relative expanded uncertainty (expanded uncertainty/generated pressure) levels are summarized in Table 4. Within the uncertainty limits, our bilateral and key comparisons [CCM.P-K4 (10 Pa to 1 kPa)] are extensive and in good agreement with those of other nations (Fig. 8 and Table 5).

• 한국지진공학회논문집
• /
• 제14권5호
• /
• pp.23-31
• /
• 2010

본 연구에서는 지진시 앵커기초의 파괴한계성능을 평가하기 위하여 진동대 실험을 수행하였다. 앵커기초에 발생 가능한 열화현상인 균열의 영향을 평가하기 위하여 균열이 없는 시편, 관통균열 시편 그리고 파괴예상면 내에 측면균열이 있는 시편을 제작하여 각각의 파괴한계성능을 평가하였다. 우선적으로 임팩트 해머에 의한 가진 실험을 통하여 동특성분석실험을 수행하여 실험모형의 동특성을 분석하였으며, 앵커기초의 파괴 시까지 진동대 실험을 수행하여 극한거동을 평가하였다. 최종적으로 앵커기초의 설계기준과 비교하여 거동특성을 분석하였다.