• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.252-257
• /
• 1998

국내 원전에 신뢰도 기반 정비(RCM : Reliability Centered Maintenance) 기법을 도입하기 위해 수행하고 있는 영광 1,2호기 시법계통 RCM 분석에서 관련 기기의 고장데이터를 RCM 분석 방법론에 따라 분석하였다. 본 논문에서는 작업의뢰서와 작업보고서 기록내용을 토대로 지배적인 고장모드 및 다빈도 고장발생 기기를 파악하여 고장원인을 분석하였으며, 기기 유형으로 분류하여 고장들을 분석하였다. 분석결과 지배적인 고장모드는 EPRI에서 분류한 고장모드에 모두 포함되었으며, 고장빈도가 높은 기기의 고장원인은 운전환경, 사용유체, 운전형태, 기기 형식 등에 따라 고장메커니즘이 다르게 나타나는 것으로 분석되었다. 기기 유형으로 분류하여 고장모드별로 고장율을 분석한 결과 미국의 Generic Data(IEEE Std 500-1984)와 근소한 차이를 보이거나 약간 낮은 것으로 분석되었으며, 고장율이 높은 기기 유형을 단위 기기별로 세분화하여 분석한 결과 공기구동 조절벨브의 외부누설 고장율은 1.10E-06 이지만 충전유량 조절밸브의 고장율은 1.70E-05로서 약 10배 정도로 고장율이 높은 것으로 분석되었다. 기기별로 세분화한 고장을 분석 결과는 시범계통 RCM 분석시 고장모드 영향분석(FMEA. Failure Mode and Effective Analysis) 단계에서 필수기기를 선정하는 하나의 인자로 활용하였으며, 고장율의 역수로 구한 고장간 평균시간(MTBF:Mean Time Between Failure)은 정비주기 선정시 기초데이터로 활용된다.

• Hip & pelvis
• /
• v.35 no.1
• /
• pp.40-46
• /
• 2023

Purpose: A variety of short Exeter stems designed specifically for use in performance of total hip arthroplasty (THA) in primary and revision settings have recently been introduced. Some have been used 'off label' for hip reconstruction. The aim of this study is to report clinical and radiological results from the Exeter V40 125 mm stem in performance of primary THA and revision THA. Materials and Methods: This study had a retrospective design. Insertion of 58 (24 primary, 34 revision) Exeter V40 125 mm stems was performed between 2015 and 2017. The minimum follow-up period was two years. Assessment of the Oxford hip score (OHS), EuroQol-5 Dimension (EQ-5D), and radiological follow-up was performed at one and two years. Results: In the primary group, the preoperative, mean OHS was 13.29. The mean OHS was 32.86 and 23.39 at one-year and two-year post-surgery, respectively. The mean EQ-5D-3L scores were at 0.14, 0.59, and 0.35, preoperatively, at one-year follow-up and two-year follow-up, respectively. In the revision group, the mean preoperative OHS was 19.41. The mean OHS was 30.55 and 26.05 at one-year and two-year post-surgery, respectively. The mean EQ-5D-3L scores were 0.33, 0.61, and 0.48 preoperatively, at one-year follow-up and two-year follow-up, respectively. No progressive or new radiolucent lines were observed around any stem at the time of the final follow-up in all patients in both groups. Conclusion: Encouraging results regarding use of Exeter V40 125 mm stems have been reported up to two years following surgery in primary and revision THA settings.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.12
• /
• pp.253-276
• /
• 1999

CISG articles 34 and 37 clearly allow the seller to cure any nonconformity in documents of sale or performance prior to the date for delivery if it does not cause the buyer unreasonable inconvenience or unreasonable expense. CISG article 48 allows a seller to cure the performance even after the date for delivery if it does not cause the buyer unreasonable delay, unreasonable inconvenience or unreasonable uncertainty of reimbursement by the seller of expenses advanced by the buyer. The wording any failure to perform is broad enough to include a delay. The seller's right to cure relates to all his obligations. The seller may remedy 'any failure to perform his obligations'. This language is broad enough to include a defect in documents. In some cases the fact that the seller is able and willing to remedy the non-conformity of the goods without inconvenience to the buyer, may mean that there would be no fundamental breach unless the seller failed to remedy the non-conformity within an appropriate time. It cannot generally be said what unreasonable inconvenience means. This can only be decided on a case-by-case basis. The seller must bear the costs involved in remedying a failure to perform. The curing of a failure to perform may have influence on the amount of the damage claimed. Insofar as the seller has the right to cure, the buyer is in that case obliged to accept the cure. If he refuses to do so, he can neither avoid the contract nor declare a reduction in price. This rule clearly shows the underlying concept of the CISG, to keep to the contract, if possible. Should the buyer requires delivery of substitute goods and the seller offers repair, it depends on the expense each case. The buyer must receive the request or notice by the seller. The relationship between the seller's right to cure and the buyer's right to avoid the contract is unclear. The buyer's right to avoid the contract should not nullify the seller's right to cure if the offer is reasonable. In addition, whether a breach is fundamental should be decided in the right of the seller's offer to cure.

• The KIPS Transactions:PartD
• /
• v.9D no.3
• /
• pp.389-398
• /
• 2002

Software reliability growth models are used in testing stages of software development to model the error content and time intervals between software failures. This paper presents a stochastic model for the software failure phenomenon based on a nonhomogeneous Poisson process(NHPP) and performs Bayesian inference using prior information. The failure process is analyzed to develop a suitable mean value function for the NHPP ; expressions are given for several performance measure. Actual software failure data are compared with several model on the constant reflecting the quality of testing. The performance measures and parametric inferences of the suggested models using Rayleigh distribution and Laplace distribution are discussed. The results of the suggested models are applied to real software failure data and compared with Goel model. Tools of parameter point inference and 95% credible intereval was used method of Gibbs sampling. In this paper, model selection using the sum of the squared errors was employed. The numerical example by NTDS data was illustrated.

• The KIPS Transactions:PartD
• /
• v.8D no.6
• /
• pp.835-842
• /
• 2001

We propose a software-reliability growth model incoporating the amount of testing effort expended during the software testing phase. The time-dependent behavior of testing effort expenditures is described by a Weibull curve. Assuming that the error detection rate to the amount of testing effort spent during the testing phase is proportional to the current error content, a software-reliability growth model is formulated by a nonhomogeneous Poisson process. Using this model the method of data analysis for software reliability measurement is developed. After defining a software reliability, we discuss the relations between testing time and reliability and between duration following failure fixing and reliability are studied in this paper. The release time making the testing cost to be minimum is determined through studying the cost for each condition. Also, the release time is determined depending on the conditions of the specified reliability. The optimum release time is determined by simultaneously studying optimum release time issue that determines both the cost related time and the specified reliability related time.

• Journal of Chest Surgery
• /
• v.28 no.1
• /
• pp.23-30
• /
• 1995

From January 1985 to December 1992, of 1257 patients who underwent a heart valve replacement 210 [16.8% underwent reoperation on prosthetic heart valves, and 6 of them had a second valve reoperation. The indications for reoperation were structural deterioration [176 cases, 81.5% , prosthetic valve endocarditis [25 cases, 11.6% , paravalvular leak [12 cases, 5.6% , valve thrombosis [2 cases, 0.9% and ascending aortic aneurysm [1 case, 0.4% . Prosthetic valve failure developed most frequently in mitral position [57.9% and prosthetic valve endocarditis and paravalvular leak developed significantly in the aortic valve [40%, 75% [P<0.02 . Mean intervals between the primary valve operation and reoperation were 105.3$\pm$28.4 months in the case of prosthetic valve failure, 61.5$\pm$38.5 months in prosthetic valve endocarditis, 26.8$\pm$31.2 months in paravalvualr leak, and 25.0$\pm$7.0 months in valve thrombosis. In bioprostheses, the intervals were in 102.0$\pm$23.9 months in the aortic valve, and 103.6$\pm$30.8 months in the mitral valve. The overall hospital mortality rate was 7.9% [17/26 : 15% in aortic valve reoperation [6/40 , 6.5% in reoperation on the mitral prostheses [9/135 and 5.7% in multiple valve replacement [2.35 . Low cardiac output syndrome was the most common cause of death [70.6% . Advanced New York Heart Association class [P=0.00298 , explant period [P=0.0031 , aortic cross-clamp time [P=0.0070 , prosthetic valve endocarditis [P=0.0101 , paravalvularr leak [P=0.0096 , and second reoperation [P=0.00036 were the independent risk factors, but age, sex, valve position and multiple valve replacement did not have any influence on operative mortality. Mean follow up period was 38.6$\pm$24.5 months and total patient follow up period was 633.3 patient year. Actuarial survival at 8 year was 97.3$\pm$3.0% and 5 year event-free survival was 80.0$\pm$13.7%. The surgical risk of reoperation on heart valve prostheses in the advanced NYHA class patients is higher, so reoperation before severe hemodynamic impairment occurs is recommended.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.49 no.1
• /
• pp.13-20
• /
• 2023

Objectives: Ultra-wide implants may be used as a replacement if existing implants fail. This study was conducted to evaluate the factors influencing the prognosis and failure of ultra-wide implants. Patients and Methods: This study evaluated whether sex, age, site, diameter, length, additional surgery, implant stability (primary and secondary), and reason for ultra-wide implant placement affect the 5-year survival and success rates and marginal bone loss (MBL) of ultra-wide implants. Seventy-eight ultra-wide implants that were placed in 71 patients (39 males and 32 females) from 2008 to 2010 were studied. One-way ANOVA analysis was conducted to evaluate the statistical significance of MBL according to the patient's sex, implant site, and diameter. Independent sample t-tests were used to determine the statistical significance of MBL analysis which was used to determine the significance of the 5-year success and survival rates related to the variables. One-way ANOVA was conducted to evaluate the statistical significance of sex, implantation site, diameter, and MBL. Independent sample t-tests were used to evaluate the correlation between implantability and MBL for implantation reasons, while additional surgery, length, and Kaplan-Meier analysis were used to evaluate 5-year survival and success rates. Results: The mean age of patients was 54.2 years with a survival rate of 92.3% and a success rate of 83.3% over a mean 97.8-month period of observation. MBL averaged 0.2 mm after one year of prosthetic function loading and 0.54 mm at the time of final observation. Success rates correlated with primary stability (P=0.045), survival rates correlated with secondary stability (P=0.036), and MBL did not correlate with any variables. Conclusion: Ultra-wide implants can be used to achieve secure initial fixation in the maxillary and mandibular molar regions with poor bone quality or for alternative purposes in cases of previous implant failure.

• Journal of Korean Neurosurgical Society
• /
• v.49 no.2
• /
• pp.92-96
• /
• 2011

Objective : We retrospectively evaluated the prognostic factors that can influence long-term survival in patients who suffered acute large cerebral infarction. Methods : Between June 2003 and October 2008, a total of 178 patients were diagnosed with a large cerebral infarction, and, among them, 122 patients were alive one month after the onset of stroke. We investigated the multiple factors that might have influenced the life expectancies of these 122 patients. Results : The mean age of the patients was $70{\pm}13.4$ years and the mean survival was $41.7{\pm}2.8$ months. The mean survival of the poor functional outcome group ($mRS{\geq}4$) was $33.9{\pm}3.3$ months, whereas that of the good functional outcome group ($mRS{\leq}3$) was $58.6{\pm}2.6$ months (p value=0.000). The mean survival of the older patients (270 years) was $29.7{\pm}3.4$ months, whereas that of the younger patients (<70 years) was much better as $58.9{\pm}3.2$ months (p value=0.000). Involvement of ACA or PCA territory in MCA infarction is also a poor prognostic factor (p value=0.021). But, other factors that are also known as significant predictors of poor survival (male gender, hypertension, heart failure, atrial fibrillation, diabetes mellitus, a previous history of stroke, smoking, and dyslipidemia) did not significantly influence the mean survival time in the current study. Conclusion : Age (older versus younger than 70 years old) and functional outcome at one month could be critical prognostic factors for survival after acute large cerebral infarction. Involvement of ACA or PCA territory is also an important poor prognostic factor in patients with MCA territorial infarction.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.2
• /
• pp.77-81
• /
• 2007

Objective : In a variety of thoracolumbar diseases, corpectomy followed by interbody bone graft and anterior instrumentation has allowed direct neural decompression and reconstruction of the weight-bearing column by short segments fusion. In this study, we compared spinal stability of the two different anterior thoracolumbar instruments : Z-plate and Kaneda device representing plate and two-rods type, respectively. Methods : A retrospective review was performed for all the patients with thoracolumbar diseases or traumas treated with anterior corpectomy, autologous iliac bone graft, and fixation with instruments from 1996 to 2000. For the anterior instrumentation, Z-plate or Kaneda device was used for 24 [M:F=5:9, average age=37] and 12 [M:F=9:3, average age=41] patients, respectively. The plain AP and lateral flexion-extension films were taken immediately after surgery and at each follow-up. The sagittal and coronal Cobb's angles at the operation segments were used to observe the change of initial fixation status. The surgical time length and bleeding amount of the two groups were compared. Intra-operative and post-operative instrument associated complications were evaluated. Student t-test was used for statistical analysis and p-value less than 0.05 was considered to be significant. Results : Mean follow-up durations for Z-plate and Kaneda device were 24 and 21 months, respectively. The fusion rate was 91% for Z-plate and 100% for Kaneda device. Two cases of Z-plate group showed instrumentation failure during the follow up period, in which additional surgery was necessary. The mean differences of sagittal Cobb's angles among the AP images immediate after surgery and at follow-up were 7 and 2 degrees for Z-plate and Kaneda device, respectively [p<0.05]. The mean differences of coronal Cobb's angles were 5 and 2 degrees for Z-plate and Kaneda device, respectively [p<0.05]. No Intra-operative complication has occurred in both groups. There was no difference in surgery time and bleeding amount between two groups. Conclusion : We think that Kaneda device [rod type] is stronger than Z-plate [plate type] to keep the spinal stability after anterior thoracolumbar surgery.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.2
• /
• pp.1-8
• /
• 2011

In this study, software products developed in the course of testing, software managers in the process of testing software test and test tools for effective learning effects perspective has been studied using the NHPP software. The finite failure non-homogeneous Poisson process models presented and the life distribution applied extreme distribution which used to find the minimum (or the maximum) of a number of samples of various distributions. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. As a result, the learning factor is greater than automatic error that is generally efficient model could be confirmed. This paper, a numerical example of applying using time between failures and parameter estimation using maximum likelihood estimation method, after the efficiency of the data through trend analysis model selection were efficient using the mean square error.