• Journal of Environmental Science International
• /
• v.27 no.8
• /
• pp.723-735
• /
• 2018

In this study, to investigate an optimal configuration method for the modeling system, we performed an optimization experiment by controlling the types of compilers and libraries, and the number of CPU cores because it was important to provide reliable model data very quickly for the national air quality forecast. We were made up the optimization experiment of twelve according to compilers (PGI and Intel), MPIs (mvapich-2.0, mvapich-2.2, and mpich-3.2) and NetCDF (NetCDF-3.6.3 and NetCDF-4.1.3) and performed wall clock time measurement for the WRF and CMAQ models based on the built computing resources. In the result of the experiment according to the compiler and library type, the performance of the WRF (30 min 30 s) and CMAQ (47 min 22 s) was best when the combination of Intel complier, mavapich-2.0, and NetCDF-3.6.3 was applied. Additionally, in a result of optimization by the number of CPU cores, the WRF model was best performed with 140 cores (five calculation servers), and the CMAQ model with 120 cores (five calculation servers). While the WRF model demonstrated obvious differences depending on the number of CPU cores rather than the types of compilers and libraries, CMAQ model demonstrated the biggest differences on the combination of compilers and libraries.

• Korean Journal of Remote Sensing
• /
• v.23 no.3
• /
• pp.161-169
• /
• 2007

A study was conducted in the Hong Kong with the aim of deriving an algorithm for the retrieval of suspended sediment (SS) and sea surface salinity (SSS) concentrations from Aqua/MODIS level 1B reflectance data with 250m and 500m spatial resolutions. 'In-situ' measurements of SS and SSS were also compared with coincident MODIS spectral reflectance measurements over the ocean surface. This is the first study of SSS modeling in Southeast Asia using earth observation satellite images. Three analysis techniques such as multiple regression, linear regression, and principal component analysis (PCA) were performed on the MODIS data and the 'in-situ' measurement datasets of the SS and SSS. Correlation coefficients by each analysis method shows that the best correlation results are multiple regression from the 500m spatial resolution MODIS images, $R^2$= 0.82 for SS and $R^2$ = 0.81 for SSS. The Root Mean Square Error (RMSE) between satellite and 'in-situ' data are 0.92mg/L for SS and 1.63psu for SSS, respectively. These suggest that 500m spatial resolution MODIS data are suitable for water quality modeling in the study area. Furthermore, the application of these models to MODIS images of the Hong Kong and Pearl River Delta (PRO) Region are able to accurately reproduce the spatial distribution map of the high turbidity with realistic SS concentrations.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.78-87
• /
• 2024

This study aimed to propose an innovative teaching pedagogy using a half-scale body form in apparel design education and evaluate its effectiveness in augmenting students' understanding of ergonomic patterns. Constructed in alignment with Phoenix's (2018) study, which used 3D body scanning and digital editing software, the half-scale body form was created through a five-step process, encompassing body measurement, 3D body modeling, fabrication of a physical half-scale body form, pattern making, and evaluation. Implemented in an undergraduate patternmaking course offered at a 4-year university in the metropolitan Seoul, this instructional approach's effectiveness was gauged through students' course projects and exit interviews. The results underscored the positive impact of the proposed teaching pedagogy on students' grasp of ergonomic pattern development, fostering a keen understanding of diverse body shapes and sizes and the relationship between the human body and garments. Furthermore, it played a role in cultivating positive body image and self-endorsement among students. The research contributes meaningfully by presenting a fresh perspective in apparel design education, seamlessly integrating advanced anthropometric and technological tools into a conventional patternmaking classroom. It offers a novel learning experience for students majoring in apparel, creating a fun and interactive teaching environment.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.3
• /
• pp.68-82
• /
• 2024

The planning stage of laser scanning is crucial for acquiring high-quality 3D source data. It involves assessing the target space's environment and formulating an effective measurement strategy. However, existing practices often overlook on-site conditions, with decisions on scanner deployment and scanning locations relying heavily on the operators' experience. This approach has resulted in frequent modifications to scanning locations and diminished 3D data quality. Previous research has explored the selection of optimal scanner locations and conducted preliminary reviews through simulation, but these methods have significant drawbacks. They fail to consider scanner inaccuracies, do not support the use of multiple scanners, rely on less accurate 2D drawings, and require specialized knowledge in 3D modeling and programming. This study introduces an optimization technique for laser scanning planning using 3D simulation to address these issues. By evaluating the accuracy of scan data from various laser scanners and their positioning for scanning a retaining wall structure in a small-scale building, this method aids in refining the laser scanning plan. It enhances the decision-making process for end-users by ensuring data quality and reducing the need for plan adjustments during the planning phase.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.10
• /
• pp.1005-1013
• /
• 2008

This paper describes a new sensor system for 3D range measurement using the structured infrared light. Environment and obstacle sensing is the key issue for mobile robot localization and navigation. Laser scanners and infrared scanners cover $180^{\circ}$ and are accurate but too expensive. Those sensors use rotating light beams so that the range measurements are constrained on a plane. 3D measurements are much more useful in many ways for obstacle detection, map building and localization. Stereo vision is very common way of getting the depth information of 3D environment. However, it requires that the correspondence should be clearly identified and it also heavily depends on the light condition of the environment. Instead of using stereo camera, monocular camera and the projected infrared light are used in order to reduce the effects of the ambient light while getting 3D depth map. Modeling of the projected light pattern enabled precise estimation of the range. Identification of the cells from the pattern is the key issue in the proposed method. Several methods of correctly identifying the cells are discussed and verified with experiments.

• Journal of the Optical Society of Korea
• /
• v.17 no.6
• /
• pp.525-532
• /
• 2013

Contrary to the academic interests of other existing studies elsewhere, this study deals with how the alignment algorithms such as sensitivity or Differential Wavefront Sampling (DWS) can be better used under effects from field, compensator positioning and environmental errors unavoidable from the shop-floor alignment work. First, the influences of aforementioned errors to the alignment state estimation was investigated with the algorithms. The environmental error was then found to be the dominant factor influencing the alignment state prediction accuracy. Having understood such relationship between the distorted system wavefront caused by the error sources and the alignment state prediction, we used it for simulated and experimental alignment runs for Infrared Optical System (IROS). The difference between trial alignment runs and experiment was quite close, independent of alignment methods; 6 nm rms for sensitivity method and 13 nm rms for DWS. This demonstrates the practical usefulness and importance of the prior error analysis using the alignment algorithms before the actual alignment runs begin. The error analysis methodology, its application to the actual alignment of IROS and their results are described together with their implications.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.9
• /
• pp.828-833
• /
• 2011

A reaction wheel assembly(RWA) is the largest disturbance source that can induce high frequency micro-vibration on an optical payload of satellites. To ensure a tight pointing-stability budget of satellites, the RWA disturbance effect on spacecraft should be accurately analyzed and evaluated for whole design phases. For this purpose, the micro-vibration disturbance of RWA should be precisely measured. In the present study, two measurement methods on RWA micro-vibration disturbances are compared and investigated. One is a free run-down speed test and the other is a constant speed test. The micro-vibration data measured by the two methods are analyzed in terms of spectrum characteristics, static and dynamic imbalance values, and root sum square(RSS) values. The analysis results show that both methods can measure very similar results in time and frequency domains and that the free run-down speed method is more adequate in respects to wheel friction modeling, noise rejection of imbalance and RSS peak evaluation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2033-2048
• /
• 1992

This paper presents the theoretical development and qualitative evaluation of a new concept in the mathematical modeling of dynamic structures. We use both test data and analytical approximations to identify the parameters of an incomplete model. The model has the capability of predicting the response of the points of interest on the structure over the frequency range of interest and can be used to predict the changes in natural frequencies and normal modes due to structural changes. The theory was tested by running simulated tests on a relatively simple structure, identifying the parameters of the incomplete model, and using this model to predict the effects on frequency and mode shapes of several mass and stiffness changes. The conditions of the tests were varied by selecting different numbers of points of measurement, varying the frequency range, and by including assumed measurement error. It is recommended that the theoretical development be continued and that applications to more complex structures be carried out in order to develop a better understanding of the limitations and capabilities of the method. A successful, more definitive sevaluation could lead to immediate practical applications.

• The Journal of Asian Finance, Economics and Business
• /
• v.4 no.3
• /
• pp.75-83
• /
• 2017

This paper examines key determinants and the effect of country-of-origin on customer's purchase intention of functional food and dietary supplement product in Vietnam. Exploratory study was identified to evaluate personal and social factors on customer's buying behavior. Twenty-eight reflective constructs were adapted from literature and designed by using a seven-point Likert scale to facilitate measurement. By using non-probability convenience sampling, data was collected from a survey of 242 Vietnamese who have experienced in buying functional and supplement food. This paper employed partial least square structural equation modeling (PLS-SEM) as a technique employed to analyze the measurement and structural models. The findings provide evidence that social prestige customer perceives and their positive attitude toward functional food which are main factors influencing on consumers' purchase intention. Customer's perceived prestige plays an important role in decision-making process to purchase. The higher social prestige taken up in consumers' mind, the higher consumers' purchase intention is. Moreover, the more positive attitude customer holds toward functional food, the higher consumers' purchase intention. The research results provide useful information in current understanding of what antecedents determine factors influencing customer's intention to purchase functional food and lead to managerial implications for business strategies.

• The Journal of the Korea Contents Association
• /
• v.8 no.10
• /
• pp.208-216
• /
• 2008

The purpose of this study was to investigate the cause-effect relationship between demographic variables and self-efficacy and job stress of occupational therapists through the analysis of structural equation modeling. The survey was completed 164 occupational therapists using questionnaire consisted of demographic variables, job stress and self-efficacy. The results of this study were follows: Firstly, regarding the measurement about reliability and validity of scale of job stress and self-efficacy, all subfactor of self-efficacy and three subfactor of job stress were useful for occupational therapists; Secondly, there were significant correlations between demographic variables and self-efficacy except the correlations between variables job status; Thirdly, the structural equation modeling were employed to identify the relations among demographic variables, self-efficacy and job stress of occupational therapists. Thus the appropriateness of research model was good. This study focused on exploration of the relationship between self-efficacy and job stress through structural equation modeling.