• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.861-869
• /
• 2012

The chlorine's residual concentration prevents the regrowth of microorganism in water transport along the pipeline system. Precise prediction of chlorine concentration is important in determining disinfectant injection for the water distribution system. In this study, a pilot scale water distribution system was designed and fabricated to measure the temporal variation of chlorine concentration for three flow conditions (V = 0.88, 1.33, 1.95 m/s). Various kinetic models were applied to identify the relationship between hydraulic condition and chlorine decay. Genetic Algorithm (GA) was integrated into five kinetic models and time series of chlorine were used to calibrate parameters. Model fitness was compared by Root Mean Square Error (RMSE) between measurement and prediction. Limited first order model and Parallel first order showed good fitness for prediction of chlorine concentration.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.6
• /
• pp.274-284
• /
• 1995

The effect of turbulence and ignition energy on flame kernel growth in mathanol-air mixtures has been studied in a constant volume vessel. Experiments were made under different turbulent intensity conditions, ignition energy and over a range of equivalence ratio. Characteristics of turbulent flow were grasped by measurments of gas pressure and visualization of flame propagation. Flow velocity was measured by use of hot wire anemometer. A comparison of the effect of turbulence on ignition probability and flame kernel volume variation ratio is also presented.

• Journal of the Korean Institute of Navigation
• /
• v.7 no.2
• /
• pp.47-63
• /
• 1983

In this paper, we have investigated the tidal characteristics of the Nakdongpo estuary. We have carried out the analysis of harmonic constant with the use of the recorded data on tidal level at the Gadeong Do tide station and analyzed the flow velocity data obtained by ourselves at two points in the Nakdongpo estuary. In addition, we have analyzed the variation of the mean-sea level. Typical items of the characteristics we have found are; (1) The principal harmonic constants and non-harmonic constants are shown in table 2. (2) Tide in this area shows the semidiurnal inequality. (3) The mean-sea level is shown to be depressed at the rate of about 1cm to the rise of 1 mbar of the atmospheric pressure. (4) (i) At $K_2$ point, The E-W component of the velocty reveals the nature of progressive waves. The N-S component reveals the nature of stationary waves. (ii) At $K_3$ point, The E-W component shows the characteristics of progressive waves to some degree. The N-S component shows a weak hint of stationary waves. (5) At $K_2$ point, S-component is predominant due to the flow of river. At $K_3$ point, E-component is predominant due to the Tsushima current.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4307-4326
• /
• 2024

This study investigates Equivalent Spherical Diameter (ESD) estimation at high inlet velocity pool scrubbing conditions using the Interfacial Area Transport Equation (IATE) diameter model including bubble-induced turbulence and interphase modeling. The compatibility of area-averaged Sauter Mean Diameter (SMD), areaaveraged Local Equivalent Diameter (LED) and void-weighted area-averaged LED approaches to estimate the ESD are explored and the proposed model is validated against available experimental data. The study reveals that the prevalent constant ESD assumption in pool scrubbing codes is not universal by showcasing a decreasing trend along the column due to intensive bubble breakup. The area-averaged LED approach fails to capture this trend, while the area-averaged SMD and void-weighted area-averaged LED approaches provide accurate estimations aligned with experimental data. Turbulence parameters, interfacial forces, and diameter modeling are identified as crucial for accurate predictions of flow and geometrical variables by setting up the OpenFOAM framework. A sensitivity analysis indicates that the inlet velocity has an acceptable effect on the ESD along the column. The ESD increases near the exit and decreases in the swarm region by increasing the inlet velocities. Turbulent intensity reduces ESD across all column sections while changes in aspect ratio minimally impact ESD. The study shows promise in developing correlations that take into account the spatial variation of ESD in pool scrubbing conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.343-352
• /
• 2011

The water quantity by intake station as well as the tributary flow discharge acting as sink or source were added to the main flow rate in the present study and RMA-2 and RMA-4 models were applied to the reach from Pal-dang dam to Jam-sil submerged weir to investigate the influence of water supply withdrawal on the river flow and water quality. The numerical results revealed that the water supply withdrawal from 5 intake stations located upstream of Jam-sil submerged weir changed the total flow rate and therby induced different hydraulic characteristics in terms of water surface elevation and velocity. The changed flow field by the inclusion of water intake quantity led to the variation of water quality. By the consideration of the water supply withdrawal, the velocity structure was significantly disturbed by the outflowing flow condition nearby Gu-ui, Ja-yang, and Pung-nap intake stations. Furthermore, the mean velocity was lowered by 25% and the stage upstream of Gu-ui station rose upto 1.5 cm compared with the result by exclusion of water intake. In case of no water withdrawal, the distribution of BOD concentration was parallel throughout the domain. However, when the water withdrawal is considered, the distribution of BOD concentration nearby the Gu-ui, Am-sa, and Ja-yang station was signifiantly changed. In addition, the BOD concentration including the intake stations showed higher value at the downstream of the reach due to the loss of the discharge by water withdrawal effect. It is concluded that both the inflow and outflow discharges from tributaries and water intake stations should be included in the numerical simulation to analyze the hydrodynamic behaviors and mixing characteristics more accurately.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.1
• /
• pp.57-62
• /
• 2011

The effects of swirl chamber's diameter and length on injector's dynamic characteristics were investigated through an experimental study. A mechanical pulsator was installed in front of the manifold of a swirl injector which produces pressure oscillations in the feed line. Pressure in the manifold, liquid film thickness in the orifice and the pressure in the orifice were measured in order to understand the dynamic characteristic of the simplex swirl injector with varying geometry. A direct pressure measuring method (DPMM) was used to calculate the axial velocity of the propellant in the orifice and the mass flow rate through the orifice. These measured and calculated values were analyzed to observe the amplitude and phase differences between the input value in the manifold and the output values in the orifice. As a result, a phase-amplitude diagram was obtained which exhibits the injector's response to certain pressure fluctuation inputs. The mass flow rate was calculated by the DPMM and measured directly through the actual injection. The effect of mean manifold pressure change was insignificant with the frequency range of manifold pressure oscillation used in this experiment. Mass flow rate was measured with the variation of injector's geometries and amplitude of the mass flow rate was observed with geometry and pulsation frequency variation. It was confirmed that the swirl chamber diameter and length affect an injector's dynamic characteristics. Furthermore, the direction of geometry change for achieving dynamic stability in the injector was suggested.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.29 no.3
• /
• pp.200-213
• /
• 1993

A model experiment on a midwater rope trawl net which is used in the North Pacific to catch alaska pollack is carried out in the circulating tank to examine the basic efficiency of the net. The prototype is the net used by M/S Hanil(1, 179GT, 2, 700PS), a Korean trawler. The model net was made according to the Tauti's Similarity Law of Fishing Gear in 1/100 scale by considering the condition of the tank. To measure the basic efficiency of the standard model net, the vertical opening and width between some points marked on the net were measured, and the hydrodynamic resistance were determined. Then the constructive conditions of the net were varied as follows and the factors were measured again to compare the efficiency of those nets with that of the standard net(A-1 type) front weight multiplied 1.5 times: A-2 type. buoyancy and depressing force multiplied 1.7 times: A-3 type. front weight multiplied 1.5 times on A-3 type: A-4 type. depressors rigged at ground rope: B type. cod-end stuffed with cashmylon wad: C type. The results obtained can be summarized as follows: 1. The vertical opening at the center of head rope was steeply decreased with the flow velocity increasing and the vertical opening H(m) can be expressed in H=1.2v super(-1.2)(v : flow velocity in m/sec). The width of the net varied a little when the flow velocity was over 0.4m/sec, and the width of net mouth showed about 37% of the distance between the fore tips of net pendant. The shape of net mouth was almost a circle at 0.2m/sec and then steeply flatted elliptically with the flow velocity increasing and the area of mouth S(m super(2)) can be expressed in S=(1.65-2.3v)$\times$10 super(-2). The hydrodynamic resistance of the net increased almost linearly with the flow velocity increasing and the resistance R(kg) can be expressed in R=3.2$\times$d/l$\times$abv. where d/l denotes the mean of d(diameter of netting twine) and l(length of a leg in a mesh) from wing tip to the end of bag-net except cod-end on the side pannel, and a denotes the strectched circumference of the net at the fore end of a meshed part and b the stretched length of the whole net from wing tip to the end of cod-end. 2. In the condition-varied nets, the vertical opening of head rope showed some increase in every type net except the C type, and the increase showed the greatest in the B type by 30~54%, whereas it showed decrease in the C type by 5~10%. Variation of the area of net mouth showed almost the same tendency as the vertical opening and the increase showed the greatest in the B type by 20%, whereas it showed decrease in the C type by 12%. Hydrodynamic resistance showed some increase in every type compared with the standard net, and the rate of increase indicated 5~10% in the A-2, A-3 and A-4 type, 22% in the B type and 3% in the C type.

• International Journal of High-Rise Buildings
• /
• v.11 no.4
• /
• pp.241-263
• /
• 2022

The conventional wind and twisted-wind effect on aerodynamic properties of neighboring buildings arranged in side-by-side and tandem systems at 2B and 5B spacings are systematically investigated by large eddy simulation. Different physical interactions between different wind profiles and neighboring buildings will be deeply understood. The neighboring-building system under two different types of wind profiles, i.e., conventional wind profile (CWP), twisted wind profiles (TWP) with the maximum twisted angle of 30°, is used to evaluate the variation of physical mechanism between wind and buildings. Aerodynamic characteristics including mean and RMS pressure coefficient, and velocity field were systematically analyzed and compared between different scenario. It was found that the distribution of mean pressure, root-mean-square x velocity and the streamline of wind flow for TWP greatly deviated from CWP, and the effect of TWP on the downstream building, was drastically different from that of CWP, such as the size of vortexes after the lower stream building being bigger when exposed to TWP, and the mean pressure distribution on the building surfaces are also different. Moreover, evidence of buildings arranged in side-by-side and tandem configurations having interchangeable properties under TWP was also discovered, that two buildings being arranged side-by-side exposed to TWP could be identified as being arranged in tandem with a different wind twist angle, or vice versa.

• Water Engineering Research
• /
• v.1 no.4
• /
• pp.299-307
• /
• 2000

The method for estimating the minimum instream flows required for the riverline aesthetics, proposed by the Kim et al.(1996), has been applied to the main channel reach of the Keum river basin in Korea. To determine the minimum instream flows for eight main reaches at Keum river basin, six representative stations have been selected. This paper provides an analysis of influence on the riverline aesthetics, which is affected by change of physical components of river, by using the survey-based quantification method. The developed questionnaire based on the literature, and submitted to the 326 people who visited an each representative station. This surveying had been implemented in three times at each representative station and we had been selected a different flowrate at each implementation. The results of this analysis and survey have produced the relationship between the variation of physical components and riverline aesthetics. Survey results bout the flow comparison are summarized as follows. At the view of riverline aesthetics, most of the respondents re sensitive at the change of the flow velocity and they prefer high water level to low water level. Moreover whole respondents prefer to abundant stream flows and moderate flow velocity. The minimum flows for riverline aesthetics is estimated at each representative station by using the survey-based quantification method and the estimated results of some representative station are greater than mean monthly flow at each station. The result of the analysis appears that establishing minimum instream flows for riverline aesthetics is not only a technical problem but a legal problem. Therefore in the case of establishing the instream flows in the river, the estimated results have to be considered as relative standard.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.3
• /
• pp.61-71
• /
• 1988

The stage-discharge relation curve(rating curve) is the basic formula in hydrologic analysis. It plays an important role in converting to the discharge from available flood water level data including the daily mean stage. However, the river induces a cross section change at the gauging station because of the composed material of the river bed and three processes of the stream flow; i.e., erosion, transportation, and sedimentation. Rating curve has to be revised according to the temporal variation of the river bed due to the those factors. In this study, the basic rating curve is developed with respect to the current river bed to convert the existing rating curves and also to seize the hydraulic and geometric characteristics for the temporal variation of the river bed, relationships among the basic rating curve and the existing rating curves, water level, cross sectional area, and flow velocity are analyzed. Indogyo station, which is not only the key station of the Han river but also greatly changed the river bed after completion of the Han river development plan during the year 1983 to 1986, was chosen for the study. In this study, the river bed is assumed in a dynamic equilibrium condition. The basic rating curve is developed using hydrologic data of the physical year of 1987. For a given discharge, relationships for conversion of previous data, stage and velocity, the current one are formulated. To verify the usefulness of the relationships, stage-cross sectional area and stage velocity formula are also derived. Both hydrologic method using continuity equation and statistical method by the rating curve are compared and checked, then the validation of the both are positively shown.