• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.637-644
• /
• 2024

Building Information Modeling (BIM) technology has been widely adopted in the construction industry. However, a challenge encountered in the operational phase is that building object data cannot be updated in real time. The concept of Digital Twin is to digitally simulate objects, environments, and processes in the real world, employing real-time monitoring, simulation, and prediction to achieve dynamic integration between the virtual and the real. This research considers an example related to indoor air quality for realizing the concept of Digital Twin and solving the problem that the digital twin platform cannot be updated in real time. In indoor air quality monitoring, the ventilation rate and the presence of occupants significantly affects carbon dioxide concentration. This study uses the indoor carbon dioxide concentration recommended by the Taiwan Environmental Protection Agency as a reference standard for air quality measurement, providing a solution to the aforementioned challenges. The research develops a digital twin platform using Unity, which seamlessly integrates BIM and IoT technology to realize and synchronize virtual and real environments. Deep learning techniques are applied to process camera images and real-time monitoring data from IoT sensors. The camera images are utilized to detect the entry and exit of individuals indoors, while monitoring data to understand environmental conditions. These data serve as a basis for calculating carbon dioxide concentration and determining the optimal indoor air exchange volume. This platform not only simulates the air quality of the environment but also aids space managers in decision-making to optimize indoor environments. It enables real-time monitoring and contributes to energy conservation.

• Wind and Structures
• /
• v.11 no.1
• /
• pp.35-50
• /
• 2008

Wind and temperature have been shown to be the critical sources causing changes in the modal properties of large-scale bridges. While the individual effects of wind and temperature on modal variability have been widely studied, the investigation about the effects of multiple environmental factors on structural modal properties was scarcely reported. This paper addresses the modeling of the simultaneous effects of wind and temperature on the modal frequencies of an instrumented cable-stayed bridge. Making use of the long-term monitoring data from anemometers, temperature sensors and accelerometers, a neural network model is formulated to correlate the modal frequency of each vibration mode with wind speed and temperature simultaneously. Research efforts have been made on enhancing the prediction capability of the neural network model through optimal selection of the number of hidden nodes and an analysis of relative strength of effect (RSE) for input reconstruction. The generalization performance of the formulated model is verified with a set of new testing data that have not been used in formulating the model. It is shown that using the significant components of wind speeds and temperatures rather than the whole measurement components as input to neural network can enhance the prediction capability. For the fundamental mode of the bridge investigated, wind and temperature together apply an overall negative action on the modal frequency, and the change in wind condition contributes less to the modal variability than the change in temperature.

• Advances in nano research
• /
• v.16 no.6
• /
• pp.623-638
• /
• 2024

This study investigates the thermal post-buckling behavior of concrete eccentric annular sector plates reinforced with graphene oxide powders (GOPs). Employing the minimum total potential energy principle, the plates' stability and response under thermal loads are analyzed. The Haber-Schaim foundation model is utilized to account for the support conditions, while the transform differential quadrature method (TDQM) is applied to solve the governing differential equations efficiently. The integration of GOPs significantly enhances the mechanical properties and stability of the plates, making them suitable for advanced engineering applications. Numerical results demonstrate the critical thermal loads and post-buckling paths, providing valuable insights into the design and optimization of such reinforced structures. This study presents a machine learning algorithm designed to predict complex engineering phenomena using datasets derived from presented mathematical modeling. By leveraging advanced data analytics and machine learning techniques, the algorithm effectively captures and learns intricate patterns from the mathematical models, providing accurate and efficient predictions. The methodology involves generating comprehensive datasets from mathematical simulations, which are then used to train the machine learning model. The trained model is capable of predicting various engineering outcomes, such as stress, strain, and thermal responses, with high precision. This approach significantly reduces the computational time and resources required for traditional simulations, enabling rapid and reliable analysis. This comprehensive approach offers a robust framework for predicting the thermal post-buckling behavior of reinforced concrete plates, contributing to the development of resilient and efficient structural components in civil engineering.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.858-867
• /
• 2018

Analytical modeling equations are proposed for the conventional and modified three-section branch-line couplers. The analytical equations are explicit and capable of determining the characteristic impedance of each branch line for the coupler at desired coupling level as well as the suitability of broadband S-parameters analysis. In addition, a bandwidth extension and miniaturization of three-section branch-line coupler using slow-wave and meandering line structures were designed. The modified coupler, which is able to operate within frequencies from 1.5 to 3.32 GHz has been fabricated, tested and compared. A bandwidth extension of 600 MHz and 53% reduced size of the modified coupler have been achieved compared to a conventional coupler. The modified coupler has roughly insertion loss and coupling of -4 dB and -3.2 dB, while the isolation and return loss, respectively less than -14 dB with fractional bandwidth of 77 %, as well as phase imbalances less than $2^{\circ}$ over the operating bandwidth. Overall, the derived analytical model, simulation and measurement results demonstrated a good agreement.

• Journal of Korea Multimedia Society
• /
• v.9 no.5
• /
• pp.635-648
• /
• 2006

As the advances of Internet infra structure and the support of console and mobile for network games, the industry of online game has been growing rapidly, and the online game traffic in the Internet has been increasing steadily. For design and simulation of game network, the analysis of online game traffic have to be preceded. Therefore a number of papers have been proposed for the purpose of analyzing the traffic data of network games and providing the models. We make and use GameNet Analyzer as a dedicated tool for game traffic measurement and analysis in this paper. We measure the traffic of FPS Quake 3, RTS Starcraft and MMORPG World of Warcraft (WoW), and analyze the packet size, packet IAT(inter-arrival time), data rate and packet rate according to the number of players and in-game behaviors. We also present the traffic models using measured traffic data. These analysis and models of game traffic can be used for effective network simulation, performance evaluation of game network and the design of online games.

• Asian Journal of Atmospheric Environment
• /
• v.4 no.3
• /
• pp.141-149
• /
• 2010

Aerosol size and number concentration were observed in the atmospheric boundary layer over Beijing (from near the ground to 1,200 m) on March 15 (a clear day) and 16 (a dusty day), 2005. The results were further compared with lidar measurements in order to understand the dependency of extinction on the particle size distribution and their vertical changes. The boundary layer atmosphere was composed of several sub-layers, and a dry air layer appeared between 400 and 1,000 m under the influence of dust event. In this dry air layer, the concentration of the fine-mode particles (diameter smaller than $1.0\;{\mu}m$) was slightly lower than the value on the clear day, while the concentration of coarse-mode particles (diameter larger than $1.0\;{\mu}m$) was remarkably higher than that on the clear day. This situation was attributed to the inflow of an air mass containing large amounts of Asian dust particles and a smaller amount of fine-mode particles. The results strongly suggest that the fine-mode particles affect light extinction even in the dusty atmosphere. However, quantitatively the relation between extinction and particle concentration is not satisfied under the dusty atmospheric conditions since laser beam attenuates in the atmosphere with high concentration of particles. Laser beam attenuation effect becomes larger in the relation between extinction and coarse particle content comparing the relation between extinction and fine particle content. To clarify this problem technically, future in situ measurements such as balloon-borne lidar are suggested. Here extinction was measured at 532 nm wavelength. Measurements of extinction at other wavelengths are desired in the future.

• Cartoon and Animation Studies
• /
• s.40
• /
• pp.337-365
• /
• 2015

The objective of this study proposes the new user's addiction model in 'Social Network Games' (SNGs). Research model is derived from the separation of two characteristics. First one is logical characteristics that includes 'Functional' (F), 'Keystroke' (K), and 'Goal' (G). Second one is feeling characteristics that consists a few factors such as 'Emotion' (E), 'Social' (S), and 'Affection' (A). For the pre-test, a total of 30 participants responded to survey in order to inspect the fitness of research questionnaire, roughly validity of the proposed model, and the direction of this reseach. After that for the main test, a total 300 users participated in this research. The final number of effective participants were 261 because 39 were insincere respondents and without playing SNGs who were excluded. Then we examined the measurement model by performing 'Partial Least Squares - Structural Equation Modeling' (PLS-SEM) analysis to test the research hypothesis empirically. The results of the measurement and structural model test lend support to the proposed research model by providing a good fit to the construct data. Interestingly, the model showed the significant effects of the interaction between eleven hypothesis(H1,H2,H3,H4,H5,H6,H7,H8,H9,H10, H12). Only one hypothesis decision t-value not supported that is involved the relationship between SNGs Addiction and Keystroke, H11(1.193). This research expect to contributes to an exploratory SNGs research to clarify the base of addition and will aids understanding of users' behavior associated with SNGs development.

• Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.337-348
• /
• 2016

An experimental approach is presented for the measurement of wear that is common in the threading of cold-forged steel. In this work, the first objective is to measure wear on various types of roll taps manufactured to tapping holes in microalloyed HR45 steel. Different geometries and levels of wear are tested and measured. Taking their geometry as the critical factor, the types of forming tap with the least wear and the best performance are identified. Abrasive wear was observed on the forming lobes. A higher number of lobes in the chamber zone and around the nominal diameter meant a more uniform load distribution and a more gradual forming process. A second objective is to identify the most accurate data-mining technique for the prediction of form-tap wear. Different data-mining techniques are tested to select the most accurate one: from standard versions such as Multilayer Perceptrons, Support Vector Machines and Regression Trees to the most recent ones such as Rotation Forest ensembles and Iterated Bagging ensembles. The best results were obtained with ensembles of Rotation Forest with unpruned Regression Trees as base regressors that reduced the RMS error of the best-tested baseline technique for the lower length output by 33%, and Additive Regression with unpruned M5P as base regressors that reduced the RMS errors of the linear fit for the upper and total lengths by 25% and 39%, respectively. However, the lower length was statistically more difficult to model in Additive Regression than in Rotation Forest. Rotation Forest with unpruned Regression Trees as base regressors therefore appeared to be the most suitable regressor for the modeling of this industrial problem.

• Journal of Internet Computing and Services
• /
• v.21 no.2
• /
• pp.131-138
• /
• 2020

The SBA Integrated Information system is constructed and operated for scientific and systematic management of Defense information utilizing whole process of weapon system acquisition from requirement institution to operation maintenance. In order to utilize m&s resources actively and effectively in the life cycle of weapon system acquisition, efficient management plans of the SBA integrated Information system is required. As a result of identifying usage on SBA Information system and performance of operation performance measurement, it was defined that establishment of the SBA Integrated Information system process and provision of detailed system are mandatory for activating m&s resource and supporting process of acquisitions. In this study, Defense m&s information system is analyzed and improvement plans of SBA Integrated Information system is provided for efficient operation of SBA integrated Information system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.142-148
• /
• 2015

Due to advancements in technology and manufacturing capability, it is not uncommon that life tests yield no or few failures at low stress levels. In these situations it is difficult to analyse lifetime data and make meaningful inferences about product or system reliability. For some products or systems whose performance characteristics degrade over time, a failure is said to have occurred when a performance characteristic crosses a critical threshold. The measurements of the degradation characteristic contain much useful and credible information about product or system reliability. Degradation measurements of the performance characteristics of an unfailed unit at different times can directly relate reliability measures to physical characteristics. Reliability prediction based on physical performance measures can be an efficient and alternative method to estimate for some highly reliable parts or systems. If the degradation process and the distance between the last measurement and a specified threshold can be established, the remaining useful life is predicted in advance. In turn, this prediction leads to just in time maintenance decision to protect systems. In this paper, we describe techniques for mapping product or system which has degrading performance parameter to the associated classical reliability measures in the performance domain. This paper described a general modeling and analysis procedure for reliability prediction based on one dominant degradation performance characteristic considering pseudo degradation performance life trend model. This pseudo degradation trend model is based on probability modeling of a failure mechanism degradation trend and comparison of a projected distribution to pre-defined critical soft failure point in time or cycle.