• 제목/요약/키워드: meandered structure

검색결과 5건 처리시간 0.021초

Multiband Meandered Monopole Antenna for Mobile Applications

  • Lee, Jae-Kwan;Pyo, Seong-Min;Kim, Young-Sik
    • ETRI Journal
    • /
    • 제32권3호
    • /
    • pp.475-478
    • /
    • 2010
  • A multiband meandered monopole antenna is proposed for digital video broadcasting handheld (DVB-H), global positioning system, personal communications service, wireless broadband (Wibro), and wireless local area network (WLAN) applications. The proposed antenna consists of a meandered line, a shorted length strip line, and a conductor strip between a meandered line and a microstrip feed line. By tuning a short strip and a conductor, a multiband impedance matching is achieved. The proposed antenna has an omnidirectional radiation and yields an antenna gain of greater than -3 dBi in the DVB-H band and 4.5 dBi in the Wibro and WLAN bands. Details of the proposed antenna design and experimental results are presented.

다이버시티 안테나의 소형화와 격리도 향상을 위한 미앤더 선로와 개방형 루프가 결합된 방사구조의 설계 (Design of the Open-Loop Combined Meandered-Line 1-Layer Radiator for Diversity Antennas with Size-Reduction and Improved Isolation)

  • 목세균;강승택;김용진
    • 전기학회논문지
    • /
    • 제61권1호
    • /
    • pp.110-116
    • /
    • 2012
  • This paper proposes a new diversity antenna which is the base of MIMO, tunable and reconfigurable antennas. The antenna has a small size and high inter-antenna isolation resulting from the compact radiating element comprising a meandered line and an open-loop combined in one limited uniplanar space and a modified T-shaped decoupling structure, respectively. In a WiMAX band, the radiating element and the entire antenna are $0.092{\lambda}$ and $0.2216{\lambda}$ in size, which shows effective size-reduction and the gain and efficiency of the proposed antenna attached to the ground of a handheld device are 3.7dBi and 56% acceptable to the industrial standard.

미디어플로대역을 포함하는 단말기용 다중 대역 내장형 안테나의 설계 (Design of Multi-Band Internal Antenna for Handset Applications Including Media-FLO Band)

  • 이현규;이병제
    • 한국ITS학회 논문지
    • /
    • 제7권3호
    • /
    • pp.48-55
    • /
    • 2008
  • 본 논문에서는 무선인터넷 통신 대역으로 부각되고 있는 WiBro/ WiMAX 대역과 Media-FLO/ S-DMB 대역과 같이 중요한 통신대역을 포함하는 다중 대역 내장형 안테나를 제안하였다. 제안된 안테나는 광대역 모노폴 형태의 안테나 구조를 이용하여 높은 주파수 대역에서 광대역 특성을 가지며 새로운 서비스 대역에 대해 적용 할 수 있도록 하였다. 또한 미앤더 방사체를 광대역 안테나 위에 적층시켜 각각의 다른 전류 길이를 확보하였고, 각 주파수 대역에 대한 방사체의 공간을 효과적으로 사용하였다. 제안된 안테나의 대역폭은 정재파비 3:1을 기준으로 저주파수 대역에서 270 MHz, 고주파수 대역에서 2032 MHz를 가진다. 이러한 임피던스 대역폭은 현재 상용화되고 있는 대부분의 서비스 대역인 Media-FLO, CDMA, GSM, GPS, DCS, PCS, UMTS, WiBro, WiMAX, S-DMB에서 효과적으로 동작하는 것을 확인하였다.

  • PDF

이중공진 소형 칩 Meander 안테나에 관한 연구 (A Study on the Small Chip Meander Antenna for Dual-frequency Operation)

  • 김현준;권세웅;심성훈;강종윤;윤석진;김현재;윤영중
    • 한국전자파학회논문지
    • /
    • 제13권7호
    • /
    • pp.633-640
    • /
    • 2002
  • 본 논문에서는 이중공진 칩 meander 안테나를 제안하였다. 제안된 안테나는 기존 meander 안테나의 소형화 특성을 유지하면서 인접한 주파수에서 이중공진하는 특징을 갖는다. LTCC-MLC 공정을 이용하여 제작하였고, 2.20 GHz와 2.883 GHz에서 이중공진(주파수비=1.35)하며, meander 패치의 크기는 15.7 mm $\times$ 6.52 mm( 0.32 λg $\times$ 0.133 λg)이다. 그리고 이중공진 meander 안테나의 추가적인 소형화를 위해 3차원 구조를 제안한다. 이 3차원 구조를 이용하여 약 50 %의 크기를 추가적으로 소형화하였다. 전류분포를 통해 제안된 안테나가 이중공진하는 원리를 확인하였고, 제작된 안테나의 반사손실 및 방사패턴의 특성을 분석하였다.

CMOS 공정 기반의 X-대역 위상 배열 시스템용 다기능 집적 회로 설계 (Design of CMOS Multifunction ICs for X-band Phased Array Systems)

  • 구본현;홍성철
    • 대한전자공학회논문지TC
    • /
    • 제46권12호
    • /
    • pp.6-13
    • /
    • 2009
  • X-대역의 위상 배열 시스템에 응용 가능한 전력 증폭기, 6-bit 위상 변위기, 6-bit 디지털 감쇠기 및 SPDT 송수신 스위치를 각각 설계 및 측정하였다. 모든 회로는 CMOS 0.18 um 공정을 사용하여 구현되었다. 전력 증폭기는 2-단 차동 및 cascode 구조를 가지며, 20 dBm 의 P1dB, 19%의 PAE 의 성능을 8-11 GHz 주파수 대역에서 보였다. 6-bit 위상 변위기는 Embedded switched filter 구조를 가지며, 스위치용 nMOS 트랜지스터 및 마이크로스트립 선로로 인덕턴스를 구현하였다. $360^{\circ}$ 위상 제어가 가능하며 위상 해상도는 $5.6^{\circ}$ 이다. 8-11 GHz 주파수 대역에서 RMS phase 및 amplitude 오차는 $5^{\circ}$ 및 0.8 dB 이하이며, 삽입손실은 약 $-15.7\;{\pm}\;1,1\;dB$ 이다. 6-bit 디지털 감쇠기는 저항 네트워크와 스위치가 결합된 Embedded switched Pi-및 T-구조이며, 위상 배열 시스템에서 요구하는 낮은 통과 위상 변동 특성을 가지는 구조가 적용되었다. 최대 감쇠는 31.5 dB 이며 진폭 해상도는 0.5 dB 이다. 8-11 GHz 주파수 대역에서 RMS amplitude 및 phase 오차는 0.4 dB 및 $2^{\circ}$ 이하이며, 삽입손실은 약 $-10.5\;{\pm}\;0.8\;dB$ 이다. SPDT 송수신 스위치는 series 및 shunt nMOS 트랜지스터의 쌍으로 구성되었으며 회로의 면적을 최소화하기 위해 1개의 수동 인덕터만으로 SPDT 기능을 구현하였다. 삽입손실은 약 -1.5 dB, 반사손실은 -15 dB 이하이며, 송수신 격리 특성은 -30 dB 이하이다. 각각의 칩 면적은 $1.28\;mm^2$, $1.9mm^2$, $0.34\;mm^2$, $0.02mm^2$ 이다.