• 한국지반공학회논문집
• /
• 제24권1호
• /
• pp.81-89
• /
• 2008

본 연구에서는 굴착이 진행 중인 터널 시공현장에서 계측변위를 활용하여 신속하게 터널의 안정성을 정량적으로 평가할 수 있는 기법을 새롭게 개발하였다. 이를 위해, 본 연구에서는 Critical strain 개념을 새롭게 도입하였으며, 굴착중인 터널의 안정성 평가에 이를 활용하였다. 본 연구에서 개발한 해석기법은, 굴착면에서의 변위값을 입력하여 주변지반의 변형률을 구하는 방법으로서, 기존에 제안된 해석기법을 재검토하여, 상대변위활용기법, 숏크리트 반영기법, 지반의 이방특성 반영기법을 새롭게 제안하였다. 아울러 본 연구에서 제안한 해석기법을 토대로 해석모듈을 개발하였으며, 개발된 해석모듈의 활용성을 평가하기 위한 검증을 수행하였다. 검증 방법으로는 먼저, 이론해석과 상용프로그램(Pentagon-3D, Flac-2D) 해석을 통해 원형 터널에서의 굴착변위를 서로 비교하여, 상용프로그램의 활용성을 검토하였다. 이어서, 두 종류의 상용프로그램을 활용하여 숏크리트 라이닝의 유무에 따라, 동일한 초기조건에서의 굴착변위를 구하여, 두 상용프로그램의 해석결과를 비교하였다. 마지막으로, 상용프로그램에서 획득한 터널굴착변위를 본 연구에서 개발한 해석모듈(FAST-Ver. 1.2, Feedback Analysis System for Tunneling)에 입력치로 이용하여, 원지반의 하중상태 및 재료특성 등을 추정하고, 추정된 값들이 당초 가정하였던 값들을 얼마만큼 재현할 수 있는지에 대한 검증을 수행하였다.

• Steel and Composite Structures
• /
• 제21권5호
• /
• pp.1105-1119
• /
• 2016

In this study, it is presented that a new developed approach for equivalent area-distributed loading (EADL) induced from a single concentrated force. For the purpose, a full scale 3D steel formwork system was constructed in laboratory conditions. A developed load transmission platform was put on the formwork system and loaded step by step on the mass center. After each load increment, displacement was measured in several crictical points of the system. The developed platform which was put in to slab of formwork to equivalently distribute the load from a point to the whole slab was constituted using I profiles. A 3D finite element model of the formwork system was analyzed to compare numerical displacement results with experimental ones. In experimental tests,difference among the displacements obtained from reference numerical model (model applied EADL) and main numerical model (model applied single load using a load cell via load transmission platform) is about %13 in avarage. Difference among the displacements obtained from experimental results and main numerical model under 30 kN single load is about %11 in avarage. The results revealed that the displacements obtained experimentally and numerically are dramatically closed to each other. It is highlighted from the study that the developed approach is reliable and useful to get EDL.

• Structural Engineering and Mechanics
• /
• 제45권4호
• /
• pp.471-494
• /
• 2013

In this paper, identification of isotropic and orthotropic linear elastic material constitutive parameters has been demonstrated by a FEA-free energy-based inverse analysis method. An important feature of the proposed method is that it requires no finite element (FE) simulation of the tested material. Full-field displacements calculated using digital image correlation (DIC) are used to compute DIC stress fields enforcing the equilibrium condition and DIC strain fields using interpolation functions. Boundary tractions and displacements are implicitly recast into an objective function that measures the energy residual of external work and internal elastic strain energy. The energy conservation principle states that the residual should be zero, and so minimizing this objective function inversely identifies the constitutive parameters. Synthetic data from simulated testing of isotropic materials and orthotropic composite materials under 2D plane stress conditions are used for verification of the proposed method. When identifying the constitutive parameters, it is beneficial to apply loadings in multiple directions, and in ways that create non-uniform stress distributions. The sensitivity of the parameter identification method to noise in both the measured full-field DIC displacements and loadings has been investigated.

• 대한치과보철학회지
• /
• 제37권6호
• /
• pp.791-799
• /
• 1999

The purpose of this study was to investigate the displacements of cast framework by torch soldering and electric soldering techniques. Specimen had two cylinders and connecting bar that had sectioned with 0.3mm gap at mid point. 10 of total specimens were divided into two groups. In torch soldered group, soldering investment block was made and conventional torch solder-ing procedure was carried out. In electric soldered group, electric soldering was carried out on the master cast without soldering investment block by using electric soldering machine(Dentapunkt DP 7, Kulzer, Germany) After soldering procedure, three dimensional coordinates of two centroids of each cylinder were measured by three dimensional coordinate measuring machine. The intercentroidal displacement and global displacement were calculated and then, these values were compared and evaluated. The results were obtained as follows: 1. Intercentroidal distances of specimens decreased after both soldering procedures, and the decrease in intercentroidal distance was greater for torch soldered group than for electric soldered group 2. Global displacements of torch soldered group were greater than those of electric soldered group.

• Smart Structures and Systems
• /
• 제5권4호
• /
• pp.495-505
• /
• 2009

Bridges form crucial links in the transportation network especially in high seismic risk regions. This research aims to provide a quantitative methodology for post-earthquake performance evaluation of the bridges. The experimental portion of the research involved shake table tests of a 4-span bridge which was subjected to progressively increasing amplitudes of seismic motions recorded from the Northridge earthquake. As part of this project, a high resolution long gauge fiber optic displacement sensor was developed for post-seismic evaluation of damage in the columns of the bridge. The nonlinear finite element model was developed using Opensees program to simulate the response of the bridge and the abutments to the seismic loads. The model was modified to predict the bent displacements of the bridge commensurate with the measured bent displacements obtained from experimental analysis results. Following seismic events, the tangential stiffness matrix of the whole structure is reduced due to reduction in structural strength. The nonlinear static push over analysis using current damaged stiffness matrix provides the longitudinal and transverse ultimate capacities of the bridge. Capacity loss in the transverse and longitudinal directions following the seismic events was correlated to the maximum displacements of the deck recorded during the events.

• 한국지반공학회지:지반
• /
• 제13권1호
• /
• pp.123-136
• /
• 1997

구조물의 형상 변화를 연속적으로 고려할 수 있는 유한요소법 원리에 기초하여 탄성지반내에 단계적 터널굴착시 임의의 굴착단계에서 발생한 증분변위와 굴착전 암반내에 존재하는 초기응력의 크기가 선형관계에 있음을 유도하였다. 즉, 총변위가 아닌 임의 단계에서 계측된 증분변위만으로 탄성지반내 초기음력의 역산이 가능함을 이론적으로 증명하였다. 이러한 이론적 관계식에 기초하여 다단계 터널굴착시 계측된 증분변위를 이용하여 초기응력을 역산할 수 있는 역해석 프로그램을 작성하였다. 간단한 예제를 통하여 구성한 프로그램의 정확성과 현장 적용 가능성을 검토하였다.

• Structural Engineering and Mechanics
• /
• 제72권2호
• /
• pp.217-227
• /
• 2019

The methodology known as "shape sensing" allows the reconstruction of the displacement field of a structure starting from strain measurements, with considerable implications for structural monitoring, as well as for the control and implementation of smart structures. An approach to shape sensing is based on the inverse Finite Element Method (iFEM) that uses a variational principle enforcing a least-squares compatibility between measured and analytical strain measures. The structural response is reconstructed without the knowledge of the mechanical properties and load conditions but based only on the relationship between displacements and strains. In order to efficiently apply iFEM to the most common structural typologies of civil engineering, its formulation according to the kinematical assumptions of the Bernoulli-Euler theory is presented. Two beam inverse finite elements are formulated for different loading conditions. Depending on the type of element, the relationship between the minimum number of required measurement stations and the interpolation order is defined. Several examples representing common applications of civil engineering and involving beams and frames are presented. To simulate the experimental strain data at the station points and to verify the accuracy of the displacements obtained with the iFEM shape sensing procedure, a direct FEM analysis of the considered structures is performed using the LUSAS software.

• 지질공학
• /
• 제19권3호
• /
• pp.261-268
• /
• 2009

터널 굴착 중 수행되는 계측은 구성 지반의 거동을 가시화하여 안정성을 평가할 수 있는 중요한 정보를 제공한다. 일반적으로 계측은 터널 굴착면 형성 초기에 집중적으로 수행되며, 시간이 경과할수록 계측횟수를 줄여 나간다. 하지만 이러한 계측 기준 및 관리 지침은 획일적이며 뚜렷한 정량적 기준이 부족한 실정이다. 본 연구에서는 굴착 초기 발생하는 변위의 안정화 시점의 정량적 판단과 안정화 이후의 미세한 변위 변동 특성 분석 및 이상거동 평가를 위해 통계 관리도 기법을 적용하였다. 계측변위에 대한 이동범위(MR) 관리도 및 누적합(CUSUM) 관리도를 작성하여 변위 평가 가능성을 검토하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1996년도 가을 학술발표회 논문집
• /
• pp.71-80
• /
• 1996

• Structural Engineering and Mechanics
• /
• 제68권5호
• /
• pp.563-573
• /
• 2018

Temperature-induced responses, such as strains and displacements, are related to the boundary conditions. Therefore, it is required to determine the boundary conditions to establish a reliable bridge model for temperature-induced responses analysis. Particularly, bridge bearings usually present nonlinear behavior with an increase in load, and the nonlinear boundary conditions cause significant effect on temperature-induced responses. In this paper, the bridge nonlinear boundary conditions were simulated as bilinear translational or rotational springs, and the boundary parameters of the bilinear springs were identified based on the measured temperature-induced responses. First of all, the temperature-induced responses of a simply support beam with nonlinear translational and rotational springs subjected to various temperature loads were analyzed. The simulated temperature-induced strains and displacements were assumed as measured data. To identify the nonlinear translational and rotational boundary parameters of the bridge, the objective function based on the temperature-induced responses is then created, and the nonlinear boundary parameters were further identified by using the nonlinear least squares optimization algorithm. Then, a beam structure with nonlinear translational and rotational springs was simulated as a numerical example, and the nonlinear boundary parameters were identified based on the proposed method. The numerical results show that the proposed method can effectively identify the parameters of the nonlinear boundary conditions. Finally, the boundary parameters of a real arch bridge were identified based on the measured strain data and the proposed method. Since the bearings of the real bridge do not perform nonlinear behavior, only the linear boundary parameters of the bridge model were identified. Based on the bridge model and the identified boundary conditions, the temperature-induced strains were recalculated to compare with the measured strain data. The recalculated temperature-induced strains are in a good agreement with the real measured data.