• Health Policy and Management
• /
• v.13 no.2
• /
• pp.44-66
• /
• 2003

I. Background and Purpose Health Indicator system and measurement of health status are an important fields in national health fields. This study reviewed the overall concepts of health and health indicators, health indicator system. The purposes of this study are to build the conceptual health framework, and suggest a health indicator system, in order to correspond to the situation of national health and the demand of International organizations. II. Scope and Contents The scope of this study ; - Review of tile conceptual health framework, health indicators, and health Indicator system - Selection and development of tile new individual health indicators - Suggestion of tile revised health indicator system III. Results of Study This study intented to build the conceptual and framework of national health and provide the measurement tools of health status. This study developed the health indicator system through the conceptual and hierarchial approach to national health. The health indicator system contains 6 concern: areas and each sub-areas. The major concern areas are health state and behavior, deathㆍdiseaseㆍdisability, health care utilization, health resources, health expenditure and finance, other affecting factors on health. This health indicator system is corresponding to the situation of health status patterns and the demand of international organizations. And this health indicator system is considering the present health data production system and the availability of health data.

• 대한방사선치료학회:학술대회논문집
• /
• 2005.06a
• /
• pp.19-22
• /
• 2005

Introduction: Daily Q.A is the important step which must be preceded in a radiation treatment. Specially, radiation output measurement and laser alignment, SSD indicator related to a patient set-up recurrence must be confirmed for a reasonable radiation treatment. Daily Q.A proceeds correctness and a prompt way, and needs an objective measurement basis. Manufacture of the device which can facilitate confirmation of output measurement and appliances check at one time was requested. Methods and Materials: Produced the phantom formal daily check device which can confirm a lot of appliances check (output measurement and laser alignment, field size, SSD indicator) with one time of set up at a time, and measurement observed a linear accelerator (4 machine) for four months and evaluated efficiency. Result: We were able to confirm an laser alignment, field size, SSD indicator check at the same time, and out put measurement was possible with the same set up, so daily Q.A time was reduced, and were able to confirm an objective basis about each item measurement. As a result of having measured for four months, output measurement within ${\pm}\;2\%$, and measured laser alignment, field size, SSD indicator in range within ${\pm}\;1mm$. Conclusion: We can enforce output measurement and appliances check conveniently and time was reduced and was able to raise efficiency of business. We were able to bring n cost reduction by substitution expensive commercialized equipment. Further It is necessary to makes a product as strong and slight materials, and improve convenience of use.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1324-1327
• /
• 2009

Social infrastructure is the basis of public welfare and should be recognized and managed as important assets. Bridge is one of the most important infrastructures to be managed systematically because the impact of the failure is critical. It is essential to monitor the performance of bridges in order to manage them as an asset. But current analytical methods such as predictive modeling and structural analysis are very complicated and difficult to use in practice. To apply these methods, structural and material condition data collection should be performed in each element of bridge. But it is difficult to collect these detailed data in large numbers and various kinds of bridges. Therefore, it is necessary to collect data of major measurement items and predict the life of bridges roughly with advanced information technologies. When certain measurement items reach predefined limits in the monitoring bridges, precise performance measurement will be done by detailed site measurement. This paper describes the selection of major measurement items that can represent the tendency of bridge life and introduces automated bridge data collection test-bed using wireless sensor network technology. The following will be major parts of this paper: 1) Examining the features of conventional bridge management system and data collection method 2) Mileage concept as a bridge life indicator and measuring method of the indicator 3) Test-bed of automated and real-time based bridge life indicator monitoring system using wireless sensor network

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.3
• /
• pp.398-407
• /
• 1999

In the present image processing technique, the concept of the gradient indicator(GI) has been introduced to find out the depth-of-field in sizing large particles ranging from $30{\mu}m$ to $30{\mu}m$ where using of the concept of the normalized contrast value(VC) is not appropriate. The gradient indicator is defined as the ratio of the local value to the maximum possible value of the gray-level gradient in an image frame. The gradient indicator decreases with the increases of the particle size and the distance from the exact focal plane. A particle is considered to be in focus when the value of the gradient indicator at its image boundary stays above a critical value. This critical gradient indicator($GI_{critical}$) is defined as the maximum gradient indicator($GI_{max}$) subtracted by a constant ${\Delta}GI$ which is to account for the particle-size effect. In the present ca.so, the value of ${\Delta}GI$ was set to 0.28 to keep the standard deviation of the measured particles mostly within 0.1. It was also confirmed that, to find the depth-of-field for small particles(${\leq}30{\mu}m$) with the same measurement accuracy, tho concept of the critical normalized contrast($VC_{critical}$) is applicable with 85% of the maximum normalized contrast value($VC_{max}$). Finally, the depth-of-field was checked for the size range between $10{\mu}m$ and $300{\mu}m$ when the both in-focus criteria ($GI_{critical}$ and $VC_{critical}$) were adopted. The change of the depth-of-field with the particle size shows good linearity in both the VC-applicable and the GI-applicable ranges with a reasonable accuracy.

• 보존과학연구
• /
• s.31
• /
• pp.59-68
• /
• 2010

Cultural heritages are damaged by surrounding several environmental factors. Main factors are temperature, humidity, light, atmosphere and indoor pollutant, organism, etc. Therefore, to prevent damage of cultural heritage from such environmental factor, conservation environment monitoring becomes more important. Indicator is one of the simple method for environment monitoring. It can be used without expensive and complex equipments. However, it should be performed scientific examination for application to cultural heritage. In this study, some Temperature Indicators were chosen and reliability assessment was carried out for application to cultural heritage. Brightness($L^*$) is selected for reliability assessment factor. As a result of lab test, Temperature Indicators were not influenced greatly in humidity change. When they were exposed to setting temperature, the color was changed in setting temperature area and ${\pm}2^{\circ}C$ part of setting temperature. Especially brightness value was high in setting temperature area. Also, Temperature Indicators were stabilized after about 16 minutes when were exposed to temperature difference of $10^{\circ}C$ and when temperature difference with exposure environment is smaller, stabilization time shortened. Therefore, it is a possible to confirm that selected Temperature Indicator is reliable product through measurement of color difference value and naked eye observation.

• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.128-132
• /
• 2020

Total organic carbon (TOC) analysis equipment, which was previously used to prevent eutrophication in advance, is heavy, bulky, and expensive; therefore, so it is difficult to be carried and has been used as an experimental unit. In this study, a through-carbon analysis chip that integrates pretreatment through photocatalytic oxidation and carbon dioxide measurement using a pH indicator was investigated. Both the total carbon - inorganic carbon method and the nonpurgeable organic carbon (NPOC) measurement method require an acidification part for injecting an acid solution for inorganic carbon measurement and removal, an oxidation part for total carbon or NPOC oxidation and a measurement part for Carbon dioxide (CO₂) measurement. Among them, the measurement of oxidation and CO₂ requires physical technology. The proposed TOC analysis chip decomposed into CO₂ as a result of the oxidizing of organic carbon using a photocatalyst, and the pH indicator that was changed by the generated CO₂ was optically measured. Although the area of the sample of the oxidation part and the pH indicator of the measurement part were distinguished in an enclosed space, CO₂ was quantified by producing an oxidation part and a measurement part that shared the same air in one chip. The proposed TOC analysis chip is less expensive and smaller, cost and size are disadvantages of existing organic carbon analysis equipment, because it does not require a separate carrier gas to transport the CO₂ gas in the oxidation part to the measurement part.

• Journal of the Korean Society for information Management
• /
• v.36 no.4
• /
• pp.53-81
• /
• 2019

The 3rd Library Comprehensive Development Plan (2019-2023) of the Committee on Library and Information Policy under IFLA-UN 2030 Agenda emphasize the role of libraries in practicing social inclusion. At home and abroad, this is shedding new light on libraries as the public service institutions aimed at resolving information inequality. This study thus developed the information inequality measurement indicator optimized for libraries. For this purpose, FGI and Delphi technique were implemented as the verification stage of the expert group. As a result, the final indicators were derived in three evaluation areas, twelve evaluation items, and 30 evaluation indicators. Specifically, first, 3 evaluation items and 8 evaluation indicators were derived in the access evaluation area; second, 5 evaluation items and 12 evaluation indicators were derived in the competency evaluation area; and third, 4 evaluation items and 10 evaluation indicators were derived in the utilization evaluation area. This study is considered to be of great significance in that the information inequality measurement indicators optimized for libraries were developed, the first of its kind.

• Korean Journal of Health Education and Promotion
• /
• v.20 no.1
• /
• pp.19-39
• /
• 2003

Purpose: Although there is a lot of secondary data available for comparing community health status and planning health policies in terms of large area such as metropolitan cities or provinces, there is restricted data for establishing community health policies of the small areas such as towns, Gun(i.e., districts), and Gu. Specifically, the problems of producing a valuable index for health promotion in small areas are three fold: First, there is not an appropriate index model for measuring a small community health status. Second, a large part of secondary data in the small areas has been produced in an irregular time interval. In addition, all valuable data can not be integrated without time consuming work. Thus this study tries to establish a health promotion index model for assisting community health promotion initiatives of local governments. Methods and materials: Literature review, community health specialist consultation and a questionnaire survey was performed. Results: Based on Dever's model, a prototype of health promotion indicators was proposed and modified by the community health specialists. 15 classification scheme of statistical yearbook reorganized into the six areas. Those six areas were comprised in 24 indicator class with 96 specific indicators. Through further modification processes by a questionnaire survey, we developed a health promotion indicator model that contains six areas with 23 indicator class encompassed by 87 specific indicators. Conclusions: This study proposed a model of health promotion indicator comprised in the six areas with 23 indicator classes for measuring small area health promotion status. However, more specific or additional data in human biology, environment, and socioeconomic data is essential for producing a stronger model for health promotion measurement.

• 보존과학연구
• /
• s.30
• /
• pp.47-61
• /
• 2009

Cultural heritages are affected by various environmental factors. Main factors are temperature, humidity, light and indoor air pollutants such as ozone, nitrogen oxides. Especially humidity condition is very important. Low humidity condition can cause contraction and high humidity condition can lead to growth of microorganism. This study is conducted to appraise an applicability of the Humidity Indicator which is one of the simple method for humidity control. The Humidity Indicator shows the humidity conditions through color change. Therefore, photometer was used to correctly measure the color change of Humidity Indicator. As a result of lab test, Humidity Indicators was stabilized after one hour from en exposure in a certain humidity condition and the indicators indicated clear correlations between color changes of Humidity Indicators and humidity conditions. Some Humidity Indicators which had been selected through the lab tests were applied to preservation facilities of cultural heritages and the indicators indicated closed correlations with humidity conditions in indoor of facilities.

• Journal of Korea Soil Environment Society
• /
• v.3 no.1
• /
• pp.83-92
• /
• 1998

This study presents a relationship between gas quantity and measurement resistance using the bubble meter, the water head indicator and the rotor meter from the gas vent sanitary landfill. From the one-dimensional analyses and experiments, the below results have been obtained. The gas volume sourcing from the gas vent depends on the permeability of final cover soil, its cover depth and distance between the gas vents. The total gas volume producing in the interested domain may be accurately measured by the bubble meter, the water head indicator and the rotor meter if the clay is used for the final cover soil. The required times approaching to the steady-state are different with respect to the flow meters, one day is for the bubble meter and the water head indicator and one hour for the rotor meter.