• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제46권6호
• /
• pp.379-384
• /
• 2020

Objectives: We sought to identify a clinically useful method of analyzing orbital dystopia to aid in diagnosis and treatment planning and to quantify vertical discrepancies in eye level and variations in canthal tilt in Koreans. Patients and Methods: In 76 Korean patients with a mean age of 23.12 years, mean differences in the level of the pupils, lateral canthi, medial canthi, and canthal tilt were measured. The difference in pupil level was calculated from the perpendicular lines drawn from the midpupil area of each eye to the midline of the face to determine the amount of skeletal discrepancy of the eye. Soft tissue discrepancies were determined according to the vertical difference between the lines drawn from the lateral or medial canthus of each eye perpendicular to the midline of the face. The canthal tilt was determined from the inclination of a line connecting the lateral and medial canthi, then classified as class I, II, or III. Results: Mean differences in pupil level, medial canthi, and lateral canthi were 1.57±1.10 mm, 1.14±1.07 mm, and 2.03±1.64 mm, respectively. The mean degree of canthal tilt were 8.45°±3.53° for the right side and 8.42°±3.81° for the left side. No study participants presented with class III canthal tilt. The mean canthal tilt values for those with class I tilt were 3.21°±1.68° for the right side and 3.18°±1.63° for the left side, while, for those who had class II tilt, the values were 9.60°±3.66° for the right side and 9.54°±2.99° for the left side. Conclusion: The presented diagnostic method of orbital dystopia can be used to effectively establish a treatment plan that takes into consideration the patient's skeletal and soft-tissue discrepancies.

• 대한인간공학회지
• /
• 제4권1호
• /
• pp.17-25
• /
• 1985

To evaluate the values of Aerobic on Deong-Deokoong Gymnastic that is variated Korean folk dance, 9 college women (from Soph. to Junior) who learned Korean Dance for 2 hours by week were volunteered as subjects from Sept. 1st to Nov. 3rd, 1984. Heart- rate of Deong-Deokoong Gymnastic performances recorded by 8 channel poly-graph system. 1. Critical values of Heart Rate in healthy college women is 142.54 bpm (mean). 2. Mean H.R. of Deong-Deokoong the 1st is $166.5{\pm}13.19bpm$, the 2nd is $164.06{\pm}13.93bpm$, the 3rd is $145.89{\pm}18.81bpm$, and the 4th is $151.5{\pm}16.7bpm$. 3. The ratio (%) of exercise H.R. by that of Maximum in Deong-Deokoong the 1st is $82.27{\pm}9.78%$, the 2nd is $79.91{\pm}8.65%$, the 3rd is $76.13{\pm}8.65%$, the 3rd is $76.13{\pm}9.15%$, and the 4th is $76.18{\pm}9.41%$. 4. Deong-Deokoong Gymnastic has the optimum load intensity as on aerobic function training program.

• 수산해양기술연구
• /
• 제50권4호
• /
• pp.551-555
• /
• 2014

ADCPs have been widely used to estimate the dynamic characteristics and biomass of sound scattering layers (SSLs), and swimming speed of fish schools for analyzing SSLs spatial distribution and/or various behavior patterns. This result showed that the verification of the mean volume backscattering strength (MVBS or averaged SV, dB) acquired by the ADCP would be necessary for a quantitative analysis on the spatial distribution and the biomass estimation of the SSLs or fish school when ADCP is used for estimating their biomass. In addition, the calibrated sphere method was used to verify values of each MVBS obtained from 4 beams of ADCP (153.6 kHz) on the base of 3 frequencies (38, 120, 200 kHz) of Scientific echo sounder's split beam system. Then, the measured SV values were compared and analyzed in its Target Strength (TS, dB) values estimated by a theoretical acoustic scattering model.

• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.71-77
• /
• 2010

Although the problems of defects and nonmetallic inclusion in metal fatigue are very complicated, it is particularly important to view these problems from the perspective that defects and inclusions are virtually equivalent to small cracks. This concept will help one to understand various fatigue phenomena caused by Ductile Cast Iron. For different ferrite-pearlite matrix structure, containing more than 90% spheroidal ratio of graphite, GCD 45-3, GCD 50, GCD 60 series and 70%, 80%, 90% spheroidal ratio of graphite, GCD 40, GCD 45-1, GCD 45-2 series, this paper has carried out image analyzer, estimated maximum and mean size of graphite, investigated correlation. It was concluded as follows. (1) A good quality of Ductile cast iron using in this experiment, the graphite was separated well. The effect of the interaction by graphite was verified by microscopic observation and by fracture mechanics investigation in surface, interior of the specimen. (2)${\sqrt{area}}_{max}$ of graphite can be used to predict fatigue limit of Ductile Cast Iron. The Statistical distribution of extreme values of ${\sqrt{area}}$ may be used as a guide line for the control of inclusion size in the steel making processes.

• 음성과학
• /
• 제7권1호
• /
• pp.77-87
• /
• 2000

Distortion Product Otoacoustic Emissions (DPOAEs) can be measured in the external ear canal two fold: amplitude and latency, but most DPOAE studies deal with amplitude aspects. The purpose of this study was to investigate the latency of the 2f1-f2 DPOAEs in ears with hearing losses and to see if it could be a clinically useful method to distinguish normal from abnormal ears. For this purpose, DPOAE latency were measured as a function of frequency from 1 to 8 kHz in 30 ears with conductive and sensorineural hearing losses (SNHLs). DPOAEs were recorded with Otodynamic Analyzer ILO92. Results showed that the latency decreased as the frequency increased up to 8 kHz. The mean values of DPOAE latency for ears of SNHLs were shorter at all frequencies when they were compared to the mean values of normal ears. The latency in ears of conductive hearing losses was shorter than normal ears at the selective frequencies, as well. The results support the hypothesis that latency values are shorter in pathological ears.

• 말소리와 음성과학
• /
• 제5권3호
• /
• pp.55-60
• /
• 2013

The purpose of this study was to investigate the acoustic characteristics of crying infants according to the communication intents such as hunger and pain in terms of acoustic differences in the fundamental frequency ($F_0$), jitter, shimmer, noise-to-harmonic ratio(NHR), habitual pitch, and intensity. The subjects were 20 healthy, normal infants, less than seven days old, from the city of Seoul and were born after 38 to 42 weeks(full term) of pregnancy. The sound of crying was recorded for three minutes. The crying due to pain was induced by means of the inborn metabolism error test, whereas the crying due to hunger was verified by means of the rooting reflex by waiting for the designated eating time. The results were as follows: (1) the fundamental frequency, noise-to-harmonic ratio(NHR), and intensity of the infants' crying due to pain was higher than that by hunger, showing a significant difference between the mean values. (2) the infants' crying due to hunger and that by pain did not have a significant difference in the mean jitter and shimmer values but both of them were largely outside of the normal threshold values(jitter by 1.04% and shimmer by 3.81%). This study was significant in the sense that it showed the acoustic characteristics of infants' crying from hunger and pain were very different from each other according to the communication intents in terms of the six acoustic parameters.

• 대한가정학회지
• /
• 제18권4호
• /
• pp.31-39
• /
• 1980

The basic pattern of skirt should be functional in addition to be fit the body. The author paid special attention to the expansion and contraction of the shell which were made the lower trunk and thigh caused by sitting motions. The replicas of the shell were taken by using a gypsum method on 1 female under 4 standardized motions; standing motion, (basic motion), sitting on the chair with flextion 90' at the hip and the knee joints sitting with dropping knees, and sitting with benting legs side wards. Those replicas obtained were developed to the patterns and changes in shape and area of those were measured. Typical displacement and transformation of the shell surface patterns were showed geographycally fig 5-1 to 5-4. mean values of expansion and constriction were obtained by measuring the shell surface on 60 female under the 4 motions. the mean values of it were showed numerically in Table 1-1 to 1-3. The following results were obtained; 1. Vertical constriction of front of the shell were observed near sulcus in guinalis, and vertical extension were near the knees. Horizontal extension were observed near the thighs and the knees. 2. Vertical constrictions of the back of the shell were observed near the knees. It seemed to be influnced the flexion angles of knee points. vertical extension were near gluteus and thighs. Horizontal constriction were small, and horizonlal extension were near gluteus. 3. The high rates of constriction and extension were found near sulcus in guinalis, glutes, and knees. 4. The rates of constriction and extension on the waist line were very low. 5. The highest values of constriction and extension were found in hip and knees.

• 가정과삶의질연구
• /
• 제30권3호
• /
• pp.105-118
• /
• 2012

This study aims to recognize cognition of credit card and shopping value in contemporary society, cognition of credit card and shopping value according to types of consumption orientation, and factors that influence cognition of credit card and shopping value, and ultimately provide a foundation for establishing proper shopping value. A total of 453 women and men residing in Seoul have been set as research object in order to achieve the purpose of the study. The data was analyzed by Cronbach' alpha, frequencies, percentile, mean, factor analysis, K-mean cluster analysis, t-test, ANOVA and Duncan's multiple range test, multiple linear regression. All analysis progress was done by spsswin12.0 statistics program. A summary of this research goes as follows: First, categorization of consumption orientation lead to two clusters of rational and symbolic & conspicuity consumption patterns and cognition of credit card was categorized into positive and negative cognition and shopping value was categorized into hedonic shopping value, utilitarian shopping value and time-save shopping value. Second, rational shoppers had high utilitarian shopping values and symbolic & conspicuity shoppers had high both hedonic shopping values and utilitarian shopping values. Third, the most influential factor in hedonic shopping value and utilitarian was consumption orientation. In conclusion, this research has showed that cognition of credit card and shopping value according to types of consumption orientation patterns varied, and that consumption orientation was an influential factor on cognition of credit card and shopping value.

• The Journal of Advanced Prosthodontics
• /
• 제3권3호
• /
• pp.136-139
• /
• 2011

PURPOSE. A new light curing urethane dimethacrylate and a cold curing resin with simpler and faster laboratory procedures may have even improved flexural properties. This study investigated the 3-point flexural strengths and flexural moduli of two alternate base materials. MATERIALS AND METHODS. A cold curing resin (Weropress) and a light curing urethane dimethacrylate base material (Eclipse). Along with Eclipse and Weropress, a high impact resin (Lucitone199) and three conventional base materials (QC 20, Meliodent and Paladent 20) were tested. A 3-point bending test was used to determine the flexural strengths and flexural moduli. The mean displacement, maximum load, flexural modulus and flexural strength values and standard deviations for each group were analyzed by means of one-way analysis of variance (ANOVA) (with mean difference significant at the 0.05 level). Post hoc analyses (Scheffe test) were carried out to determine the differences between the groups at a confidence level of 95%. RESULTS. Flexural strength, displacement and force maximum load values of Eclipse were significantly different from other base materials. Displacement values of QC 20 were significantly different from Lucitone 199 and Weropress. CONCLUSION. The flexural properties and simpler processing technique of Eclipse system presents an advantageous alternative to conventional base resins and Weropress offers another simple laboratory technique.

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.399-408
• /
• 2006

Nucleate pool boiling heat transfer coefficient (HTCs) were measured with one nonazeotropic mixture of propane/isobutane and two azeotropic mixtures of HFC134a/isobutane and propane/HFC 134a. All data were taken at the liquid pool temperature of $7^{\circ}C$ on a horizontal plain tube of 19.0mm outside diameter with heat fluxes of $10\;kW/m^2\;to\;80kW/m^2$ with an interval of $10\;kW/m^2$ in the decreasing order of heat flux. The measurements were made through electrical heating by a cartridge heater. The nonazeotropic mixture of propane/isobutane showed a reduction of HTCs as much as 41% from the ideal values. The azeotropic mixtures of HFC134a/isobutane and propane/HFC134a showed a reduction of HTCs as much as 44% from the ideal values at compositions other than azeotropic compositions. At azeotropic compositions, however, the HTCs were even higher than the ideal values due to the increase in the vapor pressure. For all mixtures, the reduction in heat transfer was greater with larger gliding temperature difference. Stephan and Korner's and lung et al's correlations predicted the HTCs of mixtures with a mean deviation of 11%. The largest mean deviation occurred at the azeotropic compositions of HFC134a/isobutane and propane/HFC134a.