• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2617-2624
• /
• 2012

Interferential currents (IFC) and transcutaneous electrical nerve stimulation (TENS) are used for pain management. This study compared the analgesic effects of IFC and TENS on experimentally induced ischemic pain in otherwise pain-free subjects using a modified version of the submaximal-effort tourniquet technique. The subjects were 14 volunteers (7 male, 7 female) without known pathology that could cause pain. Their mean age was $26.7{\pm}2.0$ years. A single-blind, sham controlled, parallel-group method was used. The primary outcome measure was the change in the self-report of pain intensity during 1 of 3 possible interventions: (1) IFC, (2) TENS, or (3) sham electrotherapy. The IFC and TENS were administered on the forearm, and the sham electrotherapy group received no current output via a dummy stimulator. The results show that a 2-way repeated-measures analysis of variance revealed that there was no change in pain intensity during treatment when all 3 groups were considered together. The mean to pain intensity with the IFC intervention was no different than with TENS. Thus, Statistical analysis showed that both interventions decreased the pain intensity ratings significantly and the difference between interventions was not simply insignificant. IFC has been shown to be more comfortable than TENS in present studies and is likely to be better accepted and tolerated by patients, clinical investigation is warranted.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.1
• /
• pp.26-39
• /
• 2007

In recent years, rate control is an important technique in real time video communication applications using H.264/AVC. Many existing rate control algorithms employ the quadratic rate-distortion model, which is determine the target bits for each P frame. In this paper, a new rate control algorithm for transmission of H.264/AVC video bit stream through CBR(Constant Bit Rate) channel is proposed. The proposed algorithm predicts an adaptive QP(Quantization Parameter) for improving video distortion, due to high motion and abruptly scene change, which target bit rate and MAD(Mean of Absolute Difference) for current frame considering image complexity variance between previous and current frames. Additionally, it uses frame skip technique to maintain bit stream within a manageable range and protect buffer from overflow or underflow. Experimental results show that the proposed method gives a quality improvement of about 0.5dB when compared to previous rate control algorithm. Also our proposed algorithm encodes the video sequences with less frame skipping compared to the existing rate control for H.264/AVC.

• Geotechnical Engineering
• /
• v.10 no.2
• /
• pp.121-140
• /
• 1994

This paper presents the probabilistic model to evaluate the three-dimensional stability of layered deposits and c-0 soil slopes. Rotational slides are assumed with a cylindroid control part terminated with plane ends. And the potential failure surfaces in this study are assumed with the logarithmic spiral curve refracted at boundary of layers. This model takes into consideration the spatial variabilities of soil properties and the uncertainties stemming from insufficient number of samples and the discrepancies between laboratory measured and in -situ values of shear strength parameters. From the probabilistic approxi mate method (FOSM and SOSM method), the mean and variance of safety factor are calculated, respectively. And the programs based on above models is developed and a case study is analysed in detail to study the sensitivity of results to variations in different parameters by using the programs developed in this study. On the basis of thin study the following conclusions could be stated : (1) The sensitivity analysis shown that the probability of failure is more sensitive to the uncertainty of the angle of internal friction than that of the cohesion, (2) The total 3-D proability of failure and the critical width of failure are significantly affected by total width of slope. It is found that the total 3-D probability of failure and the critical width of failure increase with increasing the slope width when seismic forces do not exist and the total 3-D probability of failure increases with increasing the slope width and the critical width of failure decreases when seismic intensity is relatively large, (3) A decrease in the safety factor (due to effect such as a rise in the mean ground water level, lower shear strength parameters, lower values for the correction factors, etc.) would result in reduction in the critical width of failure.

• Journal of Korea Port Economic Association
• /
• v.27 no.2
• /
• pp.217-240
• /
• 2011

In this study, vector autoregressive and vector error correction models in the short-run dynamics are considered to analyze the effect of the changes in international crude oil prices on Baltic dry index, Baltic Capesize index and Baltic Panamax index, and the intercorrelations between Capesize and Panamax prices, respectively. First, using the vector autoregressive model, the changes in international crude oil price have a statistically significant positive effect for Capesize at lag 1, for Panamax a significant negative effect at lag 3 and a significant positive effect for Baltic dry index at lag 1. From the impulse response analysis, the international crude oil price causes Baltic dry index to increase in the sort-run and the effect converges on the mean after 3 months. Second, using the vector error correction model, the empirical results for the spillover effects between Capesize and Panamax markets provide that in the case of the deviation from a long-run equilibrium the Panamax price is adjusted toward decreasing. The increases in freight rates of the Capesize market at lag 1 lead to increase the freight rates in Panamax market at present. The Panamax responses from the Capesize shocks increase rapidly for 3 months and the effect converges on the mean after 5 months. The Capesize responses from the Panamax shocks are relatively small, and increase weakly for 3 months and the effect disappears thereafter.

• Journal of Technologic Dentistry
• /
• v.40 no.4
• /
• pp.217-224
• /
• 2018

Purpose: The aim of this study was to evaluate accuracy of three type complete mandibular denture of before and after polymerization. Methods: Mandibular edentulous model was selected as the master model. 15 study models were made by Type IV stone. Wax complete mandibular dentures were produced by the denture base and artificial teeth. Before and after curing, STL files were obtained using a blue scanner. By superimposing the digitized complete mandibular denture data(after curing) with the CAD-reference(before curing) three-dimensionally, visual fit-discrepancies were drawn by calculating the root mean square (RMS) and visualized on a color-difference map. Each calculated RMS-value was statistically analyzed by 1-way analysis of variance(ANOVA) (${\alpha}=.05$). Results: Mean(SD) RMS-values was OM group $88.98(6.10){\mu}m$, BM group $82.35(13.46){\mu}m$, BDM group $77.83(9.46){\mu}m$. The results of the 1-way ANOVA showed no statistically significant differences in the RMS values of the Three groups for the material (P > .241). Conclusion : Deformation of artificial teeth position was observed in all groups after resin polymerization. But the values, all group were within the clinically acceptable range. The values of BDM group showed the least deformation than the other two groups.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.4
• /
• pp.218-233
• /
• 2022

The long-term (1986~2020) predictability of the number of days of heat and cold damages for each growth stage of soybean is evaluated using the daily maximum and minimum temperature (Tmax and Tmin) data produced by Pusan National University Coupled General Circulation Model (PNU CGCM)-Weather Research and Forecasting (WRF). The Predictability evaluation methods for the number of days of damages are Normalized Standard Deviations (NSD), Root Mean Square Error (RMSE), Hit Rate (HR), and Heidke Skill Score (HSS). First, we verified the simulation performance of the Tmax and Tmin, which are the variables that define the heat and cold damages of soybean. As a result, although there are some differences depending on the month starting with initial conditions from January (01RUN) to May (05RUN), the result after a systematic bias correction by the Variance Scaling method is similar to the observation compared to the bias-uncorrected one. The simulation performance for correction Tmax and Tmin from March to October is overall high in the results (ENS) averaged by applying the Simple Composite Method (SCM) from 01RUN to 05RUN. In addition, the model well simulates the regional patterns and characteristics of the number of days of heat and cold damages by according to the growth stages of soybean, compared with observations. In ENS, HR and HSS for heat damage (cold damage) of soybean have ranged from 0.45~0.75, 0.02~0.10 (0.49~0.76, -0.04~0.11) during each growth stage. In conclusion, 01RUN~05RUN and ENS of PNU CGCM-WRF Chain have the reasonable performance to predict heat and cold damages for each growth stage of soybean in South Korea.

• Journal of The Korean Association For Science Education
• /
• v.40 no.3
• /
• pp.253-269
• /
• 2020

This study aims to develop items to diagnose pre-service physics teachers' understanding of the conceptual knowledge of modern physics, based on the achievement criteria presented in the 2015 revised national science curriculum, and to identify the validity and reliability of the newly developed items. Data were collected from 467 pre-service physics teachers in the Physical Education Department or Science Education Department (Physics Education Major) of 15 universities across the nation. In this study the content validity, substantive validity, the internal structure validity, generalization validity, and the external validity proposed by Messick (1995) were examined by various statistical tests. The results of the MNSQ analysis showed that there was no nonconformity in the 23 items. The internal structure validity was confirmed by the standardized residual variance analysis, which shows that the 22 items was unidimensional. The generalization validity was confirmed by differential item functioning (DIF) analysis about groups lectured or not modern physics/quantum mechanics. In addition, item analysis and test analysis based on classical test theory were performed. The mean item difficulty is 0.66, mean item discrimination is 0.47 and mean point biserial coefficient obtained was 0.41. These results for item parameters satisfied the criteria respectively. The reliability of the internal consistency of the KR-20 is 0.77 and the Ferguson's delta obtained was δ = 0.972. By Rasch model analysis, the item difficulty (item measures) was discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.2
• /
• pp.151-162
• /
• 2012

Analysis for back fat thickness (BFAT) and daily body weight gains from birth to the end of a performance test were conducted to find an optimal method for estimation of weaning age effects and to ascertain impacts of weaning age on the growth performance of purebred Berkshire pigs from a closed population in Korea. Individual body weights were measured at birth (B), at weaning (W: mean, 22.9 d), at the beginning of the performance test (P: mean, 72.7 d), and at the end of the performance test (T: mean, 152.4 d). Further, the average daily gains in body weight (ADG) of 3,713 pigs were analyzed for the following periods: B to W (DGBW), W to P (DGWP), P to T (DGPT), B to P (DGBP), B to T (DGBT), and W to T (DGWT). Weaning ages ranged from 17 to 34 d, and were treated as fixed (WF), random with (WC) and random without (WU) consideration of an empirical relationship between weaning ages in the models. WF and WC produced the lowest AIC (Akaike Information Criterion) and least fractions of error variance components in multi-traits analysis, respectively. The fractions of variances due to diverse weaning age and the weaning age correlations among ADGs of different stages (when no overlapping allowed) by WC ranged from 0.09 to 0.35 and from -0.03 to 0.44, respectively. The maximum weaning age effects and optimal back fat thicknesses were attained at weaning ages of 27 to 32 d. With the exception of DGBW, the effects of weaning age on the ADGs increased (ranging from 1.50 g/d to 7.14 g/d) with increased weaning age. In addition, BFAT was reduced by 0.106 mm per increased day in weaning age. In conclusion, WC produced reasonable weaning age correlations, and improved the fitness of the model. Weaning age was one of crucial factors (comparable with heritability) influencing growth performance in Berkshire pigs. Further, these studies suggest that increasing weaning age up to 32 d can be an effective management strategy to improve growth performance. However, additional investigations of the costs and losses related to extension of the suckling period and on the extended range of weaning age are necessary to determine the productivity and safety of this practice in a commercial herd and production system.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.2
• /
• pp.85-90
• /
• 2009

STATEMENT OF PROBLEM. Over the years, resin-bonded fixed partial dentures (RBFPDs) have gone through substantial development and refinement. Several studies examined the biomechanics of tooth preparation and framework design in relation to the success rate of RBFPDs and considered retention and resistance form essential for increase of clinical retention. However, these criteria required preparations to be more invasive, which violates not only the original intentions of the RBFPD, but may also have an adverse effect on retention due to loss of enamel, an important factor in bonding. PURPOSE. The object of this in vitro study was to compare the dislodgement resistance of the new types of RBFPDs, the conventional three-unit fixed partial denture, and conventional design of RBFPD (Maryland bridge). MATERIAL AND METHODS. Fifty resin mandibular left second premolars and second molars were prepared on dentiforms, according to the RBFPD design. After model fabrication (five group, n = 10), prostheses were fabricated and cemented with zinc phosphate cement. After cementation, the specimens were subjected to tensile loading at a cross head speed of 4 mm/min in a universal testing machine. The separation load was recorded and analyzed statistically using one-way analysis of variance followed by Duncan's multiple range test. RESULTS. Group V, the pin-retained RBFPDs, had the highest mean dislodgement resistance, whereas specimens of group II, the conventional RBFPDs, exhibited a significantly lower mean dislodgement resistance compared to the other 4 groups (P <.05). There were no significant differences between group I, III, and IV in terms of dislodgement resistance (P>.05). Group V had the highest mean MPa (N/$mm^2$) (P <.05). There was no significant difference between groups I, II, III and IV (P > .05). CONCLUSION. Within the limits of the design of this in vitro study, it was concluded that: 1. The modified RBFPDs which utilizes the original tooth undercuts and requires no tooth preparation, compared with the conventional design of RBFPDs, has significantly high dislodgement resistance (P < .05). 2. The modified RBFPDs which utilizes the original tooth undercuts and requires minimal tooth preparation, compared with the conventional FPDs, has significantly no difference in retention and dislodgement resistance)(P>.05). 3. The pin-retained FPDs showed a high dislodgement resistance compared to the conventional three-unit FPDs (P<.05).

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.2
• /
• pp.363-372
• /
• 2016

Two-stage sample designs are commonly used for household surveys in Korea using as clusters the enumeration districts (EDs). Since clustering decomposes the population variation into within- and between-cluster variations, the sample sizes allocated in stages can affect the overall precision. Alternative clusters are often considered due to diverse reasons such as the EDs' limitation in size, being out-of-date, and in-assessibility to their household lists. In addition, the EDs are currently under development by the Statistics Korea as an joint effort toward their transition from the traditional practice to the register census from 2015. We present an approach for evaluating the difference in the precision of the mean estimators of the sets of the cluster units in between a hierachical and nested form, where the design effect is used to reflect the effect of the clustering and the sample allocation. We also demonstrate our approach using the U.S. Census counts from the year 2000 for Anne Arundel County in Maryland. Our research shows that the within-cluster variance can be significantly different for survey variables and thus the choice of cluster units and the associated sample allocation scheme should reflect the corresponding variance decomposition due to clustering.